Vlada011
That's nice case, special I like people who make modification on side panel for cubic window.
For me is nicer than 900D. Special interior of 800D, one of most popular PC case ever and long time is atractive.

 
:D

 
Latest stable OC: 
 
http://valid.x86.fr/us0qm3
 

I am going to post screenshots of my bios later , I can't seem to make it stable at any rate !

It's driving me insane! It will pass Aida 64 for 6-10 hours but will crash opening wow

I went from 4.8ghz to 4.4 and thing still not stable

With other boards situation is not much better. People constantly complain on Rampage 5 Extreme.
I had pure suffering first days to force board to OC CPU at all. I had constantly BSOD when I change setting for overclocking with few other people with completely and absolutely identical situation as mine. Many users back Rampage 5 Extreme because many bugs... I advice you only to take look on Newegg and compare user experience for example some EVGA PSU 1000 P2, 1200 P2, 750 G2, EVGA GTX980Ti, TITAN X and on other side Rampage 5 Extreme... You will see what mean nice products and what mean buggy product. From one difference here you will get fast respond and many advice and with other manufacturer you need to pull with nippers every answer from their mouth. 
And I still don't know is it my mobo OK, I set everything just like I want... but off course I will try when summer pass to OC CPU more...
I only know that memory both kits are OK... CPU is very rear fault... and that sold me guy who work in ASUS Serbia... 
Some manager for Balkan or I don't know... If sold me fault processor I will kill him instantly 
And if you think that only is Classy make problem you are wrong... and same situation is on every forum... X99 have more problems than X79.
Some people are happy because they change on MSI, some because change on ASUS, some with GIGABYTE, it's always like that.
OK In my case X99 and 5820K now work as I want, but all of us want to everything work, it's not point to set some settings and than to scare to change. 
But when you have problem on one side than you have experience that with others situation is perfect, but not and with different brands/models people similar as you have own problems and think same for you.
 

Hi,
I just need a little clarification on adaptive voltage and offset.
I'm using 1.1V adaptive with a 200mv offset.
Getting 4.6 stable and 1.26 volts under load. Temps are maxing out at 68 and 35 at idle.
 
I guess it's still got loads of headroom! So I'm wondering if I'm on the right track with the offset.
Should I leave the 1.1 adaptive and bump up offset or leave the offset at 200 and raise the 1.1...
 
I have the micro 2 and 5690 btw.
Really liking it!
My last kit was an X58 UD3 with a Xeon X5690.
Fried it so I really want to avoid that this time.

enkrypt3d

Vlada011
That's nice case, special I like people who make modification on side panel for cubic window.
For me is nicer than 900D. Special interior of 800D, one of most popular PC case ever and long time is atractive.

 
:D

 
Latest stable OC: 
 
http://valid.x86.fr/us0qm3
 

Hi,
Could you post your mems setting and what kind of mems are you using ?
Thanks!
Never mind 😀 I saw it on your link !

 
Are people not using Eleet anymore? Seems a lot easier then flipping in and out of the BIOS to make adjustments...
 

I followed this exactly and I cannot boot past code 91 or 94. I had to switch over to BIOS 2 to get back into windows.

Dhessenius
I followed this exactly and I cannot boot past code 91 or 94. I had to switch over to BIOS 2 to get back into windows.

maybe a clear cmos would have worked as well, try that
 
i have been having the issue as well since the new 1.19 for x99 classified, cant even overclock at all

 
 
[<font][<font]Χαρακτηριστικά:
[<font][<font]Θερμοκρασία: χαμηλή 25-27, και 50-52 max !!
[<font][<font]Επεξεργαστής: Intel i7 5820k CUSTOM BLOCK ΝΕΡΟ 
[<font][<font]MBD: EVGA X99 FTW 
[<font][<font]RAM: 4 x 4 Gb Corsair Dominaitor 3300
[<font][<font]HD: Corsai Force LE SSD 240GB και Corsai Force GT SSD 120 X2 
[<font][<font]GPU: 1 x EVGA 780 Ti BLOCK διαβαθμισμένων CUSTOM ΝΕΡΟ 
[<font][<font]PSU: EVGA SuperNova 1600W P2
 
 
 
[<font][<font] 
 

Nereus
 
Are people not using Eleet anymore? Seems a lot easier then flipping in and out of the BIOS to make adjustments...
 

First time EVGA user so Eleet is new to me, but have used it to test overclock, then back to BIOS to dial in for permanent use. It's a nice simple interface, only issue is that it only shows Vcore on the CPU tab, only the offset/adaptive adjustment on voltage tab.