Using evga precision ox
Mine have Micron memory, at +300 it shows terrible artifacts, but works fine at +200 - i see no reason to try and find that sweet spot between +200 and +300 since it will make no noticable difference.. To be honest i was expecting to get samsung memory, but lots of "premium" models are coming with micron that barely holds itself.
Core on the other hand, works +130, getting 2125-2134 with boost.. Gotta test it some more before i claim these clocks perfectly stable, but anything above that just crashes.
I've managed to play few Battlefield 1 rounds, ultra settings, 1440p, around 100fps with no crashes.
What i find strange - power limit doesn't seem to do a thing, it keeps at 90% tops.
upd: been playing games all evening, it just sits at 2139 1.094v.. throttles to 2126 if temperature rises above 71 or so. I've set up the fan curve so fans are spinning to 60% if temp reaches 60c, i can barely hear it anyway and it helps to keep that 2139 stable with no throttles.
I am not using K-boost, but the only downside i have - card cant enter idle-mode by itself, after playing a game i must restart my PC and not start precision tool in order to make it use idle clocks.

FTW's TDP is so high, that power% never comes close to making the card throttle. This I welcome! Seems that with so much power reserve, the 10-phase buck regulator is built to last.
 
As I edited the MHz/voltage graph, to rise the voltage to 1.093V, I get ~2150MHz. Was able to run fire strike with 2190MHz, but something was wrong, as the graphics score didn't improve.

Is there any chance that micron memory idle stability issues will be adressed in the future BIOS updates?
Because, it seems to be pretty stable under load, but when you try to apply clocks at idle - you get checkerboard artifacts all over the screen, hang and reboot... There is a trend, i am not the only one who noticed that. I know it's not faulty, but i really would like to get the maximum out of FTW card %)
i've noticed thad under load it works stable if you set +530 offset. It's pretty nice..

I'd be interested to know what 1.) your boost clocks out of the box (without any oc whatsoever) and 2.) with power, temp and voltage maxed out are (but without touching the Mhz slider). For comparability I'm using the agressive fan profile.
 


You can view the pictures when you right click on them and open them in a new tab. 
 
Mine are (after 10min warm up in heaven):
1.) 1962 MHz
2.) 1974 MHz

I micron. Max clock can get in heaven only 2050 mhz.. i upgrade my psu to 850w hoping it will helps but still same. Any tips..? Clock offset +60 mem +180. More than that crash..

just got mine. out of the bat, i was able to overclocked the core to 2126mhz, 225+ offset from afterburner, the memory clock was able to give it extra 250mhz+. what you guys think, solid oc?
 
and yes I benched it with valley and heavens, it runs solid no stutter no crashes, I monitor the speed, volt, usage, and temp and all seems to run very fine at 58c. underload.
 
edit: I noticed that all of you have it at 1.09, mines is running at 1.06. is there a way to increase the volt besides customizing the bios?

My 1070 FTW has been changed due to heating, while maintaining 60 with cooler 100% other components for some reason was getting 70 75 within the acceptable, but the store made the exchange said the another VGA keps 53 with stock cooler, and temps of other components 55º 60º, both samsung memory.

What program are y'all using to do these over clocks? I'm using afterburner and bumping mine up +50hz on the core and memory. Running Prime95(small fft)(most heat) and running the Heaven benchmark maxed out, tesselation 100℅ etc. And my boost i guess is sitting at 2138 and memory at 4154, 37 c max temp.

Is this not a good over clocking software or is precision the better route?

Gpu and CPU are under water, EK blocks

Hi,
 
GTX 1070 FTW Slave bios 
 

dJbLoW
Hi,
 
GTX 1070 FTW Slave bios 
 

I doubt stay 10 minutes stable in OCCT.