Can anyone upload the original BIOS 08G-P4-6171-KR? The new one is to noisy for me in the end.
 
Thanks in advance.
 
 

Hanson
Can anyone upload the original BIOS 08G-P4-6171-KR? The new one is to noisy for me in the end.
 
Thanks in advance.
 
 

Just re-update your PRIMARY BIOS and you get the 0rpm (up to 55 degrees) again. I did, and my card is dead silent. I did have the same issue with noise, and I figured out why. I did install Primary AND Secondary update. It gave me a noisy card. Re-updated Primary, and everything is fine. Remember to check if you have set the bios to Primary on the card.....very important!

Thanks for your help. But my card is a GTX 1070 ACX 3.0 , with only one BIOS.

I have updated my GTX 1080 SC (08G-P4-6183) BIOS to 84.04.3B.00.82. Now, when GPU under load, the fan RPM spikes to 3000+ every few seconds. Is this normal?
 
Is there a way to set thresholds and configure the fan speed profile on my own?

Tried to update my gtx 1080 ftw bios but it failed. When I pressed "y" to start the update nothing happened. Device manager says that the card is disabled.
 

CoriolisAffectment
 
Hang tough!  Things are on the move!

In case anyone else wants this avatar  :) 
imgurDOTcom   /a/m3VxL
 

I don't want to read through all 56 pages of this thread, so here is my problem:
I just installed the update for my 1060 SC (i double-checked that it was the right one, i have a  06G-P4-6163-KR) and now i get a black screen after the windows 10 loading screen, right where the login screen should be. Can you guys help me?

Greutel
here is my problem - I don't want to read through all 56 pages of this thread...
 

ilyama
Cant wait to see the next episode GFAFS 

Me too
 

 

Transmitthis

Greutel
here is my problem - I don't want to read through all 56 pages of this thread...
 

wow, that was helpful..
It would be a completely different story if i would be able to find the "search thread" option.