NO. Only remove the fan on the EVAP ONLY. The condenser will get hot, so it will still need the fan in order for your evap to get the lowest possible temps.

Hard to tell which is the condenser\evap though from just the pic.

Rudster816

NO. Only remove the fan on the EVAP ONLY. The condenser will get hot, so it will still need the fan in order for your evap to get the lowest possible temps.

Hard to tell which is the condenser\evap though from just the pic.

He only has the evap fan circled.  You must be looking through that window of yours. 
Its quite easy to tell which is the evap, and which is the condenser in the pic.  The condenser has the fan that is not a squirrel cage..

nateman_doo

Rudster816

NO. Only remove the fan on the EVAP ONLY. The condenser will get hot, so it will still need the fan in order for your evap to get the lowest possible temps.

Hard to tell which is the condenser\evap though from just the pic.

He only has the evap fan circled.  You must be looking through that window of yours. 
Its quite easy to tell which is the evap, and which is the condenser in the pic.  The condenser has the fan that is not a squirrel cage..

The seal on the window is broken (Double pane, im sure you have those in New Jersey as well). We are waiting for it to get a bit warmer to get it re sealed.

Working on getting worm drives too.

What's a worm drive?

I think its what CD Rom's were originally called?  Write Once Read Many. 

q while your in the building stages you might want to pick up a high flow block if you dont have one already I used a swiftech and im pretty sure it really stifled the performance of the chiller. I read somewhere that enzotech actually makes the block with the highest flow rate, not the best heat dissipation though but that shouldnt matter a whole lot with a chiller hooked up to it. I think?????

Or he could make a Nateman special ghetto block.

xxrabid93

Or he could make a Nateman special ghetto block.

yeah...that ghetto block of nates got me quite a few points...from both ends of the spectrum.
what it's intended purpose was to do

yea that block looks great. Ive been buying a few things here and there so I can learn how to weld copper the welding part looks easy enough. After making some phone calls I found a drill press I can use too

is this a block hooked up to a dewar????? Does it pump like a keg???? right here