BengyDD
Fixed my non-Standard Problem by just cutting off mid-SLI-fingers of the 3way-SLI-card that was delivered with the classified-board....maybe that´ll work with the nice bridges as well ^^
 

 
Get'um MacGuyver!   Pictures?  

Does the 4-way SLI fit a 2-way SLI with single slot spacing between them?

sniperskulls
Hey guys, I need some help. I have an Asus Rampage IV Extreme board and have 780ti classifieds (3 of them) in 3 way sli with the 3 way pro bridge.However when I enable Three-Way SLI the bridge stops lighting up. If i disable sli its all fine again.

Driver Version: 332.21
Win 7 ultimate x64
Geforce Experience: 1.8.2 I have gone to Geforce experience -> my rig -> led visualizer and have literally tried all the LED effects I can. I just want the light on when in triple SLI. Anyone have any ideas? Jacob? Please Help  **EDIT Found out what it is. I had plugged all my monitors into card 3 because it would have the most airflow since it was at the bottom of the case. Triple sli works like this, but the pro sli bridge wont light up unless you have your monitors plugged into the #1 card. PLEASE FIX :( It should just light up when plugged in regardless of SLI. Please help me Jacob

My bridge worked no matter where my monitors were plugged in. Might not have had the bridge in there all the way.

Grey_Beard

sniperskulls
Hey guys, I need some help. I have an Asus Rampage IV Extreme board and have 780ti classifieds (3 of them) in 3 way sli with the 3 way pro bridge.However when I enable Three-Way SLI the bridge stops lighting up. If i disable sli its all fine again.

Driver Version: 332.21
Win 7 ultimate x64
Geforce Experience: 1.8.2 I have gone to Geforce experience -> my rig -> led visualizer and have literally tried all the LED effects I can. I just want the light on when in triple SLI. Anyone have any ideas? Jacob? Please Help  **EDIT Found out what it is. I had plugged all my monitors into card 3 because it would have the most airflow since it was at the bottom of the case. Triple sli works like this, but the pro sli bridge wont light up unless you have your monitors plugged into the #1 card. PLEASE FIX :( It should just light up when plugged in regardless of SLI. Please help me Jacob

My bridge worked no matter where my monitors were plugged in. Might not have had the bridge in there all the way.

You have 780ti classys? In 3 way? what driver version?! I really would like to get this working, but yeah, everytime i plugged in to card 3 the light went off in 3-way-sli. I reseated it NUMEROUS times. but it works fine if the monitors are plugged into card 1... I honestly think its something driver related because it would light fine before windows started. @jacob please?

Hello all,
 
Dsnt work on a 760 sli ?, let me know please ? 

sniperskulls

Grey_Beard

sniperskulls
Hey guys, I need some help. I have an Asus Rampage IV Extreme board and have 780ti classifieds (3 of them) in 3 way sli with the 3 way pro bridge.However when I enable Three-Way SLI the bridge stops lighting up. If i disable sli its all fine again.

Driver Version: 332.21
Win 7 ultimate x64
Geforce Experience: 1.8.2 I have gone to Geforce experience -> my rig -> led visualizer and have literally tried all the LED effects I can. I just want the light on when in triple SLI. Anyone have any ideas? Jacob? Please Help  **EDIT Found out what it is. I had plugged all my monitors into card 3 because it would have the most airflow since it was at the bottom of the case. Triple sli works like this, but the pro sli bridge wont light up unless you have your monitors plugged into the #1 card. PLEASE FIX :( It should just light up when plugged in regardless of SLI. Please help me Jacob

My bridge worked no matter where my monitors were plugged in. Might not have had the bridge in there all the way.

You have 780ti classys? In 3 way? what driver version?! I really would like to get this working, but yeah, everytime i plugged in to card 3 the light went off in 3-way-sli. I reseated it NUMEROUS times. but it works fine if the monitors are plugged into card 1... I honestly think its something driver related because it would light fine before windows started. @jacob please?

No I do not have classifieds, but my 3-way SLI EVGA bridge has always worked.  I originally had two HDMI lines plugged into two different cards.  It lit up.  When I switch to two DVI ports in the first card, still lit up.  Check settings in the NVidia control panel, check the seating of the bridge.  Can be a faulty bridge.  This is a process of elimination.  Sorry I cannot be more helpful.

tanganelli
Hello all,
 
Dsnt work on a 760 sli ?, let me know please ? 

It should work on any 700 series card.  It should light up on those cards.  It will work on any SLI configuration, but the LEDs are only on 700 and above.

I have a ASUS Sabertooth 990FX MB. it has the 3.5 spacing for the sli config. Can someone at EVGA please make a suggestion on making a 3.5 pro sli bridge. I love my 2-3 sli bridge and have conceded to have to purchase the 3.5 hard bridge but find it aesthetically unpleasing. I would be willing to make the mod myself if anyone could tell me if the 4 way sli pro bridge could be disassembled and mated to the 3.5 spacing bridge. I don't even care about the LED since my cards don't have the LED in them but i really like the finished look of the pro-bridge. I purchased this mobo because of the ceramic cooling features and if i had known then what i know now i would have gone with Crosshair v formula z for its 3 way spacing. EVGA can you please accomodate those of us that have this same issue? i know its only a small percent of the market but I myself am a loyal EVGA user and would love to see this product.
 
