EVGA_JacobF
 
Hardware used:
EVGA X99 Classified
Intel 5820K CPU
DDR4 2133MHz
 

And a PCIe 1.0 x16 gpu :P is that a 8800GTX?

I am not by any means an experienced overclock-er but I have finally got my board pretty stable, 4.66 on the 5930k and 2667 on the Corsair Dominator platinum ram. The Processor OC went pretty easy but I have pulled my hair out on the memory oc. Couldn't get the xmp profiles to work at all, finally got it to work just entering the timings, voltage and freq's manually on stock 100 blk clock. 

4.9 Over Clock
 

1.275v?!?!?! You're the luckiest fother-mucker on the planet! Whats the temps like?

ValkyrieStar
1.275v?!?!?! You're the luckiest fother-mucker on the planet! Whats the temps like?

Highest I have seen is 65

Tiffo60

ValkyrieStar
1.275v?!?!?! You're the luckiest fother-mucker on the planet! Whats the temps like?

Highest I have seen is 65

Thats damn sweet, my 5820K gets pretty toast at 1.075v @ 4.0ghz
I can push it to 4.3 at 1.2 ish volts but temps are on the verge of throttling. In less stressful benches i can push 4.6 and even 4.7 at 1.375v but h264 rendering with AVX2 support instantly overheats, throttles and sometimes even shuts down :(

Im on a full custom loop aswell, 240 + 360 rad. Seems i just have a really 'leaky' chip.

ValkyrieStar

Tiffo60

ValkyrieStar
1.275v?!?!?! You're the luckiest fother-mucker on the planet! Whats the temps like?

Highest I have seen is 65

Thats damn sweet, my 5820K gets pretty toast at 1.075v @ 4.0ghz
I can push it to 4.3 at 1.2 ish volts but temps are on the verge of throttling. In less stressful benches i can push 4.6 and even 4.7 at 1.375v but h264 rendering with AVX2 support instantly overheats, throttles and sometimes even shuts down :(

Im on a full custom loop aswell, 240 + 360 rad. Seems i just have a really 'leaky' chip.

I'm on a custom loop as well 480mm + 240mm with a EK Block. Seems to keep it in check

Tiffo60

ValkyrieStar

Tiffo60

ValkyrieStar
1.275v?!?!?! You're the luckiest fother-mucker on the planet! Whats the temps like?

Highest I have seen is 65

Thats damn sweet, my 5820K gets pretty toast at 1.075v @ 4.0ghz
I can push it to 4.3 at 1.2 ish volts but temps are on the verge of throttling. In less stressful benches i can push 4.6 and even 4.7 at 1.375v but h264 rendering with AVX2 support instantly overheats, throttles and sometimes even shuts down :(

Im on a full custom loop aswell, 240 + 360 rad. Seems i just have a really 'leaky' chip.

I'm on a custom loop as well 480mm + 240mm with a EK Block. Seems to keep it in check

Which EK block in particular? I'm running Acetal + Nickel supremacy Evo.

I swapped the jetplate and found a 10c drop but my temps are still hitting 70-75c, my room is 23-26 though.

ValkyrieStar

Tiffo60

ValkyrieStar

Tiffo60

ValkyrieStar
1.275v?!?!?! You're the luckiest fother-mucker on the planet! Whats the temps like?

Highest I have seen is 65

Thats damn sweet, my 5820K gets pretty toast at 1.075v @ 4.0ghz
I can push it to 4.3 at 1.2 ish volts but temps are on the verge of throttling. In less stressful benches i can push 4.6 and even 4.7 at 1.375v but h264 rendering with AVX2 support instantly overheats, throttles and sometimes even shuts down :(

Im on a full custom loop aswell, 240 + 360 rad. Seems i just have a really 'leaky' chip.

I'm on a custom loop as well 480mm + 240mm with a EK Block. Seems to keep it in check

Which EK block in particular? I'm running Acetal + Nickel supremacy Evo.

I swapped the jetplate and found a 10c drop but my temps are still hitting 70-75c, my room is 23-26 though.

exactly the same one, I put the plate and jet that was recommended in the paper work before I first installed it.

Tiffo60

ValkyrieStar

Tiffo60

ValkyrieStar

Tiffo60

ValkyrieStar
1.275v?!?!?! You're the luckiest fother-mucker on the planet! Whats the temps like?

Highest I have seen is 65

Thats damn sweet, my 5820K gets pretty toast at 1.075v @ 4.0ghz
I can push it to 4.3 at 1.2 ish volts but temps are on the verge of throttling. In less stressful benches i can push 4.6 and even 4.7 at 1.375v but h264 rendering with AVX2 support instantly overheats, throttles and sometimes even shuts down :(

Im on a full custom loop aswell, 240 + 360 rad. Seems i just have a really 'leaky' chip.

I'm on a custom loop as well 480mm + 240mm with a EK Block. Seems to keep it in check

Which EK block in particular? I'm running Acetal + Nickel supremacy Evo.

I swapped the jetplate and found a 10c drop but my temps are still hitting 70-75c, my room is 23-26 though.

exactly the same one, I put the plate and jet that was recommended in the paper work before I first installed it.

Hmm, guess i just got unlucky with a toasty chip. I'd been using my block on my old Z97 board before i upgraded and forgot to change the parts across.

Was thinking of swapping to a X99 evo full nickel, i'll probably do that sometime down the line when i upgrade from my titan x and get a different block for that etc.