My Pro Connector and Evga Hydro Copper from the 780 Classified light up.  Everything is lit up but not doing any effect I choose from the listing even though it recognizes the GPU. 
 
Is this only for reference 780s?

Is this software getting an update ?  It's sorely in need of one as in its current incarnation it is buggy.
 
- It loads at startup and resides in the tray, but if you open it there are only two buttons for minimize and close, minimize leaves it in the taskbar after you open it and there is no way to get it back in the tray.
 
- More importantly; settings can be applied and work, but when choose you 'apply at startup', it seems to only make the program load at startup and sit in the tray but the LED settings are not applying.  This leaves you to have to open it to apply them every reboot.
 
This is on 780 Classified HC SLI and the issues are with the SLI bridge lighting.
 
Please get us an update.
 
 

the illuminations range needs to be lowered some for the sli bridges, 100-20 seems to all be the same brightness and from 19-0 does the dimming. 780 classy hydro blocks don't breath at all.
 
Jacob fix us something :-)
 

I've used this software to create ground fx lighting on my case.   I soldered directly to the 12v lines for LED's and wired them to two 12v light strips and have control over the led's via the software.   It works wonderful.   I would like for you to add a option if its not too much to ask.    Strobe effect.  I'd like to cycle between 0 and 100% and enable the slider to control the strobe speed.   If this is possible it would look amazing.  Attached are pictures of the software working.   Strobe effect would just put it over the top for me.
 
I cant post the youtube video but its watch?v=9RZBR1BNvIo
 
 Attachments are not available: Download requirements not met
 
Attachments are not available: Download requirements not met
 
Operating System Microsoft Windows 7 Ultimate
OS Service Pack Service Pack 1
 
Motherboard
CPU Type HexaCore Intel Core i7-4930K, 3600 MHz (36 x 100)
Motherboard Name Asus Rampage IV Gene  (1 PCI-E x4, 3 PCI-E x16, 4 DDR3 DIMM, Audio, Gigabit LAN)
Motherboard Chipset Intel Patsburg X79, Intel Ivy Bridge-E
System Memory 32711 MB  (DDR3-1333 DDR3 SDRAM)
DIMM-A1: Corsair Vengeance CMZ32GX3M4X1866C10 8 GB DDR3-1333 DDR3 SDRAM  (9-9-9-24 @ 666 MHz)  (7-7-7-20 @ 533 MHz)  (6-6-6-17 @ 457 MHz)
DIMM-B1: Corsair Vengeance CMZ32GX3M4X1866C10 8 GB DDR3-1333 DDR3 SDRAM  (9-9-9-24 @ 666 MHz)  (7-7-7-20 @ 533 MHz)  (6-6-6-17 @ 457 MHz)
DIMM-C1: Corsair Vengeance CMZ32GX3M4X1866C10 8 GB DDR3-1333 DDR3 SDRAM  (9-9-9-24 @ 666 MHz)  (7-7-7-20 @ 533 MHz)  (6-6-6-17 @ 457 MHz)
DIMM-D1: Corsair Vengeance CMZ32GX3M4X1866C10 8 GB DDR3-1333 DDR3 SDRAM  (9-9-9-24 @ 666 MHz)  (7-7-7-20 @ 533 MHz)  (6-6-6-17 @ 457 MHz)
BIOS Type AMI (08/29/2013)
 
Display
Video Adapter NVIDIA GeForce GTX 690  (2 GB)
Video Adapter NVIDIA GeForce GTX 690  (2 GB)
Video Adapter NVIDIA GeForce GTX 690  (2 GB)
Video Adapter NVIDIA GeForce GTX 690  (2 GB)
Video Adapter NVIDIA GeForce GTX 690  (2 GB)
Video Adapter NVIDIA GeForce GTX 690  (2 GB)
3D Accelerator nVIDIA GeForce GTX 690
Monitor Asus VE248  [24" LCD]  (D4LMQS010281)
Monitor Asus VE248  [24" LCD]  (B8LMQS013597)
Monitor Asus VE248  [24" LCD]  (B8LMQS013606)
Monitor Asus VE248  [24" LCD]  (B8LMQS013607)
 
Storage
Disk Drive Samsung SSD 840 PRO Series ATA Device  (SATA-III)
Disk Drive ST3000DM001-1CH166 ATA Device  (3000 GB, 7200 RPM, SATA-III)
Disk Drive ST3000DM001-1CH166 ATA Device  (3000 GB, 7200 RPM, SATA-III)
Optical Drive ATAPI iHAS124   W ATA Device  (DVD+R9:8x, DVD-R9:8x, DVD+RW:24x/8x, DVD-RW:24x/6x, DVD-RAM:12x, DVD-ROM:16x, CD:48x/32x/48x DVD+RW/DVD-RW/DVD-RAM)

Temperatures
Motherboard 38 °C  (100 °F)
CPU 24 °C  (75 °F)
CPU Package 37 °C  (99 °F)
CPU #1 / Core #1 30 °C  (86 °F)
CPU #1 / Core #2 32 °C  (90 °F)
CPU #1 / Core #3 27 °C  (81 °F)
CPU #1 / Core #4 28 °C  (82 °F)
CPU #1 / Core #5 31 °C  (88 °F)
CPU #1 / Core #6 27 °C  (81 °F)
PCH 43 °C  (109 °F)
GPU1: GPU Diode 27 °C  (81 °F)
GPU2: GPU Diode 26 °C  (79 °F)
Samsung SSD 840 PRO Series 28 °C  (82 °F)
ST3000DM001-1CH166 (Z1F2SF4Y) 31 °C  (88 °F)
ST3000DM001-1CH166 (Z1F12G75) 31 °C  (88 °F)

for some reason the download link doesnt work

edit: had to refresh a few times for it to download. also it works great

works great on my 980sc cards

Not sure if others noticed, this seems to be integrated into GeForce Experience now.  I don't care to use the effects so I do not know how it works. 

in GeForce Experience I get the bridge to light up and stay lit but no effects. I am assuming that since my 780 sc ACX cards have no leds that this is why the bridge only lights up but no effects.

Q5Grafx
in GeForce Experience I get the bridge to light up and stay lit but no effects. I am assuming that since my 780 sc ACX cards have no leds that this is why the bridge only lights up but no effects.

Is this true? Do the effects work with the ACX cards or not?

shadowboricua

Q5Grafxin GeForce Experience I get the bridge to light up and stay lit but no effects. I am assuming that since my 780 sc ACX cards have no leds that this is why the bridge only lights up but no effects.

Is this true? Do the effects work with the ACX cards or not?

ACX cards do not have controllable leds. Only the reference Cards with NVidia on the side.