ladies... and gentlemen... we have a heartbeat....

dang...i suck....
i got 2 of the 4 at 9.9.9.27 1.68V

johnksss

dang...i suck....
i got 2 of the 4 at 9.9.9.27 1.68V

You'll find if you raise your qpi you can lower your L1,L2,and L3 Latencies by increasing your cpu speed. That will also pick up the bandwidth.

tis is true....but i have been having a go at keeping my cpu above 4.7 ghz..975 or 920.
and that's what i was testing for when i jumped in to test the ram....ill get back to that when i have some more time to really get into it. im just surprised that this ram is better than my 2k blade.

ShockTheMonky

Halo_003

You and your sick Super Talent RAM...

SIC but you love it. You envy my mem. You lust for my mem.

I know. I'd love some of that. That stuff may even be worth picking up 3 of the Koolance RAM blocks for. Then It'd be a good excuse to have a dedicated loop for RAM and NB/SB/Vreg.

Q56_Monster

xxrabid93

I got my Classy earlier today. I hope to get it set up tomorrow...or maybe even tonight. We'll see.

You know you can't wait till tomorrow!  I usually have it un-packaged before the UPS guy leaves the driveway!

Hahahaha. Pic monster wants more.

yea what the hell rabid?? We haven't seen many pics of this new build you got going on?!

Don't worry guys. I had to go get my grandma's external hdd from her, b/c it has all my backup data on it. That's also why i didn't get to build it last night. I just got home from getting the hdd, and now the building (and taking tons of pics) will commence.

ok, i just ran into my first problem. The cpu hold down bracket is insanely loose. So much so that when i tried to clamp it down, it slipped, and the cpu bounced up and hit the socket. The socket looks fine, but i dont want that happening again.

So what do i do? Just tighten the 4 screw thing on the bracket?

xxrabid93

ok, i just ran into my first problem. The cpu hold down bracket is insanely loose. So much so that when i tried to clamp it down, it slipped, and the cpu bounced up and hit the socket. The socket looks fine, but i dont want that happening again.

So what do i do? Just tighten the 4 screw thing on the bracket?

You may try.. Mine was so hard to get down.. It was like a crunch. Took like a ton of pressure.

it is meant to be loose, but when you put the cpu in, the entire structure rises up and it is tight when you put the hasp in place