ilyama
And please, EVGA... make comment all the pictures that we see on internet...
 
What are we suppose to think about that ? This is ridiculous...
 

They will not answer to you, Employees are not allowed to comment on the subject (just escalate), they are in the full damage control phase right now, they try to mitigate the cost by trying to dumped the labor load cost on the customer, "Pads"..."Bios" . 
 
Only the Press service will be allow to comment on the subject right now. Which will not happen before at least 100 of them blow (i give it 2 weeks) and make the Internet News again. Then it'll be panic mode...

Micron fix is still present. Seems like 200-250RPMs added.

DeathAngel74
Micron fix is still present. Seems like 200-250RPMs added.

I think it's more, 1600rpm to 2200, not silent anymore.

Hi, i have a GTX 1070 08G P4 6274 KR , and i wondering if you have some kind of support or forums for this issue in spanish? I live in Mexico and as you may know my english is not very good. 
I dont wan to burn my GPU :)
Thx

Thanks for update the bios!!  But what about international owners??? I from Argentina.  
I would receive the thermal pads, but on the web reports not sent to Argentina.

So you updated the GTX 1080 FTW's primary bios, am I right to assume that is the Master mode?

I think the link for the 1070 FTW is wrong. The link says it is for bios version 86.04.3b.00.82, but the update utility says it is version 86.04.50.00.72, which is the older version. Am I misunderstanding something?

Will the Bios update affect any custom fan curves you set using software such as Precision or Afterburner? Meaning, you should still be able to manually lower the fans if you find the new default curve to be a tad too noisy, correct?

This is a new update look again at the numbers.

Oberon_V
Will the Bios update affect any custom fan curves you set using software such a precision/afterburner? Meaning, you should still be able to manually lower the fans if you so desire, correct?

Yes... that's why for me this bios is not necessary, I prefer to do my own fan curve...

But nobody is able to give me a screenshot of the new bios curve, I'm just curious to see that