How well do these AIO coolers work for GPUs?  I never got into them with the rest of the system. 

rh0ne

Nitemare3219

EVGA_JacobF
Update on Hybrid Cooler / TITAN X compatibility, it actually does work and fit. The only issue is that the shroud will say GTX 980 on it :p

How much power does it draw though - any concerns with running it on an OC'd TITAN X? Have specs for tubing length too? Also, any word on availability of the standalone units? I can't remember if they were in-stock before... but they sure aren't now... and I WANT TWO! 

I'm very interested in tubing length specs too... I'd need to run two in SLI and I'm trying to picture how I'd lay that out in my case.

 
Tubing length is about 14 Inches.
 

HotRats1522
How well do these AIO coolers work for GPUs?  I never got into them with the rest of the system. 

 
Somewhat like the Corsair H100 or H80 CPU Closed Loop Water Cooler.

rh0ne
 
I'm very interested in tubing length specs too... I'd need to run two in SLI and I'm trying to picture how I'd lay that out in my case.

Why not just a custom loop at that point?  You also running an AIO for the CPU?

HotRats1522
Why not just a custom loop at that point?  You also running an AIO for the CPU?

Cost, maintenance, less time (more kids), and general laziness?
 
Actually I haven't ruled out a 'real' loop yet, just weighing my options. I've had dual loops (CPU, GPUs) for years, but I went with CPU AIO in this latest build (I have to update my avatar) and I gotta say I'm really comfortable with the convenience vs performance tradeoff. So in my 900D if I could relatively painlessly get the rads of these puppies down to where I'd potentially stick a 480 were I to go custom, I might just do it and try my luck in a full AIO mode this time.

Got my GTX 980 Hybrid a few days ago and I did overclock it to 1568MHz
 
Idle Temps: 25C
Max Temps: 45C

rh0ne

HotRats1522
Why not just a custom loop at that point?  You also running an AIO for the CPU?

Cost, maintenance, less time (more kids), and general laziness?
 
Actually I haven't ruled out a 'real' loop yet, just weighing my options. I've had dual loops (CPU, GPUs) for years, but I went with CPU AIO in this latest build (I have to update my avatar) and I gotta say I'm really comfortable with the convenience vs performance tradeoff. So in my 900D if I could relatively painlessly get the rads of these puppies down to where I'd potentially stick a 480 were I to go custom, I might just do it and try my luck in a full AIO mode this time.

I've got a 900D and I can't imagine three AIO's not fitting.  Might not look super, but I'm sure it will fit (I'm thinking CPU and top card to the ceiling and the bottom card to the bottom side).
 
What are you seeing AIO with the CPU versus custom?  Comparable?

bcavnaugh

rh0ne

Nitemare3219

EVGA_JacobF
Update on Hybrid Cooler / TITAN X compatibility, it actually does work and fit. The only issue is that the shroud will say GTX 980 on it :p

How much power does it draw though - any concerns with running it on an OC'd TITAN X? Have specs for tubing length too? Also, any word on availability of the standalone units? I can't remember if they were in-stock before... but they sure aren't now... and I WANT TWO! 

I'm very interested in tubing length specs too... I'd need to run two in SLI and I'm trying to picture how I'd lay that out in my case.

 
Tubing length is about 14 Inches.
 

14 inches from the heatsink or 14 inches from the card shroud opening?

Nitemare3219

bcavnaugh

rh0ne

Nitemare3219

EVGA_JacobF
Update on Hybrid Cooler / TITAN X compatibility, it actually does work and fit. The only issue is that the shroud will say GTX 980 on it :p

How much power does it draw though - any concerns with running it on an OC'd TITAN X? Have specs for tubing length too? Also, any word on availability of the standalone units? I can't remember if they were in-stock before... but they sure aren't now... and I WANT TWO! 

I'm very interested in tubing length specs too... I'd need to run two in SLI and I'm trying to picture how I'd lay that out in my case.

 
Tubing length is about 14 Inches.
 

14 inches from the heatsink or 14 inches from the card shroud opening?

No mater which end I measure from the Tubing it is still 14 inches.
I did not remove the shroud, would you like me to Remove the Shroud and measure for you?

HotRats1522
I've got a 900D and I can't imagine three AIO's not fitting.  Might not look super, but I'm sure it will fit (I'm thinking CPU and top card to the ceiling and the bottom card to the bottom side).
What are you seeing AIO with the CPU versus custom?  Comparable?

Yeah comparable. I'm push/pulling an h100i which is a 240 on top which limits me a little up there so I'd rather send the GPUs down to the bottom. Other than the buggy Corsair Link software, I've been happy it. It sits in the mid/upper 20s 'idle', floats around in the 30s while gaming and If I'm burning it, it will get into to 50s (5930@4.25, nothing uber).

bcavnaugh

Nitemare3219

bcavnaugh
Tubing length is about 14 Inches.

14 inches from the heatsink or 14 inches from the card shroud opening?

No mater which end I measure from the Tubing it is still 14 inches.
I did not remove the shroud, would you like me to Remove the Shroud and measure for you?

Thanks for the measurement! (from the shroud is good enough for me.)