This is kind of what I was thinking.  What is that stuff wrapped around the line?

hey, i didn't have that type of tape. that is looking real cool. where did you get that at?

it was covered with just a neoprene foam cutout.
but my chiller only went to 32F or 0C

johnksss

hey, i didn't have that type of tape. that is looking real cool. where did you get that at?

it was covered with just a neoprene foam cutout.
but my chiller only went to 32F or 0C

Your chiller only went down to 0c? what were temps like with it?

hard to say...with my 38 batch cpu, i could run 4.75ghz benchies
with my 39 batch cpus, it was a task to run 4.6ghz


Johnksss 
Core i7 920 D0 Batch #:3849A846 
CPU Clocked at: 4629.7 MHz 
Voltage: 1.6 
Idle temps: 26,25,29,20 
Load temps: 85,83,77,71 

johnksss

hard to say...with my 38 batch cpu, i could run 4.75ghz benchies
with my 39 batch cpus, it was a task to run 4.6ghz


Johnksss 
Core i7 920 D0 Batch #:3849A846 
CPU Clocked at: 4629.7 MHz 
Voltage: 1.6 
Idle temps: 26,25,29,20 
Load temps: 85,83,77,71 

Highest ive done Vantage consistently is 4.6ghz 1.53125v set in the BIOS w\o VDroop. After several runs it wants more volts too so I have to let it rest for a bit before it wants to do it at the lower voltage.

I cant do 3mark06 at 4.6ghz at all either, I think I had to settle for 4.55ghz, but I havent played with it at all. Kind of a waste of time  because with only a quad at 4.6ghz im not going to net much on HWbot.

EDIT:

My batch is 3913B

then wait a bit to do vantage and 3dmark06
but you can take that and run with it doing
2001
2003
2005
aquamark

you should be-able to raise about 150 mhz with same voltage and get some decent numbers.

Running 01 on anything but Wolfdale is pointless. 05 is just as CPU heavy as 06, not sure what kind of clocks you can use on it though. Cant get Aquamark to work, it just crashes right after double clicking the shortcut 

Ive pretty much done all the 3D I can do on stock air. Going to have to wait until I get a block for this card to do more TBH. Then ill have to build a chiller.

Rudster816

Running 01 on anything but Wolfdale is pointless. <-- i beg to differ...you just have to better to compete is all. keeping a closed mind and you'll never make any head way there. i have caught all sorts of dual core cpus. so i know you can too.


05 is just as CPU heavy as 06, <--nope, but you may need to balance out your over clock for gpus in stead of cpus


not sure what kind of clocks you can use on it though. <--i have benched vantage up to 4.94ghz (dice) 4.8ghz (ss - but iffy)


Cant get Aquamark to work, it just crashes right after double clicking the shortcut  <--you need the updated file
[font="verdana, arial, sans-serif; line-height: normal; font-size: 11px; "]http://www.techpowerup.com/downloads/387/Direcpll_for_Aquamark_3.html
replace yours with this one.

Ive pretty much done all the 3D I can do on stock air. Going to have to wait until I get a block for this card to do more TBH. Then ill have to build a chiller.

and now that im at the end...you are completely right...your pretty much at your limits. air is cool and all..but you wont be setting any mass records with it.

just a little water on your cpu can go far.....

and nothing is pointless here!
you either get in there and make it happen or you don't.
evga enthusiasts don't do pointless! every point counts here! always remember that.

http://i175.photobucket.c...udster816/71203-01.png



Thats just stupid slow, doesnt get me more than .1 points on the bot either. But your right, nothing on HWBot is pointless, everything will get you at least .1 points! And no way is an ATI card getting you global points on 01.

I replaced the file for Aquamark and it still doesnt work.

My CPU is on water right now. I dont think I would be doing 4.6ghz vantage on air!

Rudster816

http://i175.photobucket.c...udster816/71203-01.png



Thats just stupid slow, doesnt get me more than .1 points on the bot either. But your right, nothing on HWBot is pointless, everything will get you at least .1 points! And no way is an ATI card getting you global points on 01.

I replaced the file for Aquamark and it still doesnt work.

My CPU is on water right now. I dont think I would be doing 4.6ghz vantage on air!

1: your benching the wrong os for that.
2: today...no..but when they first came out...they we're up for global all day long.
3: uninstall aquamark and grab another copy. install it and then replace the file with the updated one. if that doesn't work. try it under xp
4: i think you better ask awalleyeguy who benched pretty damn high on air. and nordijedi and a few others. me...4.5 ghz on air

benching has to do with spending a great deal of time finding the right chip and settings before actually doing the full bench.
and i couldn't get my 5870 high enough to submit for anything in 2001, so i let it go...but my old hand me down cards i had..did. so they more than made up for me not getting anything there....
#19. 3Dmark 2001 - 17293 marks - johnksss (EVGA Enthusiasts) - (Nvidia GeForce 7300 SE @640/540MHz) 2.0 points and a gold

is far better than .01 and nothing. 
that made up for the 5870/2001se..


the .01 is a learning curve.. and counts for a submission towards your achievements. 
you can either improvise or complain....i tend to improvise....