bcavnaugh

Firezen42

bcavnaugh

Firezen42

bcavnaugh

Firezen42
 Does it mean that the process clearing the EVGA register files is no longer needed?
 

I cannot not say, maybe an EVGA Tech will post this info.
 
Did you remove the software and reboot and then download 6.0.1 install " As an administrator" and is it still showing as 6.0.0?
 

It is still showing as 6.0.0 when I open the software but it is correctly shown as 6.0.1 in the control panel ...
 
New issue discovered: After reinstalling the software, now the Auto OC will launch automatically and crash itself. (Not a driver crash but the software itself)
 
My V/F curve is definitely broken now
 

Got it now: * Bottom Left Corner.


It looks like you are showing OC Scanner in the first Image?

Yes, the OC Scanner launches automatically and crashes itself. After the crash of the OC Scanner, my screen starts blinking even if I have closed Precision X OC.

Did you install the EVGA OC Scanner?
If so remove all the EVGA Software and start over, install the EVGA OC Scanner software After Precision XOC

Isn't the EVGA OC Scanner for Pascal GPUs integrated in the new Precision X OC?
Do I need to separately install the older version of OC Scanner from the below link?
http://www.evga.com/ocscanner/

I thought OC Scanner was obsolete...?

bcavnaugh

Firezen42

bcavnaugh

Firezen42

bcavnaugh

Firezen42
 Does it mean that the process clearing the EVGA register files is no longer needed?
 

I cannot not say, maybe an EVGA Tech will post this info.
 
Did you remove the software and reboot and then download 6.0.1 install " As an administrator" and is it still showing as 6.0.0?
 

It is still showing as 6.0.0 when I open the software but it is correctly shown as 6.0.1 in the control panel ...
 
New issue discovered: After reinstalling the software, now the Auto OC will launch automatically and crash itself. (Not a driver crash but the software itself)
 
My V/F curve is definitely broken now
 

Got it now: * Bottom Left Corner.


It looks like you are showing OC Scanner in the first Image?

Yes, the OC Scanner launches automatically and crashes itself. After the crash of the OC Scanner, my screen starts blinking even if I have closed Precision X OC.

Did you install the EVGA OC Scanner?
If so remove all the EVGA Software and start over, install the EVGA OC Scanner software After Precision XOC

I have reinstalled the EVGA Precision X OC again but this time it won't start up even I have clicked on it several times.
The problem is similar to that mentioned in this thread: 
http://forums.evga.com/Pr...start-up-m2487717.aspx

Firezen42

bcavnaugh

Firezen42

bcavnaugh

Firezen42

bcavnaugh

Firezen42
 Does it mean that the process clearing the EVGA register files is no longer needed?
 

I cannot not say, maybe an EVGA Tech will post this info.
 
Did you remove the software and reboot and then download 6.0.1 install " As an administrator" and is it still showing as 6.0.0?
 

It is still showing as 6.0.0 when I open the software but it is correctly shown as 6.0.1 in the control panel ...
 
New issue discovered: After reinstalling the software, now the Auto OC will launch automatically and crash itself. (Not a driver crash but the software itself)
 
My V/F curve is definitely broken now
 

Got it now: * Bottom Left Corner.
IMAGE REMOVED

It looks like you are showing OC Scanner in the first Image?

Yes, the OC Scanner launches automatically and crashes itself. After the crash of the OC Scanner, my screen starts blinking even if I have closed Precision X OC.

Did you install the EVGA OC Scanner?
If so remove all the EVGA Software and start over, install the EVGA OC Scanner software After Precision XOC

I have reinstalled the EVGA Precision X OC again but this time it won't start up even I have clicked on it several times.

Before you re-installed did you delete the folder "C:\Program Files (x86)\EVGA\PrecisionX OC" this is where your old profiles are stored and should not be reused. In the C:\Program Files (x86)\EVGA\PrecisionX 16 folder is a folder called Profiles that must be deleted.

OS Version: Windows 10 64 Bit
NVIDIA Graphics Driver Version: 368.25 WHQL
EVGA Precision X OC Version: 6.0.1
 
Bug - OCScanner starts by itself randomly after waking the computer from sleep. I do not have OC Scanner installed.
 

