Does the c14 fit with both fans on it? Which mobo?

I believe it does with ASRock mobo's but you can only use the bottom fan, the top fan won't clear the side panel. Also you might have to sleeve your PSU wires so that they clear the HD drive bay and the cooler.
 
Look at some of the builds on the forum and you'll come across a build with a C14. http://forums.evga.com/tm.aspx?m=2103202

Ja, I see it right up against the glass in that pic, without top fan. Weird.. the c14 with both fans' specs say 140mm, which is what the hadron should accept. WTH?
 

Swiftech h220 be fitting in a hydro?

Is the corsair h75 cooler possible in a hadron air?

EVGA_JacobF

Drerex

Jacob, the EVGA Certified water cooling loop, is that going to be a EVGA branded swiftech? 

No, it is a custom one, but you can really use any CPU waterblock. (Its the reservoir and radiator that are made specifically for the box)

I have the Hadron Hydro with water kit and I couldn't get the CPU backplate to sit flat on the back of the motherboard. I can't remember what it was, but it was sitting on a component on the motherboard that made it uneven. I am using the Z87 Stinger board. No matter which way I turned it, it was uneven. Are you supposed to remove any of the foam pieces? I just installed it the way it came in the box.

Is it possible to mount the 240mm rad of an AIO on the inside of the Hydro case and the fans on the top compartment? Basically switch places between the rad and thr fans?

Any play with a 5.5 height, i guess what I'm asking is if the heatsink will be flush with the plexi. 

Edit: created a topic for all the questions.

Mattv111
Hi I just ordered my Hadron Air and was wondering if the Cooler Master Hyper 212 evo fits in the case.

I can confirm it does not. It's simply too tall, it peeks out of the side of the case quite a bit. One would have to remove the side of the case entirely or just remove the window, which would most likely introduce dust and mess up the cooling on it.