Just ordered the 2 Way Bridge, will it light up with the EVGA 760 FTW 4GB?

maxiordoqui
Just ordered the 2 Way Bridge, will it light up with the EVGA 760 FTW 4GB?

Yes.

EVGA Classified 3
which bridge can i use for this setup , if you look at this image my titans are where the green dots are, i dont know if the pci counts as a slot or not lol or are we just counting sli express slots
 

BurnOmatic
EVGA Classified 3
which bridge can i use for this setup , if you look at this image my titans are where the green dots are, i dont know if the pci counts as a slot or not lol or are we just counting sli express slots
 

Looks like the 3-way bridge will be the best one to use.

Installed 2-way Bridge:
 

2-2 way bridges? just for looks?
 

jacob650
OK, got my 2-way SLI Bridges in, i realy liked the 3-way better for those who have the Maxmus V Formula 2-way Bridge is your only option, 3-way and 4-way will not work on this Board.

2-2 way bridges? just for looks?
 

 
Yep....
 

They REALLY should make a double width 2 way bridge! xD
 

hope the necro isnt in bad taste on this post... i followed a link from the pro sli page and read the whole thread through. im still not certain there is an appropriate bridge that i can use on my 770 classifieds... 
 
im a micro-atx plat-former and will have 2 way sli soon, double width cards with no spacing. from what i gathered at the end of the thread it is permissible to use the 3 way bridge for 2 cards but the product page indicates that 2 way usage for the 2/3way bridge is intended for double width double space. could someone in the know please clarify whether the 2/3 way bridge will accommodate 2 way sli for double width/ no space? if it is permissible should i make sure the top/ middle connections are used or does it not make any difference...
 
ps first post... i think
 
EDIT:
 
so i wasnt familiar enough with the message board to realize that the page count caps out 5 pages above your initial link... i finished reading the thread: (backwards from my post) and realized that it was confirmed that 40mm spacing was acceptable for double width no gap layouts... if anyone happens to come across this post, it would be nice to know beforehand if there is any directive towards a primary sli connector or not with these bridges... basically im asking if it matters whether the extra sli connection hangs below the lower card or if i have to have it sticking up towards the cpu, (there are no physical constraints for this in my case as both directions are free of obstruction.)
 
EDIT #2:
 
avie above this post: rogue helmet on ghost town... awesome map 

The 2 way will fit 60mm spacing and the 2-3 way 80mm spacing.  The 2-3 way will also fit 40mm spacing but it will hang off one of the cards.  The double width cards with no spacing is 40mm I believe. If there is a question if one will fit you can measure the distance from one slot to the other. Hope this helps.
 
Post #151 has a picture with the 2-3 way extending upwards. It is one of the EVGA guys systems, so it should work.  Should work hanging down as well. Don't think I can link yet.