2010/03/30 10:34:34
reggiesanchez
if by cheating you mean keeping my gpu at a cool 8 degrees then yes I cheat guilty as charged
2010/03/30 10:55:49
Rudster816
reggiesanchez

if by cheating you mean keeping my gpu at a cool 8 degrees then yes I cheat guilty as charged


Exactly, your cheating.
2010/03/30 12:12:15
nateman_doo
Rudster816

What im doing right now.


put THAT outside!  or in front of an open window... then you will be doing juuust fine.
2010/03/30 12:57:04
johnksss
+1 on the outside
2010/03/30 15:41:21
Rudster816
nateman_doo

Rudster816

What im doing right now.


put THAT outside!  or in front of an open window... then you will be doing juuust fine.


See that big fan? Yeah, thats sitting in a window cell with the window wide open

That run didnt pan out, my GPU didnt want to put out the FPS that it should have been doing. I was getting GPU scores that were 20.5k when they should be 21.7k.

I bought my kneaded eraser finally though, so I got that to work on now
2010/03/30 16:40:18
xxrabid93
Starting to work on insulating my DFI board as i type this...
2010/03/30 17:32:31
Q56_Monster
Rudster, the fan is blowing the wrong way.  Blow the air at the back of the card, not the front.  And take the fan screen off, you'll get better air velocity
2010/03/30 17:49:23
nateman_doo
Remember I said I had 1 crappy 295 that never went above 800/1200?  I know the ram still stunk, but I wonder if this had anything to do with the crappy gpu clocks:




The GPU temps were just fine according to precision, but the ram on the boards wouldn't go past 1200 either and ram timings make ALL the difference in the world!

Attached Image(s)

2010/03/30 17:54:26
johnksss
that would have a lot to do with things....

check me out now...i moved up to 11th place 5970...i was on a world recored run when i ran out of dice...crashed at the last few seconds...grrrrrrrrrrrrrrrrrrrr!



edit:

see how it's dry...is that where the ram chips are? meaning up above and to the right and left?
if so..means your ram wasn't covered tightly enough as well. you only need to look at the pads and see if they are all indented deep or light or not at all....
2010/03/30 18:04:54
hellshealer
hey are the AMD processors good for anything on the bot im looking at buying an ati set up but i cant seem to find anything that they are good at :S

Use My Existing Forum Account

Use My Social Media Account