IchigoSoulReaper

Shen_Miao
It seems like that your new card isnt under full load. So it has a lower temperature thus has a higher clock.(personal view) . Have you tried reinstall the software and the driver?(hope this will work)(sorry for my poor English)

3D mark's details say GPU was under 100% load during the graphics tests. Yeah I tried a clean install with the latest 4 nvidia drivers but the results were always the same. No idea why it's scoring so low.

Keidj
Just for reference here's my score with pretty much the same system specs as the OP. 1080 Classified at stock + 6700K @4.5Ghz.
 

Yeah that's how my last card was performing :/

Well…have you set the power limit lower than the last card? The temperature shouldn't be that low…

arestavo
Try with a lower VRAM OC. These 10 series cards appear to have an aggressive ECC and pushing the memory OC too far can negatively impact FPS (and benchmark scores).
 
Also know that certain windows updates can, and have in the past, reduced overall PC performance.

Hmmm good idea. OK I'll mess around with the VRAM OC later when I have some time and I'll post back. 

Shen_Miao

IchigoSoulReaper

Shen_Miao
It seems like that your new card isnt under full load. So it has a lower temperature thus has a higher clock.(personal view) . Have you tried reinstall the software and the driver?(hope this will work)(sorry for my poor English)

3D mark's details say GPU was under 100% load during the graphics tests. Yeah I tried a clean install with the latest 4 nvidia drivers but the results were always the same. No idea why it's scoring so low.

Keidj
Just for reference here's my score with pretty much the same system specs as the OP. 1080 Classified at stock + 6700K @4.5Ghz.
 
 

Yeah that's how my last card was performing :/

Well…have you set the power limit lower than the last card? The temperature shouldn't be that low…

Yeah the power limit is currently at 130 C because the GPU is in slave mode. I also tried master mode at 120 C but the results were not better. I agree that the temps are lower than normal so it makes me think the card is not doing something it should be doing. 

http://www.3dmark.com/fs/10794175 that's my last FSU bench, so i can't really see what you griping about lol ;)
 
try putting Phsyx to CPU might get you that extra points you seem to crave :D
 
 
i love sunday mornings

Looks like drivers. You should run 373.06 to make it a fair comparison. 

arestavo
Try with a lower VRAM OC. These 10 series cards appear to have an aggressive ECC and pushing the memory OC too far can negatively impact FPS (and benchmark scores).
 
Also know that certain windows updates can, and have in the past, reduced overall PC performance.

OK I just tried a lower VRAM OC and NO VRAM OC but it didn't help. 

baconinabun
http://www.3dmark.com/fs/10794175 that's my last FSU bench, so i can't really see what you griping about lol ;)
 
try putting Phsyx to CPU might get you that extra points you seem to crave :D
 
 
i love sunday mornings

Well switching Physx didn't help anything either.  I even tried switching the slot the GPU was in. Nothing.
 
Last card just somehow performed about 10-12% better with lower clocks and higher temps  
 
Does anybody else have the Windows 10 anniversary update? What are your benchmarks looking like?