hwbot has sucked me in

I'll mess around with the clocks next week, i want to hit at least 30k with this setup.  seems like a realistic goal to me

all right gurus I need a little help getting stable over 4.4 I beleave that my uncore speed is the problem I cannot unlink it to the fsb/qpi every time I get around 215 blk my uncore goes over 8k and cannot get a run in temps are a little high but never go over 82. Every once in a while I will try to run just the vantage cpu tests and pass them but when its time for a whole run I crash as soon as I hit the cpu test???

are you @ 2:8, or 2:10.  if your at 2:10 you have no choice but to go to 20 uncore.  2:8 try 16X.  or try more dimm voltage.  I run about 1.75 on occasion. 

What kind of cooling you got on that cpu reggie?

nateman_doo

are you @ 2:8, or 2:10.  if your at 2:10 you have no choice but to go to 20 uncore.  2:8 try 16X.  or try more dimm voltage.  I run about 1.75 on occasion. 

cool Ill try that but might wait untill I get my chipset blocks installed for that afraid to shut my pc off right now Im raging some 06 runs just made the first page for single 280. Not much compared to you guys but addicting all the same.

@q om on water nothing special I can bench at 1.5 core pretty safely never go over 83 degrees but thats only in cpu tests. I have passed at 1.55vcore but things get a little to high for my likeing I think I hit 93 one run and decided not to to that again. LOL but as you know its nice and cold around here Im in OH so ambient temps are really helping.

Nate im not sure that I understand do you are those ratios for mem/uncore or fsb/mem , sorry for dumb question just dont really understand what steps to take to make me stable at 8k plus uncore. fsb/dram is 2/8

He means uncore at 16x (1st page of frequency bios) and mem uncore divider 2:8 (on the memory bios page)

daddy is getting it colder tonight...

Got the bong hooked up for the chipsets, and the chiller running the vids/cpu. 

AND i got BOTH windows open.  All my temps should plummet. 

not to say its not there but im on a different board im using the asus p6t deluxe v2 not the classy

Whoops, sorry reggie.  I know, the terminology is very different, and is expressed in different units.  I have to get out my notes switching between the 780i & P5E.  This may help.  The settings below are not right as to the values, Im just trying to show you where the uncore might be in the asus mobo.

AI Tweaker Menu
----------------------
Ai Overclock Tuner => Manual
Intel Speed Step Tech => Disabled
Intel Turbo Tech => Disabled
CPU Ratio => Auto
BCLK Freq => 186
PCIE Freq => 100
DRAM Freq => DDR3-1491MHz
UCLK Freq => Auto -This is probably the Uncore frequency (16x on our boards)  Since BCLK is the cpu freq, I can only deduce that UCLK is the "U"ncore blck, or frequency.  Play with this to see the options it gives you.  This might or might not change the setting just above (DRAM Freq) automatically.  You;ll just have to test it.
QPI Link Data Rate => Auto

Voltages
-----------
CPU Voltage => 1.35
CPU PLL Voltage => 1.96
QPI/DRAM Core Voltage => 1.35 - I know this is uncore voltage
DRAM Bus Voltage => 1.64
CPU Differential Amplitude => 800mV