 
 
 

bcavnaugh

Firezen42

bcavnaugh

Firezen42

bcavnaugh

Firezen42

bcavnaugh

Firezen42
 Does it mean that the process clearing the EVGA register files is no longer needed?
 

I cannot not say, maybe an EVGA Tech will post this info.
 
Did you remove the software and reboot and then download 6.0.1 install " As an administrator" and is it still showing as 6.0.0?
 

It is still showing as 6.0.0 when I open the software but it is correctly shown as 6.0.1 in the control panel ...
 
New issue discovered: After reinstalling the software, now the Auto OC will launch automatically and crash itself. (Not a driver crash but the software itself)
 
My V/F curve is definitely broken now
 

Got it now: * Bottom Left Corner.
IMAGE REMOVED

It looks like you are showing OC Scanner in the first Image?

Yes, the OC Scanner launches automatically and crashes itself. After the crash of the OC Scanner, my screen starts blinking even if I have closed Precision X OC.

Did you install the EVGA OC Scanner?
If so remove all the EVGA Software and start over, install the EVGA OC Scanner software After Precision XOC

I have reinstalled the EVGA Precision X OC again but this time it won't start up even I have clicked on it several times.

Before you re-installed did you delete the folder "C:\Program Files (x86)\EVGA\PrecisionX???" this is where your old profiles are stored and should not be reused. In the C:\Program Files (x86)\EVGA\PrecisionX 16 folder is a folder called Profiles that must be deleted.

Yes, of course I have done this in my uninstallation process.

jonym10
OS Version: Windows 10 64 Bit
NVIDIA Graphics Driver Version: 368.25 WHQL
EVGA Precision X OC Version: 6.0.1
 
Bug - OCScanner starts by itself randomly after waking the computer from sleep. I do not have OC Scanner installed.
 

 
 
 

Looks like it is build in, checking now.
Most have the Old version installed I wonder if it needs to be removed before this new X OC is installed?
 
zx_demo.exe & zx_demo_x64.exe are installed into the same folder "C:\Program Files (x86)\EVGA\PrecisionX OC"
 
I would remove ALL EVGA Software and only install the new EVGA Precision X OC and DO NOT install the Older OC Scanner.
 

bcavnaugh
 

Looks like it is build in, checking now.
Most have the Old version installed I wonder if it needs to be removed before this new X OC is installed?
 
zx_demo.exe & zx_demo_x64.exe are installed into the same folder "C:\Program Files (x86)\EVGA\PrecisionX OC"
 
I would remove ALL EVGA Software and only install the new EVGA Precision X OC and NOT install the Older OC Scanner.

I forgot to mention, obviously this happens only when Precision X OC is running in the background.
It does seem like it's built in.
 
Thanks I will try a full re-install.

bcavnaugh

jonym10
OS Version: Windows 10 64 Bit
NVIDIA Graphics Driver Version: 368.25 WHQL
EVGA Precision X OC Version: 6.0.1
 
Bug - OCScanner starts by itself randomly after waking the computer from sleep. I do not have OC Scanner installed.
 

 
 
 

Looks like it is build in, checking now.
Most have the Old version installed I wonder if it needs to be removed before this new X OC is installed?
 
zx_demo.exe & zx_demo_x64.exe are installed into the same folder "C:\Program Files (x86)\EVGA\PrecisionX OC"
 
I would remove ALL EVGA Software and only install the new EVGA Precision X OC and NOT install the Older OC Scanner.
 

After reinstalling Precision X OC again, I still cannot run the Auto OC feature as the "run" button is again darkened.
I didn't install the old OC Scanner as I know that the new OC Scanner is integrated in Precision X OC.
 
However, if I click on zx_demo_x64.exe in the folder where Precision X OC is installed, the program can run but it's not able to do Auto OC as promised.
 

Disable VSYNC and retest.
 
"However, if I click on zx_demo_x64.exe in the folder where Precision X OC is installed, the program can run but it's not able to do Auto OC as promised."
It is new software give it some time for EVGA to make Updates and Changes as needed.
After all we are the test bed for this Free Tool!