The 2 way bridge has two versions....I got this one for my z77 Sabertooth and it looks similar to your spacing with the extra space between the 2 cards.  The sli bridge with a little more spacing is:
EVGA Pro SLI Bridge 2-Way Graphics Cards (100-2W-0021-LR)
  
But I can't say for sure so maybe someone with the same board can chime in or maybe do a search on it.
 
I think it's also explained on this page:  http://forums.evga.com/EV...-Bridges-m1999556.aspx
 
Found a pic with someone using the evga bridge:  http://forum.corsair.com/./showthread.php?t=128476
 
Unless you're trying to do 3-way SLI in which case I'm pretty sure the 3-way will not work.

Crimson AL
The 2 way bridge has two versions....I got this one for my z77 Sabertooth and it looks similar to your spacing with the extra space between the 2 cards.  The sli bridge with a little more spacing is:
EVGA Pro SLI Bridge 2-Way Graphics Cards (100-2W-0021-LR)
  
But I can't say for sure so maybe someone with the same board can chime in or maybe do a search on it.
 
I think it's also explained on this page:  http://forums.evga.com/EV...-Bridges-m1999556.aspx
 
Found a pic with someone using the evga bridge:  http://forum.corsair.com/./showthread.php?t=128476
 
Unless you're trying to do 3-way SLI in which case I'm pretty sure the 3-way will not work.

Hey was you replying to me ... What is your spacing in MM ?

*delete*

karlfuller

Crimson AL
The 2 way bridge has two versions....I got this one for my z77 Sabertooth and it looks similar to your spacing with the extra space between the 2 cards.  The sli bridge with a little more spacing is:
EVGA Pro SLI Bridge 2-Way Graphics Cards (100-2W-0021-LR)
  
But I can't say for sure so maybe someone with the same board can chime in or maybe do a search on it.
 
I think it's also explained on this page:  http://forums.evga.com/EV...-Bridges-m1999556.aspx
 
Found a pic with someone using the evga bridge:  http://forum.corsair.com/./showthread.php?t=128476
 
Unless you're trying to do 3-way SLI in which case I'm pretty sure the 3-way will not work.

Hey was you replying to me ... What is your spacing in MM ?

60 mm I believe.  It is either 40 mm apart or like mine and it is 60 mm apart (center of pci-e slot to center of next slot).  that pic in my post was someone using the long 2 way sli bridge on the motherboard you have...or so they wrote.  If you are using your two red slots that is.  
 
http://forum.corsair.com/./showthread.php?t=128476
 
The shorter 2 way evga bridge is 40 mm in length...the 3 way bridge has 40 mm in between each finger so it is 80 mm total in length (connecting at 0-40-80 mm).  And there is the longer 2 way sli bridge that is 60 mm in length.  
 

Crimson AL

karlfuller

Crimson AL
The 2 way bridge has two versions....I got this one for my z77 Sabertooth and it looks similar to your spacing with the extra space between the 2 cards.  The sli bridge with a little more spacing is:
EVGA Pro SLI Bridge 2-Way Graphics Cards (100-2W-0021-LR)
  
But I can't say for sure so maybe someone with the same board can chime in or maybe do a search on it.
 
I think it's also explained on this page:  http://forums.evga.com/EV...-Bridges-m1999556.aspx
 
Found a pic with someone using the evga bridge:  http://forum.corsair.com/./showthread.php?t=128476
 
Unless you're trying to do 3-way SLI in which case I'm pretty sure the 3-way will not work.

Hey was you replying to me ... What is your spacing in MM ?

60 mm I believe.  It is either 40 mm apart or like mine and it is 60 mm apart (center of pci-e slot to center of next slot).  that pic in my post was someone using the long 2 way sli bridge on the motherboard you have...or so they wrote.  If you are using your two red slots that is.  
 
http://forum.corsair.com/./showthread.php?t=128476
 
The shorter 2 way evga bridge is 40 mm in length...the 3 way bridge has 40 mm in between each finger so it is 80 mm total in length (connecting at 0-40-80 mm).  And there is the longer 2 way sli bridge that is 60 mm in length.  

 
 
Oh well looks like i am out of luck then :( with my 70mm gap .. shame they don't make more with other size's .. 

Ok been having a bit of bad luck with evga products.  just got two evga 970 ftw cards last week.  today the top one just stopped working so I need to send it back.  I just got my 2 way pro bridge today and since one of my cards is dead can to truly test the bridge.  my question before I return the bridge is will it still light up only connected to one card?  I have seen some videos where it does but mine wont.  example:  look at 8:23 on the timer.

 

karlfuller
I really wanted to buy one of this sli Bridges ,but from reading they need 40mm 60mm 80mm from card to card slot they would not fit my cards on my mobo ...
 
I checked and from slot to slot on each card its 70mm or maybe i am missing some thing here ? I am using Asus MAXIMUS VI HERO mobo 

 
My friend has that Mobo and i have the Maximus VI Formula which both have the same spacing of 60mm which will work with the Maximus VI Hero. Remember you only have to measure from sli finger of the top card to the sli finger of the bottom card only.
 

I bought the two way sli bridge when I had my GTX 660 TI SC cards. Question is, will these work with my two 970 FTW cards?
 

missingman808
I bought the two way sli bridge when I had my GTX 660 TI SC cards. Question is, will these work with my two 970 FTW cards?
 

It won't light up, since the original ftw wasn't wired with that in mind. The FTW+ will light up.

Scarlet-Tech

missingman808
I bought the two way sli bridge when I had my GTX 660 TI SC cards. Question is, will these work with my two 970 FTW cards?
 

It won't light up, since the original ftw wasn't wired with that in mind. The FTW+ will light up.

I am not too worried about the light up feature as my side fan hides the bridge anyway.