wlee1124

Sorry for the stupid question, I have the Asus ROG Maximus VI Hero,
Current I am running two way SLI with 760s,
I want to get the EVGA pro sli brigde, but I don't if I should get the three way or two way SLI,

Some input would be great!

You need to measure the distance between the fingers. If it is 60mm you need the 2 way, 40 or 80 and you can get the 3 way.  BTW your rear fan should be exhausting 

nevermind, they just updated the page, I guess the LED doesn't support the 760,
It used to say the LED supports 700s series cards.
 

CAxVIPER

wlee1124

Sorry for the stupid question, I have the Asus ROG Maximus VI Hero,
Current I am running two way SLI with 760s,
I want to get the EVGA pro sli brigde, but I don't if I should get the three way or two way SLI,

Some input would be great!

You need to measure the distance between the fingers. If it is 60mm you need the 2 way, 40 or 80 and you can get the 3 way.  BTW your rear fan should be exhausting 

 
I bought my 760s because it said 700 series :|
 
I guess it is either time to ask for a refund or mod it to run off AA batteries. 

Are you serious!? Oh hellz No!

EVGA_JacobF

bcavnaugh

EVGA_JacobF

It should work, what is the exact issue?

I have my cards in Slot 1 (next to the CPU) and the 2nd card in 3rd Slot the bridge is about 2 CM sort.
The space between each SLI Port is about 6 CM. Thanks for looking, Bill

 

Images don't seem to work...

Strange, I don't see why it doesnt work. From connector to connector it should be 60mm. That should be enough for the 2-way bridge.

I went with the 2/3 not the 2 way. see http://forums.evga.com/fb.ashx?m=1999944
Sorry if I messed up Jacob

Viper97

bcavnaugh

EVGA_JacobF

bcavnaugh
For the X79 Dark and two Titan Hydo's which bridge should I get the 2 Way or the 2/3 way bridge? Thanks Bill

I would go the 2/3 Way!

FYI
The EVGA Pro SLI Bridge at least the 2/3 Way Bridge will not work on the X79 Dark MB with Two EVGA GeForce GTX TITAN Hydro Copper Signature in the two 16x Slots number 1 and 3.
What a real Bummer, wonder if I can get a refund? Bill

While I don't have Titans I have 2-670's in the same slots you identified.  I find no problem with the SLI bridge.  Is it that the bridge doesn't fit or just isn't functioning with the Titans?

It is a 40mm and for a single 2-Way on the Dark is 60mm so from what I have read the 2 Way would work for my current 2-Way but then they are out of stock and then when I do go 3-Way the 3-Way I have will still not work in my current setup. I will have to change Slots where I have the cards installed. That would also cause be to buy new Water Bridges as well. It is to bad EVGA did not make Water Bridges for their Hydro Copper Water Blocks.

hmm dows the 780 classy work with the dual sli bridge?
 
The design of the Bridge is very cool :D

Darn I just bought another GTX 660 SC from you guys, it would've been cool if it lighted up on my dual GTX 660 Setup. Im not really for getting brand new, expensive stuff like the 770+ and 670+ since I have a low budget, but these SLI bridges intrigue me! They look very sleek and nice, and no more bending of those old SLI bridges when GPUs are close to each other. nice and clean, Looks awesome.
 
you should be able to change the SLI bridge color too ;)

bcavnaugh

EVGA_JacobF

It should work, what is the exact issue?

I have my cards in Slot 1 (next to the CPU) and the 2nd card in 3rd Slot the bridge is about 2 CM sort.
The space between each SLI Port is about 6 CM. Thanks for looking, Bill

Are your SLI fittings changing the card spacing? Its very possible for that to happen! I would loose the fitting up to get some play, install the bridge and snug the fittings back up and check for leaks.

I got the 2-way 3- way & the four way, but you are out of luck if you are running two GTX 690s on a board that is set up for PCI-E (1) - (3) - (2)