ADANDC650
What in the heck do I need for my 2 x Titan X's? I would like a 3 way SLI Bridge for my 2 TX's but I'm not sure if it will fit. I'll be using slots 2 and 4. Anyone?
 

Edit, looks like the long two way is the one.  60mm.  The 2/3 way is 80mm (40+40) and won't work.  It would work on slots 5 and 7.  Slot spacing is the same as my old Z77 OC Formula.  I used the long two way.

While I was on the Phone verifying my purchase for A Titan Z, I posed the question of doing SLI with two Titan Z cards, I was informed that I would need to use a 4 way SLI bridge. Is this because of the amount of room each card takes up or due to the GPUs ? if it is the spacing then what if down the road water blocks were installed, that would reduce the spacing, or would that not make a difference? And as to the driver install, is or would there be a procedure to follow.
 
 

Titan Z only has one SLI connector, not two like other cards, so you need 2-way bridge of appropriate length which depends on how you install the cards and how your motherboard's slots are spaced.
 
If you install waterblocks, you still have front plates to deal with, which take 3 slots. You'd need to mod those to reduce the spacing.

void_ptr
Titan Z only has one SLI connector, not two like other cards, so you need 2-way bridge of appropriate length which depends on how you install the cards and how your motherboard's slots are spaced.
 
If you install waterblocks, you still have front plates to deal with, which take 3 slots. You'd need to mod those to reduce the spacing.

Thank you very much for the info, I was a bit puzzled when I was told that on the phone by EVGA rep, I thought I was missing something.  

The 3/2 way and 4 way are in stock @ EVGA.  Finally got mine 

Amazon order just updated from 2 month to Friday!

Ugh why won't this work with my 6xx series...

 

Amazon order just updated from 2 month to Friday!

 

saharmohamedali
Ugh why won't this work with my 6xx series...

The ASUS ROG will work with all SLI setups, there is an included cable to use if the SLI pins do not illuminate it.
 
read more here:
 
https://www.asus.com/Moth...t_SLI_Bridge/overview/
 
 
 

My 3 way arrived and already modded and ready for install.