614318
tdp is low, why?

was this after a bios flash? If so, tpd should be lower...84% of 350 (if that is waht you modded the bios to be @ 100% tdp) is 294 watts...I don't know which card you have, but I can bet it isn't rated at 294 watt tdp "out of the box", so Yeah, might be normal.
 
 
Also, big thanks to all that participated in this thread, I learned a lot and it helped me feel confident enough to mod and flash my bios. 

This is flash bios from overclock . net 1.25v 425w
I overclock my processor 4.545mhz and have same score 2655
what problem with computer?
any help,any advices)

614318
This is flash bios from overclock . net 1.25v 425w
I overclock my processor 4.545mhz and have same score 2655
what problem with computer?
any help,any advices)

Make sure your graphics card is installed into pci-e slot #1 the closest slot to the cpu. Make sure you have no other expansion cards installed into the system other than your graphics card. Make sure your gpu is running at pci-e 3.0 x16 @ x16 3.0 when being loaded, this can been seen under gpu-z. Try performing a clean boot of windows to see if it helps increase your score. Try some different drivers other than 358.50.

I do everything what you say. I disable on motheboard all pci-e ,only slot1(very high slot) working, i check gpu-z  -work 3.0 , i install drivers new yesterday,windows work only 20days
I have one idea but i need help with edit bios
I want disable boost on videocard
Like in old videocards
I want gpu 1100mhz-1.193v(by default) then i will use AB and with slider on AB i will push 1.255v and put 1600mhz
I think boost working not right in program or in videocard ,I think 1600 it fake
I will be very grateful for the help


 
 

This giude should help you figure out how to disable the boost on your card. If you can't figure it out I'll help.

Sorry for me it dark Forest
I can't do it my language is not well for understanding everything small thing by theme, i am not want to kill my videocard by my stupid hands and head
Please if you have  opportunity to make things right ,please help
 i want  put voltade from slider AB (my videocad Part Number: 06G-P4-4992-KR
Part Desc: EVGA GeForce GTX 980 Ti Superclocked)
in default i want 1100mhz-1.193v or lower 1.187
and then from AB use Core Voltage put 1.255 or 1.287v-on future and push 1600mhz -you can do it in AB voltage slider will be work?
Thank you very much for you help and advices, please help

614318
Sorry for me it dark Forest
I can't do it my language is not well for understanding everything small thing by theme, i am not want to kill my videocard by my stupid hands and head
Please if you have  opportunity to make things right ,please help
 i want  put voltade from slider AB (my videocad Part Number: 06G-P4-4992-KR
Part Desc: EVGA GeForce GTX 980 Ti Superclocked)
in default i want 1100mhz-1.193v or lower 1.187
and then from AB use Core Voltage put 1.255 or 1.287v-on future and push 1600mhz -you can do it in AB voltage slider will be work?
Thank you very much for you help and advices, please help

Here is the 980Ti-SC-MaxAir bios with boost disabled, 1100 default, 1.25v for any frequency at load... http://www.mediafire.com/...tw/980Ti-SC-MaxAir.rom

Sajin thanks for all the help in forums, sorry that I have not been here to help, been soo busy with college .... I will be checking on this though to helping any questions you guys got also.

cdc-951
Sajin thanks for all the help in forums, sorry that I have not been here to help, been soo busy with college .... I will be checking on this though to helping any questions you guys got also.

No problem. 

Thank you for your help,thank you for bios ,but something wrong
my score 2666
I dont understand why inspector and AB show me 1604-1599 mhz but gpu-z 1347
what trust?
Or 1347-245=1102mhz gpu-z
1347+245=1592mhz inspector and AB say
whare is mistake 
 
because on 1625 i have bsod and 1347mhz with my asic 83.7 and watercooling is too low