demisogi
Hi. I see here that the H80 is possible with the Hydro edition?
Does this apply to the H80i as well because no matter what I do I cannot figure out how to mount it.
I am even trying the Evga Acx mitx cooler and still can't fit that baby in.
Using an Asus VI Impact MOBO with the Hydro case, I was able to mount the radiator of an H80i on the upper back of the case, pulling the tubes through the ridges made for liquid cooling from the fan cutout from the upper front...unfortunately there is not enough space to mount it on the upper front, as intended I'm assuming, the radiators size just misses it. (might be possible to mount it from the inside if you don't have a DVD ROM installed.) Now for the problem, because of the radiators size and mounting it on the upper back and using Noctua S12A's, I could not mount the upper front fan due to the radiators size blocking space for the screw holes. It might just work if you use a thinner cut fan, or if you file it down, or just punch new holes, neither of which I wanted to do, so because it was pretty well tucked into it's position, I just padded the back end with velcro to make it more tight, and velcro stickied both front ends, and now it's packed tight, and nothing is visible as the shell covers all of that.