PC Forever
I just built an X99 FTW K with a 5820K processor on Friday (and it's great so far) :)
I'm on bios 2.0 and everything seems stable.
Should I update the bios or leave it as is, if there are no issues with the current bios?

I would recommend you do update to the current Bios as you have a fresh OS Install and All.

Has anyone gotten memory faster than 3200mhz to work on x99 CPUs  I didn't think any of them would boot/be stable with super fast memory.
 

So I installed this update, and lost my second graphics card.  Restored to 2.01 to get it back.  Any idea why this would happen?

eckertt001
So I installed this update, and lost my second graphics card.  Restored to 2.01 to get it back.  Any idea why this would happen?

Did you reset the Bios back to the Default Settings Before you update to the New Bios. THIS IS A MUST
From Post 1) First go into your BIOS and load defaults, save and exit
You can also Power on your Computer and Hold the Small Red Button on the MB or the Back I/O Panel and hold for 6 seconds.
You will then need to re-setup the new Bios.

Will the G.SKILL TridentZ Series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Intel X99 Platform Desktop Memory Model F4-3200C14Q-32GTZSW work on the x99 classified mother board with the new bios update ?

reforger9
Will the G.SKILL TridentZ Series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Intel X99 Platform Desktop Memory Model F4-3200C14Q-32GTZSW work on the x99 classified mother board with the new bios update ?

Does GSkill list them as tested / approved ?

Cool GTX

reforger9
Will the G.SKILL TridentZ Series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Intel X99 Platform Desktop Memory Model F4-3200C14Q-32GTZSW work on the x99 classified mother board with the new bios update ?

Does GSkill list them as tested / approved ?

No they do not: http://gskill.com/en/configurator

It show for the x99 ftw , it's a brand new bios maybe they haven't listed it yet. Wondering if anyone has new bios and tried them with the classified

bcavnaugh

eckertt001
So I installed this update, and lost my second graphics card.  Restored to 2.01 to get it back.  Any idea why this would happen?

Did you reset the Bios back to the Default Settings Before you update to the New Bios. THIS IS A MUST
From Post 1) First go into your BIOS and load defaults, save and exit
You can also Power on your Computer and Hold the Small Red Button on the MB or the Back I/O Panel and hold for 6 seconds.
You will then need to re-setup the new Bios.

Appreciate the response, however this did not work.  I tried twice, once using the Load Defaults option, and another using the Reset CMOS button.  Almost same result, except this time I had to re-seat the graphics cards to get both to activate on v2.01.  On v2.02 re-seating the cards did not produce any change.
 
Just to verify, each card works on v2.02, individually and using either slot.  But they will not both show at the same time.
 
Thank you.

eckertt001

bcavnaugh

eckertt001
So I installed this update, and lost my second graphics card.  Restored to 2.01 to get it back.  Any idea why this would happen?

Did you reset the Bios back to the Default Settings Before you update to the New Bios. THIS IS A MUST
From Post 1) First go into your BIOS and load defaults, save and exit
You can also Power on your Computer and Hold the Small Red Button on the MB or the Back I/O Panel and hold for 6 seconds.
You will then need to re-setup the new Bios.

Appreciate the response, however this did not work.  I tried twice, once using the Load Defaults option, and another using the Reset CMOS button.  Almost same result, except this time I had to re-seat the graphics cards to get both to activate on v2.01.  On v2.02 re-seating the cards did not produce any change.
 
Just to verify, each card works on v2.02, individually and using either slot.  But they will not both show at the same time.
 
Thank you.

Sound more like you may gave a settings set wrong in the Bios to cause what you are seeing.
Maybe you should open a New Thread about this and complete the template file located here: X99 Troubleshooting TEMPLATE  **READ ME BEFORE POSTING**  Remember to also post the template on your Thread.