6700k
Gigabyte ud3 z170
16gb corsair 3200
intel 750 pcix
evga 1080ftw
 
Have an issue when playing Doom and Titanfall 2. The screen shows an "interference" or similar, with tiny white points in all the screen.
 
Gallery:
 
 https: // postimg.org / gallery / 37nael75w /

I follow the Basic Troubleshooting, the issue continues

This is the 900 series forum, not the 10 series.
 
However, if you followed the troubleshooting guide and setting debug mode, underclocking, clean installing drivers using DDU, and clean booting doesn't fix the problem then it is time to start an RMA. Unless you can test the card in another system to confirm that the card is at fault - if not, start that RMA.

 
Moving to the 10 Series section.

tks guys, today i testing the card in other pc
 
What do you have your global power management mode set to inside the nvidia control panel? 
"Maximun Perfomance"

solved, changing configuration

madonnawgacy
solved, changing configuration

Could you tell us exactly what fixed the problem? Thanks.

in configuration of Doom changing "Grano de película" to "0.0" (i dont know the exact traslation - "movie grain" ?)
 
in Titanfall2 the opcion is not available in the configuration, maybe a .txt or .cfg with advanced configuration solved the issue, i searching the web for that

i found in Documents > Respawn > Titanfall2 > Local > videoconfig.txt : but i dont know was "grano de película" to set on 0.0
 
 
"VideoConfig"
{
"setting.cl_fovScale" "1.3"
"setting.cl_gib_allow" "1"
"setting.cl_particle_fallback_base" "0"
"setting.cl_particle_fallback_multiplier" "1"
"setting.cl_ragdoll_maxcount" "8"
"setting.cl_ragdoll_self_collision" "1"
"setting.mat_depthfeather_enable" "1"
"setting.mat_forceaniso" "16"
"setting.mat_mip_linear" "1"
"setting.stream_memory" "6000000"
"setting.mat_picmip" "0"
"setting.particle_cpu_level" "2"
"setting.r_createmodeldecals" "1"
"setting.r_decals" "256"
"setting.r_lod_switch_scale" "1"
"setting.shadow_enable" "1"
"setting.shadow_depthres" "1024"
"setting.shadow_maxdynamic" "4"
"setting.r_hbaoenabled" "1"
"setting.modeldecals_forceAllowed" "1"
"setting.dvs_enable" "0"
"setting.dvs_gpuframetime_min" "15834"
"setting.dvs_gpuframetime_max" "16333"
"setting.defaultres" "1920"
"setting.defaultresheight" "1200"
"setting.fullscreen" "1"
"setting.nowindowborder" "0"
"setting.mat_vsync_mode" "0"
"setting.mat_backbuffer_count" "1"
"setting.mat_antialias_mode" "3"
"setting.csm_enabled" "1"
"setting.csm_quality_level" "1"
"setting.csm_cascade_res" "2048"
"setting.gamma" "1.657534"
"setting.configversion" "7"
}

Thanks for letting us know the solution.