2016/11/21 15:56:39
sputnik7913
 I have purchased an EK D5 PWM pump and connected it to CPU fan 4-pin connector on the board... When I set maximum pump speed (100%) in bios, it only runs at 3400rpm, as opposed to 4800rpm of pumps maximum speed... Any ideas folks?
2016/11/21 16:08:18
GTXJackBauer
AFAIK, the original PWM D5s aren't following the intel standard but their G2 (Generation2) do.  I believe if this is the case, your pump is only running at 60%.  You could look for something called the "Diva Mod" from OCN forums.
2016/11/21 16:14:50
sputnik7913
GTXJackBauer
AFAIK, the original PWM D5s aren't following the intel standard but their G2 (Generation2) do.  I believe if this is the case, your pump is only running at 60%.  You could look for something called the "Diva Mod" from OCN forums.


OMG..... i'm a big fan of modding, but this is way out of my field ... You have any links to that G2 pump? I can't find it...
2016/11/21 20:46:30
LazySoft
Try another PWN fan header than CPU. It seems that will be better. or try to make a Diva fix.


2016/11/22 02:13:46
GTXJackBauer
sputnik7913
You have any links to that G2 pump? I can't find it...




Sure

Use My Existing Forum Account

Use My Social Media Account