Scarlet-Tech

Kronvict

Scarlet-Tech
Scouts honor. :-) you can grab a tape measure, if you have one, and measure slot to slot. It is the same spacing as the SLI finger. The red slots are 40mm apart, for sure, so adding one in between would be 60.

If it is a metal tape measure, just put a piece of tape over the tape measure and don't push it into anything. Lol, I say it because some people will jam the hold tab into the slot... Don't do that. ;-)

Depends on the motherboard. My 60mm 2way sli bridge goes from slot 1 to slot 4 on the Maximus VI Formula. 
 

Yes, yours are at 60mm.  we are talking about a completely different platform and you also skipping the rest of our conversation where it was discovered that he needs the 3 way bridge because of spacing due to his specific motherboard.

Yeah i noticed that after i posted but didn't get a chance to edit. My bad.

@Scarlet-Tech , Will it work with a 3way bridge if I only have 2 cards then? Sorry I'm new to SLI. 
@EVGA_JacobF

Yes, the 3-way SLI bridge will work if you're only using two cards and have to use them purely for spacing reasons.
 
No, the 4-way SLI bridge only works in 4-way configurations.

Dreamss... Try uninstalling the drivers again. Then with all 3 cards enabled with the mb switch, install the NVidia drivers with all 3 cards at once.  Use one of the hard 3 SLI connectors. Make sure all monitors (if using multi monitors) are connected to the first card.
If your using the ribbon SLI cables you need to connect the first card to the 2nd and then the 2nd card to the 3rd. No criss crossing the ports or skipping card with the ribbons.
 
If that's still not working something is prob messed up in the os from all the drivers uninstalls and reinstalls.. prob left over crap. Try to uninstall the nvida drivers using DDU. If still nothing i'd just bite it and do a fresh install of windows.
 
 
P.S. Also only have the main monitor connected when you first try SLI the 3 cards. See if that works before connecting the other one.. might be getting all confused.

For those asking....If you're not sure on what SLI Bridge, get the 3 Way SLI it will fit, if you have that open space in between.
As you can see I have the old setup before the GTX 970 SC upgrade on my Rampage IV Black Edition same fit.

 
 

Love the new SLI look, but some how I always get screwed by EVGA!...
 
1st - When I purchased the old SLI Pro at the time it came out, it wasn't mention at all that the light wasn't going to work on the GTX 670 4GB SC.
2nd- I was basically rushed into buying the GTX 970 SC because of the advertising free backplate! waited so long for them due to backed up and lack of communication!
3rd- By that time I got everything together, I never got that chance to do the upgrade step program!on my GTX 970 SC "4GB" thanx! too the loooonnnng process and my constant detective calling EVGA!
4th- The old SLI Pro light also does not work for the GTX 970 SC I'm stuck with and Now this new SLI Pro only works with the GTX 970 SSC or better!
 
My Marriage life with EVGA 

seems the DSR flicker is not from the sli bridge... BUT got SLI+GSYNC+DSR to work WOOT. im gonna call evga tomm and see if they can send me  nv bridge for testing
 
It worked just fine but rauires work and troubleshooting

seems nv control panel wont add the custom res when gsync is enabled

I had dsr running while full screen with no flicker for anything under 3840, seems rhe flicker is from running the full screen game with a diff res than the main monitor. i used nvlddmkm-patcher-full.exe (for just incase)

also changed my cards bios disp to 640, (red boxes in kep bios tweaker)

basicly had to change all this **** in the ss

Quick question I'm running PNY GTX 550Ti SLI on EVGA 750i FTW board will the 2-way long work with my config ? Somehow I cracked the on that came with the board. Thanks

Any one know what bridge would work on the Asus Maximus Hero VI? I have my cards in the 2 red slots' which are 2 and 4 I believe if counting the 1x slots. Though the spacing seems to be a little weird on the board. I picked up a 3 way pro bridge at micro center yesterday when I got my second 980 but it didn't fit. With the top fingers on, the middle ones are between the cards and the bottom ones are two low. Any help would be appreciated. Really like the look of these new bridges so will definetly pick one up when they become available (Hopefully soon).

Looks the business!  
 
but I dont put any time or effort into making the inside of my case look sexy anymore, so not much point for me.