2009/11/21 14:07:04
nateman_doo
still no words on the 300's yet?  I would wait until they come out before diving in to ATI.

my daughter and I were watching vantage runs... she likes to watch the colors
2009/11/21 14:08:53
Halo_003
johnksss

way too high!! on the cpu vtt that is. try something like +225 to get into windows..then up it from there.
just ask overclocker when you see him...

up your voltage to 1.59 with vdroop on
then try...run something like prime 95 for about 10 seconds with your eleet set to the monitor window so you can see just how much volts you really are using. then you can lower to just above it and play around there.


Tried to boot at 1.59 w/ vdroop at 226 QPI, Same problem. Hangs on the post code F3-F7-F8. (On laptop too now.)
2009/11/21 14:12:41
johnksss
at 226 qpi????? what happen to booting 218??????

nate
i can always buy and try...:)
2009/11/21 14:14:20
Halo_003
Well you said 225+.

Trying 215 now. GOnna up it @ windows.
2009/11/21 14:16:45
johnksss
Halo_003

Well you said 225+.

Trying 215 now. GOnna up it @ windows.


way too high!! on the cpu vtt that is. try something like +225 to get into windows..then up it from there.


2009/11/21 14:17:29
Halo_003
+400 VTT, 1.59 Vcore, 215 QPI, vdroop enabled.

Hung at F3.
 
Edit: Roger, trying 225 VTT.
2009/11/21 14:21:11
johnksss
roger that
2009/11/21 14:23:57
Halo_003
215 QPI, Vdroop enabled, 1.59vcore, +225 VTT

Hung at F3-F7-F8. It just cycles through those.
2009/11/21 14:26:11
johnksss
try with vdroop off this time.
2009/11/21 14:27:26
johnksss
1.59 Vcore
215 qpi
1.65 Vdimm
cpu vtt +225 to +275

everything else is left to auto.

Use My Existing Forum Account

Use My Social Media Account