Looks Like they have Futuremark working again, But I'm not sure what they have modified/changed.

Halo_003
Is that a GPU phase unit? Or a CPU one? I've always though it would be sweet to have both a CPU phase and a GPU one.

Mine is a dedicated cpu unit, but I am curious if it would mate up to the gpu, or if the collar is too wide to match the mounting holes.

Scarlet-Tech

Halo_003
Is that a GPU phase unit? Or a CPU one? I've always thought it would be sweet to have both a CPU phase and a GPU one.

Mine is a dedicated cpu unit, but I am curious if it would mate up to the gpu, or if the collar is too wide to match the mounting holes.

You could probably get mounting hardware and/or a collar made for it for relatively little cost, might be worth looking into. It sure would make GPU benching easier.

Does anybody "just" run a water chiller in their loop ?
 
We used one at work for a vacuum pump trap, that puppy would chill subzero
 
Kind of like what you guys put directly on the chip  - used to cool the coolant / anti-freeze

Cool GTX
Does anybody "just" run a water chiller in their loop ?
 
We used one at work for a vacuum pump trap, that puppy would chill subzero
 
Kind of like what you guys put directly on the chip  - used to cool the coolant / anti-freeze

Biggest Problem with going sub-zero with water cooling is Condensation on Lines/Blocks. That is why on my Chiller I'm able to set the temp just above the point that Condensation begins. 

And the Problems Continue.........
 
Got my Two new EVGA GTX 980 Ti Classifieds Today and I put them in my RVE with the Other Two New Classys I bought on Ebay and ONE of the Cards I bought from EVGA was Baaaad!
 
BUT, I Talked to the Techs and They're Cross-Shipping another One to me tomorrow and then I'll Ship the other one back.
 
 

While I'm waiting for  the other replacement Classy, Ran a quick Time Spy Bench in 3-way SLI with the Classys at Stock settings and CPU at 4835MHz and SHOULD put me to #13 Position in HOF (Once it gets updated on Futuremark).
 
That's really not too bad a start for some "Old" Maxwell Graphics Cards.
 
But Alas, even though these Maxwells OC/Bench pretty good, Maybe I MIGHT "get the urge" to change my
mind and go back to take another look at other possibilities.........(Heh,Heh)
 
  

Cool GTX
Does anybody "just" run a water chiller in their loop ?
 
We used one at work for a vacuum pump trap, that puppy would chill subzero
 
Kind of like what you guys put directly on the chip  - used to cool the coolant / anti-freeze

I'm using a sub-zero chiller for my benching system atm, I made it out of an old 5000BTU R22 window ac unit. Coolant gets down to about -17C.


 
My 780 Ti idled at -9C and went up to 12C under load, the amount of condensation pouring off of it was ridiculous.

Nice!
Like I stated, running sub-zero with water cooling, Condensation is EVERYWHERE!, lol

Remember those Titan X Pascal's I thought I Canceled?
 
Well, It appears those little devils at Nvidia sent them to me anyway!
 
Now, I wonder what I should do with them.....................................