For one slot you will need the 2-way bridge, like below:
 

exilelrrp

vtruong84

Just curious if this SLI bridge will work with the Asrock Z87 extreme6?  There's an awkward amount of space between the 1st PCIe slot and 2nd.

I might be changing to the Asus Z87 Pro so can you let me know the compatibility on that one too?  Thanks

I believe a 3-way Sli Pro will work on That Asrock Z87 space you have there, I have the same space on my MSI Mobo Sli setup, same goes for that Asus Z87, basically 2 slot space between cards.

 
The Asrock extreme4 looks to be the normal 2 slot spacing but the extreme6 has that mini-PCIe AC module... that's kind of why I thought the spacing was awkward.  Just wanted some confirmation though - if it fits the Asus then that makes my decision a lot easier :)  Thanks man!

^^ Jacob- Can you clarify if the 2 way sli bridge would seat onto the fingers if I have my x-fi card seated in between the cards in the PCI-e 1x slot? I am looking and the pcb board on the x-fi is flushe with the pcb boards on the Titans. I just want to make sure the x-fi will not keep the bridge from seating flush onto the fingers?

Islandborn

^^ Jacob- Can you clarify if the 2 way sli bridge would seat onto the fingers if I have my x-fi card seated in between the cards in the PCI-e 1x slot? I am looking and the pcb board on the x-fi is flushe with the pcb boards on the Titans. I just want to make sure the x-fi will not keep the bridge from seating flush onto the fingers?

As long as it isn't any taller it will be fine 

Yes it will be fine.

Islandborn

^^ Jacob- Can you clarify if the 2 way sli bridge would seat onto the fingers if I have my x-fi card seated in between the cards in the PCI-e 1x slot? I am looking and the pcb board on the x-fi is flushe with the pcb boards on the Titans. I just want to make sure the x-fi will not keep the bridge from seating flush onto the fingers?

a picture of your setup can clarify your confusion.

vtruong84

exilelrrp

vtruong84

Just curious if this SLI bridge will work with the Asrock Z87 extreme6?  There's an awkward amount of space between the 1st PCIe slot and 2nd.

I might be changing to the Asus Z87 Pro so can you let me know the compatibility on that one too?  Thanks

I believe a 3-way Sli Pro will work on That Asrock Z87 space you have there, I have the same space on my MSI Mobo Sli setup, same goes for that Asus Z87, basically 2 slot space between cards.

The Asrock extreme4 looks to be the normal 2 slot spacing but the extreme6 has that mini-PCIe AC module... that's kind of why I thought the spacing was awkward.  Just wanted some confirmation though - if it fits the Asus then that makes my decision a lot easier :)  Thanks man!

No problem, that Asus Z87 is a nice looking Mobo.

jacob can you clarify if two, 2 way sli bridges will fit side by side. i know 2 aren't needed but i prefer that look.

I double checked and yes it fits.

Here's a picture of my setup. Would you just suggest a 2way or the 3/2way?