I must say the temps are good on this GPU im idle at 22/23 and full load in valley 44,  room temp 21 not got onto gaming yet, the only prob ive got is a clicking sound from the fan that sounds like its hitting something but its not, and the fan is the loudest thing in my case, i think i might take the fan off and put something else on it and just control it via the motherboard, the asic on mine is 68.3% with a boost of 1378 out the box, not done any overclocking yet. Also ive got the fan as pull,and itook the stock TIM off and put on thermal grizzly.

Try a Corsair SP120 if the cost isn't too high or a Gentle Typhoon. Both are great fans and those temps sound awesome :-)

Thanks eVGA, the shrouds arrived right on time and I finally got the time to install them. Absolutely love them! =D
 
  

Any chance of getting them for the Australian and New Zealand owners?

It's an immense bummer that I found out the LED is only white. I heard from someone that it was an RGB LED but it turns out it isn't.
 
Does anyone know how that thing is assembled? I changed the colour of my SLI bridge by taking out the LED and putting a green filter over the white plastic. It also came with some colour changing stickers in the box.

So ive chucked the Fan that came with the Gpu out the window, it was to loud for my liking, ive set-up a push pull on the rad using EK varder F3ER and attached to my motherboard via PWM controlled with speedFan 4.51 and my system is near silent, been testing all day with different fan settings through speedfan and i cant get it lower than 22/23 so that must be the mean temp off the card, and in valley at load im seeing 42/44 , my fans set to 55% at over 40 degrees, had a quick go at BF4 which was the same 44 at 62% fan speed, i have a very slight coil whine but it comes and goes and nothing to serious, ive had alot worse and this is nothing, super impressed with this card. All i say is ditch the fan it comes with and get something decent, and get it controlled with speedfan or your bios.

What Varder fan is that exactly? And your fan speed is what? Thanks.

Hopper64
What Varder fan is that exactly? And your fan speed is what? Thanks.

EkwB varder F4ER not f3, hightest fan speed i got to control at those temps were 62% in BF4 and 55% in valley thats push pull, single fan in push or pull i was seeing higher temps but ramping up the fans to 65%/70%, it was slightly better in pull than push.

I also dumped the fan that came with this and put two PWM Noctua iPPC 3000 RPM industrial fans on the rad in push/pull for each of my cards. The fact that their also dust proof and water resistant is a nice touch for rad fans. Noctua is also coming out with something call Chromax so that you can change the colors of the vibration dampeners. Red on Black Noctua fans are gonna look pretty sick.

Thanks guys. Appreciate it.