Psssst. Hey john. It's in Anahiem. WooHoo. Are you ready?

i tried to see if they we're open already....they said i had to wait till it was delivered at least once, before i could go and get it..


i told them to make sure it's sitting upright. and since the ups driver knows me...i might get to use it right out the box...



say, you did mark which side was up right????

I asked the guy at UPS store if he could do it and he said it would be useless. The sticker is on the top of the box and they always place sticker upright for reading/scanning putpose when large box like that so it will no doubt sit upright all weekend. Still once it gets to where it gets placed on delivery truck again is another story. At 42.8lbs it will get tilted so when you recieve it, leave it to sit upright for at least another 24hrs to be sure. I know it will be hard but man up dude and deal with it.

no stress.
still working with 10 degree water but my settings for cpu are sucking pretty bad. wish i never jacked up my original cpu..grrrrrrrrrrrrr!


what was the cpu hold temp when you benched vantage? not the one on the box, but in windows.

Which mobo will you be usin with? If Classy then use jumper for Extreme Cooling rather than bios. Also if you have 2000 mem them you'll find it will clock much higher with vapo in use than with converntional cooling.

i found out what those jumpers do..
they turn the cpu pll down to 
1.35V from 1.8V's@ mode 2


and i can run my memory at like 2100 mhz from 1866 mhz...
but im still stuck on cpu issues....so i have long since drop memory to around 1700 mhz for the time being...

Rudster816

Halo_003

Rudster816

Ive been playing with the idea of buying that Koolance pot soon as one of my GTX 275's and keeping the other one.

Otherwise I would borrow a pot for doing my first DICE run and see what kind of money im ready to drop on a pot.

I don't know anybody who has a pot...

I think Nate will take offense to that

I mean anyone that I know in person.

johnksss

i found out what those jumpers do..
they turn the cpu pll down to 
1.35V from 1.8V's@ mode 2


and i can run my memory at like 2100 mhz from 1866 mhz...
but im still stuck on cpu issues....so i have long since drop memory to around 1700 mhz for the time being...

Well since I went to air and switched the jumper back I can't even hit 2000 with my memory where with the vapo I was able to hit 2400. As for the jumper switching pll to 1.45, not the case. I ran with the jumper for quite some time and cpu pll would always set at 1.8v. If I manually set it down it would still register 1.8v.

here is my a temp at doing a slush bucket. works pretty good

cranium r

here is my a temp at doing a slush bucket. works pretty good

LMAO....Nice!!