• EVGA Software
  • Closed Bug Reports and Issues with EVGA Precision XOC (Pascal Architecture Only) Ver 6.0.1 (p.11)
2016/06/27 18:02:20
ander12391
This OC Scanner running by itself is kinda scary... I hope its not causing any damage by adjusting voltages too high. 
2016/06/27 19:32:48
ander12391
Ok another update. The OC scanner started again however before I could take a screen shot both my monitors starting artifacting and flashing pink and green. I had to force turn off the PC. And after restarting the PC I was prompted with a lovely warning from the ASUS bios saying my OC failed even though I do not have a Overclock on my CPU unless you account for my 2666Mhz XMP setting thats enabled. Anyhow I am going to uninstall the software for now and hope that next release fixes most of the issues. I only need this software because the Founder Edition cards throttle so bad with their default fan profile. 
2016/06/28 08:45:37
bcavnaugh
ander12391
I have also had the issue where OC scanner will open up by itself and start scanning. However what's really weird is that GPUZ and Precesion X OC will report that my core clock is over 8 ghz. So I'm not sure what's causing this but I'll try and get a screen shot.

Specs are:
Intel 5930k (stock)
16gbs of RAM
Asus Sabertooth X99
EVGA 750 G2
EVGA GTX 1080 FE ( stock)
Windows 10 Pro 64 bit

 
ander12391
I have GPUZ 0.8.9 which is the latest version. And I wish I would have taken a screen shot now... I knew 8GHZ was bug so I just exited the software and restarted it. 


ander12391
This OC Scanner running by itself is kinda scary... I hope its not causing any damage by adjusting voltages too high. 


ander12391
Ok another update. The OC scanner started again however before I could take a screen shot both my monitors starting artifacting and flashing pink and green. I had to force turn off the PC. And after restarting the PC I was prompted with a lovely warning from the ASUS bios saying my OC failed even though I do not have a Overclock on my CPU unless you account for my 2666Mhz XMP setting thats enabled. Anyhow I am going to uninstall the software for now and hope that next release fixes most of the issues. I only need this software because the Founder Edition cards throttle so bad with their default fan profile. 



You should edit your first post no need to create a new post for a comment or an addition
2016/06/28 11:21:21
ZachPL
Version 6.0.2Release: 6/28/2016
  • Fix VF curve data incorrect when switching GPU
  • Fix invalid fan curve showing when switching GPU
  • Fix VF curve editor crash when switching GPU
  • Fix power and target voltage set incorrectly when closed
  • Change setting dialog to always be on top
  • Fix GPU voltage not showing in hardware monitor
  • Check VF curve clock offset range to avoid out of spec
  • Restore power target and voltage after OC Scan complete
  • Fix GPU clock offset not saving to profiles
  • Fix voltage going to 100% after switching profiles
  • Cancel OC scanner if click default
  • Save LED status into profile
2016/06/28 11:46:20
Sajin
bcavnaugh
 
Please Do not Post about Other Software in this Thread ie. No Posting about MSI Afterburner or NVIDIA Inspector.
 
Posting that this software sucks or I have this issue to when are you going to get it fixed and other type comments are not helpful and is Trolling.

Recommending msi afterburner over precision x isn't trolling. Afterburner simply works better than precision x. Not telling people about msi afterburner is just forcing people to be stuck on buggy precision x versions.
2016/06/28 11:50:25
bcavnaugh
Sajin
bcavnaugh
 
Please Do not Post about Other Software in this Thread ie. No Posting about MSI Afterburner or NVIDIA Inspector.
 
Posting that this software sucks or I have this issue to when are you going to get it fixed and other type comments are not helpful and is Trolling.

Recommending msi afterburner over precision x isn't trolling. Afterburner simply works better than precision x. Not telling people about msi afterburner is just forcing people to be stuck on buggy precision x versions.


My Subject is: Bug Reports and Issues with EVGA Precision XOC
Not: Bug Reports and Issues with EVGA Precision XOC and other Software.
But then you always know what is best, don't you Sajin.
 
2016/06/28 11:51:20
bcavnaugh
Small download issues. But all seems fine

Attached Image(s)

2016/06/28 11:57:39
bcavnaugh
Issues with 6.0.1 are no longer valid now that 6.0.2 is now out and new Thread should be created for issues in 6.0.2
2016/06/28 12:00:18
Sajin
bcavnaugh
Sajin
bcavnaugh
 
Please Do not Post about Other Software in this Thread ie. No Posting about MSI Afterburner or NVIDIA Inspector.
 
Posting that this software sucks or I have this issue to when are you going to get it fixed and other type comments are not helpful and is Trolling.

Recommending msi afterburner over precision x isn't trolling. Afterburner simply works better than precision x. Not telling people about msi afterburner is just forcing people to be stuck on buggy precision x versions.


My Subject is: Bug Reports and Issues with EVGA Precision XOC
Not: Bug Reports and Issues with EVGA Precision XOC and other Software.
But then you always know what is best, don't you Sajin.
 


Nothing wrong with reporting bugs. Not telling others about other software that works better is just bs.
2016/06/28 12:10:00
bcavnaugh
Sajin
bcavnaugh
Sajin
bcavnaugh
 
Please Do not Post about Other Software in this Thread ie. No Posting about MSI Afterburner or NVIDIA Inspector.
 
Posting that this software sucks or I have this issue to when are you going to get it fixed and other type comments are not helpful and is Trolling.

Recommending msi afterburner over precision x isn't trolling. Afterburner simply works better than precision x. Not telling people about msi afterburner is just forcing people to be stuck on buggy precision x versions.


My Subject is: Bug Reports and Issues with EVGA Precision XOC
Not: Bug Reports and Issues with EVGA Precision XOC and other Software.
But then you always know what is best, don't you Sajin.
 


Nothing wrong with reporting bugs. Not telling others about other software that works better is just bs.


Fine, as you wish Sajin
Good-By.

Use My Existing Forum Account

Use My Social Media Account