ShadowGuildINC
I would like to know if the LEDs on this SLI bridge will light up if I use it on two Gigabyte Windforce G1 980ti's? Thanks.

It should, yes.

Thanks for the reply I would also like to which SLI bridge to get. My motherboard is the MSI Z97S SLI Krait edition and my case is a Corsair 780t

ShadowGuildINC
Thanks for the reply I would also like to which SLI bridge to get. My motherboard is the MSI Z97S SLI Krait edition and my case is a Corsair 780t

2 way long as well. Case doesn't change anything in this situation.

I think I need a 3way for my 2 cards, but want to make sure. I'm running a Z170 Classified with a card in 1 and 4. Because of the space between 1 and 2, I need the 3way bridge?

Yep, 3way for slot 1 and 4. 2 way for slot 1 and 3 (the lanes I suggest if you aren't using more than 2 cards).

Slot 1 and 3 are x8 straight to the cpu when the plx chip isn't utilized.

Slot 1 is x8 to the cpu and slot 4 is x16 through the plx to the cpu when the plx is utilized.

For everyone who didn't get theirs to light up even with supported cards here is your possible solution.
 
 
 ugh, ok i can't post links yet.  Search the Nvidia reddit thread for "How to use Nvidia LED visualizer without GeForce Experience"
 
www.reddit.com/r/nvidia/comments/3elvsw/guidehow_to_use_nvidia_led_visualizer_without/

seatownflyer
For everyone who didn't get theirs to light up even with supported cards here is your possible solution. 

You need more posts to input links. Break the link like in the example below.

Www(.)evga(.)Com

I have the old EVGA (Pro SLI 3-Way/2-Way) with LED which was never meant to work with the 970's SC ACX 2.0 ...

I'm thinking on getting this (Pro SLI V2) 2-Way Long. Now my question is, will the LED work with my 970's SC ACX 2.0 SLI setup? if so, do I need to run a software for that

exilelrrp
I have the old EVGA (Pro SLI 3-Way/2-Way) with LED which was never meant to work with the 970's SC ACX 2.0 ...I'm thinking on getting this (Pro SLI V2) 2-Way Long. Now my question is, will the LED work with my 970's SC ACX 2.0 SLI setup? if so, do I need to run a software for that

The bridge isn't the item that is the issue. The 970 doesn't have the power connector for the sli finger to power the bridge. Buying another bridge will not provide power, you will have the same results.

Scarlet-Tech

exilelrrp
I have the old EVGA (Pro SLI 3-Way/2-Way) with LED which was never meant to work with the 970's SC ACX 2.0 ...I'm thinking on getting this (Pro SLI V2) 2-Way Long. Now my question is, will the LED work with my 970's SC ACX 2.0 SLI setup? if so, do I need to run a software for that

The bridge isn't the item that is the issue. The 970 doesn't have the power connector for the sli finger to power the bridge. Buying another bridge will not provide power, you will have the same results.

So, again I'm assed out!