iamSneaky
Yes anyone who wants engraving done, just let me know and get Nate to post them off to me.
Just keep in mind I am in Australia so you will have postage to pay from Nate to me, then
postage back to you plus engraving cost.
 

I haven't cut a corner yet in my build and don't want to start now. Nate's stuff looks top notch and your top notch engraving is the only suitable finish. Once the blocks are close to completion we'll sort out some details and payments Sneaky.

bluvert89
Looks great, can't wait to get mine in.  Had a question on your setup Matt.  Noticed a couple things when test fitting some stuff on my dark 1) Does your I/O cover touch your backplate and 2) Did your mounting hardware(specifically the bottom right screw) rub against the socket lever?  I have an EK cpu block so might just be an issue with it.

I was drooling over this thread today and noticed this post. If you still have issues with I/O and backplates, I have a simple fix. Using a dremel or tin snip, cut the bottom edge of the I/O cover, apply some u-channel molding. The lower screw hole will be gone, but the u-channel will friction hold the cover in place. If you worry about movement, Use a small square of 3M 4010 double sided tape on the side of the small I/O USB box that the cover can touch.
 

Mark is all square with the house.  2 more open slots and the batch gets started!  Shoot me a PM and your in.

Two to go. Come on peeps you know you want it. Let's get this show on the road. Send in that deposit! :D

iamSneaky
Yes anyone who wants engraving done, just let me know and get Nate to post them off to me.
Just keep in mind I am in Australia so you will have postage to pay from Nate to me, then
postage back to you plus engraving cost.
 

Man those look nice. Unfortunately the postage is probably prohibitive to the US.

Hello,
I'm interested in purchasing both of these blocks. Nate, I sent you an email as I don't have enough posts on this forum yet to send a pm.

Welcome to the forums!  Your in.  While the EVGA community will happily benefit new members, you don't have to sign up on my behalf :)  my e-mail is in the bottom of my signature.

Haha yea I should have signed up a long time ago as I've been using EVGA stuff for years but this is the first time I've had trouble finding blocks for a mobo and yours are certainly worth a forum signup!

yes, you should have!  shame on you!  but good to have you aboard ;) 
ONE more body now...

Any takers?