ajr23

reggiesanchez

whats quite a bit

to fold bigadv at 4.3ghz 1650mhz 7-7-7-20 it requires about +375 and for benching its upwards of 400 or 425

Seems quite high, are you sure your Uncore is at x16? I can run 4ghz, 1530mhz 7-7-7-24 with +0mv and be LinX stable

reggiesanchez

Thats next on my list im kind of obsessed with building a chiller I can be proud of first my first one is ok but dosent get me where i need to be. You guys are going to pax I finally read that article today I wonder if I can get off work Im right around the corner , kinda

What card is that is that a new lightning

Its the MSI 5770 HAWK

johnksss

voklskier4452

reggiesanchez

Im just going to guess your having heat issues at 1.611 vcore. Thats right around where I am and I have to try pretty hard to keep my chip cool. I cant bench unless I am running chilled water through my rig. If your trying to do some benching you might want to pull it back I have trouble when ever I idle over 30 at those speeds. With 1.6 vcore the swing is CRAZY youll go from 40 to 90 in a matter of seconds.


Oh yea and if vtt is the same as uncore I keep mine just under 1.5

You need one of these
 

Provided the block man doesnt steal my dewar at pax i should be ready for some ln2 runs that week

do you have all this stuff just for looks??
i see you with some pretty nice high end stuff and ideas, but i cant seem to find you with any high over clocks or scores or do you have a different name or something?

Most of its new, He has to wait another week or so for his P55 classy to get back from step up before he can touch any of it though

Also, he benches for 411


@aj

If your ever on the other side of the Cascades, you can use my DICE pot

johnksss

voklskier4452

reggiesanchez

Im just going to guess your having heat issues at 1.611 vcore. Thats right around where I am and I have to try pretty hard to keep my chip cool. I cant bench unless I am running chilled water through my rig. If your trying to do some benching you might want to pull it back I have trouble when ever I idle over 30 at those speeds. With 1.6 vcore the swing is CRAZY youll go from 40 to 90 in a matter of seconds.


Oh yea and if vtt is the same as uncore I keep mine just under 1.5

You need one of these


Provided the block man doesnt steal my dewar at pax i should be ready for some ln2 runs that week

do you have all this stuff just for looks??
i see you with some pretty nice high end stuff and ideas, but i cant seem to find you with any high over clocks or scores or do you have a different name or something?

Havent had a chance to run any of that stuff yet..  Just waiting on a board to come back from EVGA 

johnksss

+425 in the bios or in windows
windows 1.200 + 225
bios + 425

+425 in bios and yes rudster the uncore is at x16

voklskier4452

johnksss

voklskier4452

reggiesanchez

Im just going to guess your having heat issues at 1.611 vcore. Thats right around where I am and I have to try pretty hard to keep my chip cool. I cant bench unless I am running chilled water through my rig. If your trying to do some benching you might want to pull it back I have trouble when ever I idle over 30 at those speeds. With 1.6 vcore the swing is CRAZY youll go from 40 to 90 in a matter of seconds.


Oh yea and if vtt is the same as uncore I keep mine just under 1.5

You need one of these


Provided the block man doesnt steal my dewar at pax i should be ready for some ln2 runs that week

do you have all this stuff just for looks??
i see you with some pretty nice high end stuff and ideas, but i cant seem to find you with any high over clocks or scores or do you have a different name or something?

Havent had a chance to run any of that stuff yet..  Just waiting on a board to come back from EVGA 

aaaaah, okay...cause i have been waiting to see your numbers for a while now. wanted to see your design's in action..

ajr23

johnksss

+425 in the bios or in windows
windows 1.200 + 225
bios + 425

+425 in bios and yes rudster the uncore is at x16

 


ok...so im not crazy when i was running a +425 in the bios. nice to know..although i have since back it down to the +325 range.

I would have liked to try my designs out, but copper is insane.  It would have cost me as much just for stock as i paid for the F1 kit

johnksss im able to run my memory at +300 when not folding and still have stability in 50 passes of linx but folding and the higher clock speed when benching just seems to need a larger increase in vtt than it should.

Wow, you guys really need to pump the VTT through your chips. I did 245 Bclk at +500mv IIRC, I was only on an x17 multi though.


Hmmm......Maybe I wont wait for the weekend to do DICE

voklskier4452

I would have liked to try my designs out, but copper is insane.  It would have cost me as much just for stock as i paid for the F1 kit

i hear ya there.

ajr23

johnksss im able to run my memory at +300 when not folding and still have stability in 50 passes of linx but folding and the higher clock speed when benching just seems to need a larger increase in vtt than it should.

that's what i was finding out as well.

Rudster816

Wow, you guys really need to pump the VTT through your chips. I did 245 Bclk at +500mv IIRC, I was only on an x17 multi though.


Hmmm......Maybe I wont wait for the weekend to do DICE

i was running the 21 multi and ram at like 1800 to 2000 mhz, but im starting to get the hang of these 3900 cpus. my 3800 took no where near as much to run.

Maybe the VTT requirements are higher for higher end RAM chips? I got really cheap OCZ Platinum, thats the only differnce that I can see between our setups. Either that or my IMC just rocks 

 I finally found my last GTZ block spring...............it was literally an inch away from my computer................ Gonna play with Vantage now with some better CPU clocks

lol Rudster... When I run 4.06Ghz my VTT takes about +400. Higher gets insane though. But I hate my chip. I dunno how to get higher, I can hit 217 blck without changing anything but VTT, Vcore and RAM settings... But anything higher and it hard locks. I think it could get damn near 5Ghz on a Classified and DICE.