2015/03/07 22:46:13
Stay Puft
Were getting close.....


H100 being used till my other quad 120 arrives
2015/03/09 08:46:25
kolemunky
Glorious classies!!!! Glub glub glub

Attached Image(s)

2015/03/10 03:05:01
cerealkeller
Can some other owners of the EK 980 Classy block post some temps they're getting with clock speeds, voltage and loop configuration.
 
I have 2 980 classys with the EK blocks, I'm running 1.42v at 1600 MHz and getting temps in the low 50s.  I ran my Titans on the same loop but with a  set of Koolance blocks at 1.4v at 1250 MHz and only had temps around the low 40s C.  I've got a high volume pump, Koolance coolant, Prolimatech PK-3 paste and a 240mm rad after card one and a 280mm after card two, each 60mm thick.  Do these cards tend to create a lot of heat for the amount of power they draw?  I was surprised to see temps 38c-41c even at stock voltage and clocks.
2015/03/10 04:27:09
kolemunky
25c  at stock settings .  34 load with +110 gpu +500 mem stock voltage.  one of my radiators is thicker than yours.  
2015/03/10 08:07:49
Stay Puft
cerealkeller
Can some other owners of the EK 980 Classy block post some temps they're getting with clock speeds, voltage and loop configuration.
 
I have 2 980 classys with the EK blocks, I'm running 1.42v at 1600 MHz and getting temps in the low 50s.  I ran my Titans on the same loop but with a  set of Koolance blocks at 1.4v at 1250 MHz and only had temps around the low 40s C.  I've got a high volume pump, Koolance coolant, Prolimatech PK-3 paste and a 240mm rad after card one and a 280mm after card two, each 60mm thick.  Do these cards tend to create a lot of heat for the amount of power they draw?  I was surprised to see temps 38c-41c even at stock voltage and clocks.




 
What bios are you running on your classifieds? 
2015/03/10 08:19:23
cerealkeller
Just the factory BIOS.
2015/04/17 23:42:58
aandrewjeski
Hey guys, I'm new to water cooling but want to make the jump for my SLI classy setup. Does anyone have any helpful resources about what composite/material is best, how to choose fittings, tubing, reservoirs, etc? I've had some trouble finding recent and relevant info. Thanks!
2015/04/18 05:56:24
kolemunky
Ekwb website will have all the info you need. Get part numbers from them. Performance pcs is a great place to order from. Post back here if you have questiins
2016/11/03 04:10:25
cerealkeller
I have a set of GTX 980 Classified with EK water blocks on Ebay for sale if anyone is interested.  $365 each or $700 for the pair.  Comes with the EK Acetal + Nickel blocks with matching back plates, original cooler, base plate, EVGA Classified back plate and all the original packaging.  3988 model.

Use My Existing Forum Account

Use My Social Media Account