kerryd
Update think I mite have it this time will know after it finishes a set of wu's . I found a post with this  .
 
<slot id='1' type='GPU'>
  <client-type v='advanced'/>
  <cuda-index v='0'/>
  <gpu-index v='2'/>
  <opencl-index v='0'/>
</slot>
<slot id='2' type='GPU'>
  <client-type v='advanced'/>
  <cuda-index v='1'/>
  <gpu-index v='1'/>
  <opencl-index v='1'/>
</slot>
<slot id='3' type='GPU'>

Thanks for Posting this, I may need this on my T630 Rig
 

bcavnaugh

kerryd
Update think I mite have it this time will know after it finishes a set of wu's . I found a post with this  .
 
<slot id='1' type='GPU'>
<client-type v='advanced'/>
<cuda-index v='0'/>
<gpu-index v='2'/>
<opencl-index v='0'/>
</slot>
<slot id='2' type='GPU'>
<client-type v='advanced'/>
<cuda-index v='1'/>
<gpu-index v='1'/>
<opencl-index v='1'/>
</slot>
<slot id='3' type='GPU'>

Thanks for Posting this, I may need this on my T630 Rig
 

Here is a link to the post its at bottom of the page
https://foldingforum.org/...c.php?f=74&t=28275

I have 2 1070 SLI having some of the same issues. I'm pretty sure its a driver update issue, will there be a fix or will I have to convert back to the old driver in the mean time?

soullesshunter
I have 2 1070 SLI having some of the same issues. I'm pretty sure its a driver update issue, will there be a fix or will I have to convert back to the old driver in the mean time?

What Driver are you running? The last know good driver for Folding is 373.06.
The last TWO Drivers (375.63 & 375.57) are causing all Folding Task on the GPU to Fail.
375.57 was Pulled from NVIDIA's Website.

My current update driver is at 375.63 release date was 10/22/2016.

soullesshunter
My current update driver is at 375.63 release date was 10/22/2016.

You should go back to Driver 373.06 even the new driver that came out today has Folding Issues Noted.
Nvidia GeForce 375.70 WHQL Drivers Released Are Not Ready For Folding...
 Work units reporting wrong values in Folding@Home - Under investigation
 

shouldn't be a issue switching back i'll, wanted to get ready for time for the time zone challenge event.

Update I had it fixed then it switched back to being messed up . So I fixed it by putting 980ti in TV computer or should say cruncher . But pulled the 470's out of it first . Down clocked the 980ti to what it should be 1300 MHz it was running at 1400 MHz it was failing a few wu's . 1400 MHz is a pretty good clock for not over clocking it

Got working I'll have to wait for some events before I update nothing too bad. thanks for the help guys