cranium r

here is my a temp at doing a slush bucket. works pretty good

Rudster816

cranium r

here is my a temp at doing a slush bucket. works pretty good

DUDE?! Are you nuts??? Where is your insulation???? Your going to fry that board!!!

Halo_003

Rudster816

cranium r

here is my a temp at doing a slush bucket. works pretty good

DUDE?! Are you nuts??? Where is your insulation???? Your going to fry that board!!!

Looks to me like he has Art Eraser

reggiesanchez

insulation for38 degrees ????? ive ran my rig all winter with no insulation idletemps around 27 no problems

ShockTheMonky

johnksss

i found out what those jumpers do..
they turn the cpu pll down to 
1.35V from 1.8V's@ mode 2


and i can run my memory at like 2100 mhz from 1866 mhz...
but im still stuck on cpu issues....so i have long since drop memory to around 1700 mhz for the time being...

Well since I went to air and switched the jumper back I can't even hit 2000 with my memory where with the vapo I was able to hit 2400. As for the jumper switching pll to 1.45, not the case. I ran with the jumper for quite some time and cpu pll would always set at 1.8v. If I manually set it down it would still register 1.8v.