Thank you,
Q5Grafx
 
Monster Stats:
ASUS SABERTOOTH 990FX R2.0 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard
AMD FD8350FRHKBOX FX-8350 FX-Series 8-Core Black Edition
2X EVGA GeForce GTX780 SuperClocked w/EVGA ACX Cooler 3GB GDDR5 384bit, DVI-I, DVI-D, HDMI,DP, SLI Ready
2X EVGA GTX 780 Backing Plates
1X EVGA 2-3way SLI Probridge
2X Samsung Electronics MZ-7PD128BW 840 Pro Series 2.5-Inch 128GB SATA 6Gbps Solid State Drive
1X WD Velociraptor WD1000DHTZ 1TB 3.5" SATA Hard Drive
2X WD Caviar Green 3 TB SATA III 64 MB Cache Bare/OEM Desktop Hard Drive
2X ASUS BW-12B1ST/BLK/G/AS 12X Blu-ray Internal Burner Drive with Disc Encryption
Corsair Vengeance 32GB (4x8GB) DDR3 1866 MHz (PC3 15000) Desktop Memory
GeIL EVO Cyclone Memory Cooling System
Seasonic 1250W 80 Plus Gold ATX12V/EPS12V Power Supply
3X Noctua (NF-P12 PWM) - 120mm Two Speed Premium Fan, 1300/900 RPM, SSO2 Bearing with NE-FD1 PWM IC
4X Noctua 140mm Premium Quiet Quality Case Cooling Fan NF-A14 FLX
NZXT SENTRY 2 Accessories 5.25-Inch Touch Screen Fan Controller
Corsair Hydro Series H110 280 mm High Performance Liquid CPU Cooler
Corsair Obsidian Series Black 550D Mid Tower Computer Case
Creative Sound Blaster Recon3D THX PCIE Fatal1ty Champion Sound Card
Perixx PX-1100, Backlit Keyboard - Red/Blue/Purple Illuminated Keys
Perixx MX-2000B, Programmable Gaming Laser Mouse
Perixx DX-1000XL, Gaming Mouse Pad - 15.75"x12.60"x0.12"
Avertv Hybrid Volar Max TV Tuner Kit for Windows
August DTA240 High Gain Digital TV Aerial - Portable Indoor/Outdoor Digital Antenna for USB TV Tuner / ATSC Television / DAB Radio - With Magnetic Base
Sabrent VD-GRBR USB 2.0 Video & Audio Capture DVD Maker w/Real Time TV Display Dual Export with capture software
EasyCAP DC60 - USB 2.0 Audio/video Creator Capture High-quality Analog Video
Logisys CCFL 12in Dual UV Cathode
Logisys CCFL 12in Dual Blue Cathode
Logisys CCFL 12in Dual RED Cathode
MSUN 5.25" Pc Media Dashboard Front Panel All-in-1 Card Reader USB HUB Sata/esata/ide
Kingston Digital 16 GB USB 2.0 Hi-speed Datatraveler Flash Drive
8X Silverstone Tek 90 Degree SATA III Cable with Non-Scratch Locking Mechanism
Fully Custom Black Silicon insulated Cotton Wrapped Cables 
Custom tri Color Braided Cotton Wrapped Silicon insulated !2ga. Gold Connector 10' Power Cable

Grey_Beard

sniperskulls

Grey_Beard

sniperskulls
Hey guys, I need some help. I have an Asus Rampage IV Extreme board and have 780ti classifieds (3 of them) in 3 way sli with the 3 way pro bridge.However when I enable Three-Way SLI the bridge stops lighting up. If i disable sli its all fine again.

Driver Version: 332.21
Win 7 ultimate x64
Geforce Experience: 1.8.2 I have gone to Geforce experience -> my rig -> led visualizer and have literally tried all the LED effects I can. I just want the light on when in triple SLI. Anyone have any ideas? Jacob? Please Help  **EDIT Found out what it is. I had plugged all my monitors into card 3 because it would have the most airflow since it was at the bottom of the case. Triple sli works like this, but the pro sli bridge wont light up unless you have your monitors plugged into the #1 card. PLEASE FIX :( It should just light up when plugged in regardless of SLI. Please help me Jacob

My bridge worked no matter where my monitors were plugged in. Might not have had the bridge in there all the way.

You have 780ti classys? In 3 way? what driver version?! I really would like to get this working, but yeah, everytime i plugged in to card 3 the light went off in 3-way-sli. I reseated it NUMEROUS times. but it works fine if the monitors are plugged into card 1... I honestly think its something driver related because it would light fine before windows started. @jacob please?

No I do not have classifieds, but my 3-way SLI EVGA bridge has always worked.  I originally had two HDMI lines plugged into two different cards.  It lit up.  When I switch to two DVI ports in the first card, still lit up.  Check settings in the NVidia control panel, check the seating of the bridge.  Can be a faulty bridge.  This is a process of elimination.  Sorry I cannot be more helpful.

The problem with this is that the only change I have made is plugging the monitors into different cards. If it was a faulty connection (which i have reseated many times) it wouldnt work on the first card or SLI just wouldnt work. I have tried in card 2 and 3 and it just doesn't light up, but in card 1 its fine. I have tried literally every setting in the geforce experience control panel, just doesnt work. Its possible its a faulty SLI bridge, but i would think that either SLI wouldnt work or it wouldnt light up at all if it was.
 

sniperskulls
 
The problem with this is that the only change I have made is plugging the monitors into different cards. If it was a faulty connection (which i have reseated many times) it wouldnt work on the first card or SLI just wouldnt work. I have tried in card 2 and 3 and it just doesn't light up, but in card 1 its fine. I have tried literally every setting in the geforce experience control panel, just doesnt work. Its possible its a faulty SLI bridge, but i would think that either SLI wouldnt work or it wouldnt light up at all if it was.

I just tried to do any effect in the LED Visualizer in GeForce Experience.  They all worked flawlessly.  When I had them in HDMI on two separate cards, same thing.  Try using the DVI ports and see what happens.  Not sure what to tell you to do other than to re-install software.  Make sure you check the clean install button in the custom settings.  After that, I would RMA the bridge if it seated properly and there is adequate power to the cards.  Just seems like a software issue to me.