Scarlet-Tech
I will see if I can find a tape ensure at Walmart and measure them when I get home. I have stock and these kits, so I will lay them side by side for exact measurements..

To answer your question if they will reach the top of your case, it would depend on your case and the full length required to reach the top as well as pass through the port to wrap around. I can not see signatures, so I am not sure about the length you would need overall.

 
Thanks Scarlet-Tech... It's much appreciated.
 
My case is 36in tall . The PSUs will be in the "attic" compartment and some of the pumps/fans will be in the "basement". The case front to back is also 30in deep so many stock cables won't be long enough to reach front mounted Optical drives and fans & fan controllers as well. Hence my desire for longer extensions especially for Molex and SATA power.

Alrighty, I will pictures asap.

24 pin is 25" long end to end.
8 pin cpu is 31" end to end total.
8 pin vga is 31" end to end total.
Sata cables are 23" from the psu to the first sata power connector. There is 5.5" between each connector. 31" total end to end.
The molex is 23.25" from psu to first connector, 5.5" between connectors, and 31" total to the end connector.

The stock cables are exactly the same lengths as the individually sleeved set.

Scarlet-Tech
Alrighty, I will pictures asap.

24 pin is 25" long end to end.
8 pin cpu is 31" end to end total.
8 pin vga is 31" end to end total.
Sata cables are 23" from the psu to the first sata power connector. There is 5.5" between each connector. 31" total end to end.
The molex is 23.25" from psu to first connector, 5.5" between connectors, and 31" total to the end connector.

The stock cables are exactly the same lengths as the individually sleeved set.

YOU ROCK! Thanks for checking Scarlet-Tech.
 
 
hmmm Now to figure out what to do about extensions. Anyone have suggestions?

Any word on availability of the additional cable set for 1600W editions 100-CK-1600-B9 in europe?
also imo those should be proviced free of charge for those that require it when you have to shell out 80EUR for a set...

DewFuss
YOU ROCK! Thanks for checking Scarlet-Tech.
 
 
hmmm Now to figure out what to do about extensions. Anyone have suggestions?

I have not used extensions, so I am honestly not sure.

t3h0th3r
Any word on availability of the additional cable set for 1600W editions 100-CK-1600-B9 in europe?
also imo those should be proviced free of charge for those that require it when you have to shell out 80EUR for a set...

It wouldn't be easy to be provided free for those that require it. They have provided enough for 2 way Sli, which is the "normal" for more than 1 card. There is 3 sets of PCI when you count the 6+2+6 which covers the rest of the above average setups that have 3 way SLI. Of you have the money for quad, the extra kit isn't going to hurt your wallet.

As far as availability, have you tried authorized retailers? I can usually find them on Newegg or Amazon when EVGA is sold out.

my complaint is, that i buy a set that "Supports all EVGA SuperNOVA G2 and P2 power supplies", naively thinking it will be supporting "all EVGA SuperNOVA G2 and P2 power supplies" only to find out that it's actually not for for all, namely too few pci cables (even when actually taking into account those 6+2/6) for anyone actually wanting to use more than 6 cables on the 1600W versions (which has connectors for 9 cables). with the power a 1600W PSU provides, you'll be powering 3-4 GPUs. that's 6 to 8 PCIe connectors/cables or 9-12 in the case of  high end classifieds(3 connectors per card).
 
so maybe revise that to "Supports all* EVGA SuperNOVA G2 and P2 power supplies *) Users wanting to utilize more than 6 cables (i.e. owners of 1600W models) need to get the Additional Power Supply Cable Set 100-CK-1600-B9" or a similar warning. it looks in europe i'll just have to resort getting a second of the full sets.

The power supply and the kit shows exactly what come in it, and if you don't read that, then you are asking for issues. It is the responsibility of the end user to research, as the material is made public to the end user. This isn't hidden. This is a direct copy and paste

Standard kit for 1600p2:
CONNECTOR QUANTITY
24 PIN ATX 1x
EPS (CPU) 2x 8pin (4+4)
PCIE 9x 8pin (6+2), 5x 6pin
SATA 16x
FOUR-PIN PERIPHERAL 6x
FLOPPY 2x

Individually sleeved kit:
Includes the following cables:
1 x 24-pin ATX Cable
2 x 4+4pin EPS12V CPU Cable
4 x 6+2pin PCI-E VGA Cables
2 x 6+2pin + 6pin PCI-E VGA Cables
4 x 3 SATA Cables
1 x 3 Molex Cable
1 x 2 Molex Cable + 1 Floppy Connector

As for stock, they sell out fast. They always have.

1600W models come later and if someone need all cables, more VGA, Additional Set is available for 30$
 
http://www.evga.com/Products/Product.aspx?pn=100-CK-1600-B9
 
That's in case that someone have 4xGTX980 K|NGP|N Classified or similar graphics. 
What to do someone with 750/850 G2 with 9x VGA cables and 120$ kit.

anybody tried using these with the new 1050 GS?  

220-GS-1050-V1

Its not on the list but they look like they would work.
 
 
 

So these do not work on the T2 models?