JerkMan
I had the UPS customer center hold it for me and I picked it up after work, which was 5 minutes away. Happily, I will not be able to install them as I think my wife's water just broke...

damnit maan!  get that woman to the hospital,,,  and congrats!

Fed Ex is still in the race!
 
may see it after all!!!
 

 
 
 

TRICK OR TREAT!!
 
Although I KNOW I shouldn't be Showing you Guys photos of my Special "GPU Only" Water Block Cooling Mods that I have been using for Testing/Benching with my EVGA GTX 980 SC ACX 2.0 Graphics Cards and others in the past, But Since it's Hallowe(e)n , I though I might as well show you the Physical Difference in Size and Totally different Circuitry Components shown (with the Factory Air Coolers Removed) between an EVGA GTX 980 SC ACX 2.0 with a GPU Only Water Block Mod, and the Same Block on an EVGA GTX 980 Classified ACX 2.0.
 
And Yes, They Do work very well.......
 
Top of Pic is an GTX 980 SC ACX 2.0.....Bottom of Pic is an GTX 980 SC Classified ACX 2.0
 

 

 

AWESOME, did you take any of the bare PCB, could be the first ever look on the web if so!!!
 
sorry, after a closer look , is that plate over the pcb part of the stock / cooler 

hallowen
TRICK OR TREAT!!
 
Although I KNOW I shouldn't be Showing you Guys photos of my Special "GPU Only" Water Block Cooling Mods that I have been using for Testing/Benching with my EVGA GTX 980 SC ACX 2.0 Graphics Cards and others in the past, But Since it's Hallowe(e)n , I though I might as well show you the Physical Difference in Size and Totally different Circuitry Components shown (with the Factory Air Coolers Removed) between an EVGA GTX 980 SC ACX 2.0 with a GPU Only Water Block Mod, and the Same Block on an EVGA GTX 980 Classified ACX 2.0.
 
And Yes, They Do work very well.......
 
Top of Pic is an GTX 980 SC ACX 2.0.....Bottom of Pic is an GTX 980 SC Classified ACX 2.0
 

 

 

OMG! How wide is Classified? Is it curved, or it is photo issue? Look @ edited photo: 

I can't add link to photo.

Pgcmoore
AWESOME, did you take any of the bare PCB, could be the first ever look on the web if so!!!
 
sorry, after a closer look , is that plate over the pcb part of the stock / cooler 

Underneath the Factory Heat Sink (Plate) is pretty much the same as an EVGA GTX 780Ti Classified Kingpin Edition looks like, But I had already re-installed the Plate before I took any Pics and added the GPU Water Blocks, Which BTW I bought last Year on Ebay for $25 each.
 
Since I am CONSTANTLY changing to New Graphics Cards on an almost Monthly Basis, I Just got Tired of spending Hundreds of Extra $$$ for Full Cover Water Blocks every time a New PCB design came out, Then finding out that the old ones I bought wouldn't fit the New PCB Design, So I improvised a Little........  

hallowen

Pgcmoore
AWESOME, did you take any of the bare PCB, could be the first ever look on the web if so!!!
 
sorry, after a closer look , is that plate over the pcb part of the stock / cooler 

Underneath the Factory Heat Sink (Plate) is pretty much the same as an EVGA GTX 780Ti Classified Kingpin Edition looks like, But I had already re-installed the Plate before I took any Pics and added the GPU Water Blocks, Which BTW I bought last Year on Ebay for $25 each.
 
Since I am CONSTANTLY changing to New Graphics Cards on an almost Monthly Basis, I Just got Tired of spending Hundreds of Extra $$$ for Full Cover Water Blocks every time a New PCB design came out, Then finding out that the old ones I bought wouldn't fit the New PCB Design, So I improvised a Little........  

WOW! That is awesome you still using your chiller ? Any chance you can post a pic of your whole setup ?
 
Thanks  

hallowen

Pgcmoore
AWESOME, did you take any of the bare PCB, could be the first ever look on the web if so!!!
 
sorry, after a closer look , is that plate over the pcb part of the stock / cooler 

Underneath the Factory Heat Sink (Plate) is pretty much the same as an EVGA GTX 780Ti Classified Kingpin Edition looks like, But I had already re-installed the Plate before I took any Pics and added the GPU Water Blocks, Which BTW I bought last Year on Ebay for $25 each.
 
Since I am CONSTANTLY changing to New Graphics Cards on an almost Monthly Basis, I Just got Tired of spending Hundreds of Extra $$$ for Full Cover Water Blocks every time a New PCB design came out, Then finding out that the old ones I bought wouldn't fit the New PCB Design, So I improvised a Little........  

Outstanding!! I think I may go the same route with my new next build, 

well, so much for my luck, it just changed