Does the secondary BIOS comes with an more aggressive build in fan curve? It's the first time I enabled the slave BIOS and fans won't go under a 1000 RPM in idle, even though I put my fan curve in EVGA precision oc x to go to 0 under 50 °C.

EVGA GeForce GTX 1070 SC ACX 3.0
and i make bois
But something does not happen .. any help ?

DeathAngel74
If you are using windows 7:
Set max performance in NVCP on global tab, add windows\explorer.exe, windows\system32\dwm.exe in NVCP on programs tab(max performance), you can turn kboost off and reboot.
If you are using windows 10: do the 2 steps above, plus this one below and reboot.
windows\systemapps\shellexperiencehost_cw5n1h2txyewy\shellexperiencehost.exe to NVCP on program tab(max performance).
It's the same as KBoost, but you're using Windows to idle at base clock and .762mv.

didn't work

Weird...Working here

 

DeathAngel74
Weird...Working here

idk. i can do +150 core +500 mem stable but only with kboost on. things start crashing once i turn kboost off. prior to the bios update i could only do +350 mem so yes there's been an improvement but i expected more from this update.
 
i have the ftw and updated my slave bios if that makes any difference
 

Hello all,
 
How do I update the BIOS for dual-BIOS cards in SLI ? (2 x GTX 1070 FTW)

I think you'll have to flash the cards individually. Update the primary bios of the top card, reboot. Turn pc off, flip the bios switch to slave. Boot PC. Flash secondary bios, reboot. Shutdown again. Put the bottom card in the top slot, repeat.
 
Dual BIOS Cards - Card must be set to BIOS that is being flashed (86.04.50.00.70/86.04.50.01.70):

• 08G-P4-6274-KR - EVGA GeForce GTX 1070 FTW DT ACX 3.0 - Primary BIOS | Secondary BIOS
• 08G-P4-6276-KR - EVGA GeForce GTX 1070 FTW ACX 3.0 - Primary BIOS | Secondary BIOS
• 08G-P4-6278-KR - EVGA GeForce GTX 1070 FTW HYBRID - Primary BIOS | Secondary BIOS

Hmm, not fun. I guess I will wait with this update. I was hoping to have an automated way using PrecisionX or something.