2016/10/26 15:05:33
jm_loli
Hello everyone. I recently bought the GTX 1070 Founders Edition, and I realized that the use of GPU is around 70-75%. In most games that I have tested. CPU temperatures hover around 65 ° C, and GPU are around 70 ° C. My specs are:
 
Intel Core i7 6700 (non K)
EVGA GTX 1070 Founders Edition
16gb (2x8) Kyngston HyperX Fury.
EVGA Supernova 850 B2
Tb 2x3 WD Caviar Green
 
I hope you can help me, thanks.
2016/10/26 15:07:03
Sajin
Are you playing at 1080p?
2016/10/26 15:15:11
jm_loli
Sajin
Are you playing at 1080p?


For now yes. But these days I think buy another monitor to play at higher resolution.
2016/10/26 15:17:10
Sajin
Is the low use giving you bad fps?
2016/10/26 15:21:57
jm_loli
Sajin
Is the low use giving you bad fps?




In some games yes. For example Rise of the Tomb Rider, there are times when the FPS down to 45 while the GPU load does not even reach 80%. :(
2016/10/26 17:29:59
Sajin
jm_loli
Sajin
Is the low use giving you bad fps?




In some games yes. For example Rise of the Tomb Rider, there are times when the FPS down to 45 while the GPU load does not even reach 80%. :(


You could try increasing your resolution using dsr to see if it helps your situation.
2016/10/26 17:34:12
bissagars
or can you force the GPU to always run at full speed, kboost option if I remember
2016/10/27 05:07:13
jm_loli
bissagars
or can you force the GPU to always run at full speed, kboost option if I remember


I already tried with kboost activated, but the results are the same.
2016/10/27 05:10:08
jm_loli
Sajin
jm_loli
Sajin
Is the low use giving you bad fps?




In some games yes. For example Rise of the Tomb Rider, there are times when the FPS down to 45 while the GPU load does not even reach 80%. :(


You could try increasing your resolution using dsr to see if it helps your situation.




I increased the resolution by DSR, increased use of GPU but not much and FPS remain low. I do not know what else to do. Will is a problem with the graphics card?
2016/10/27 05:16:49
Scarlet-Tech
Post a screen shot of GPU-Z sensor tab with the card under load, at idle, and also post a screen shot of the GPU-Z main screen. Make sure your pci lanes are not running x1 or lower than x8 or x16 pci 3.0

Use My Existing Forum Account

Use My Social Media Account