You bet. 

ALL: Check your PM's.  I have enough folks to start the batch, and I have sent PM's.  I have to be away at the end of the month, so I am going to press hard to get these done... but that requires the deposits for me to get the raw material.  First deposits get the slots, so if anyone out there is still interested feel free to PM, or e-mail me. 

I have been tied up with other things I needed the comp for as well as other things getting in the way with my clocking, but, for all who are interested, after an hour of IBT on Max load, my VRM never got above 35c, watched with EleetX, in general its just runs cool. 
 
Figured I would throw this in here for others wondering how Nates blocks do in the real world.
 
Things are letting up a bit so I should be able to start doing some clocking again soon, and get some more temps then.

Hi Guys,
This week I finally assembled the hardware on my Banchetto101 for Tests
You can see it here (sorry it's in Italian, but I will make a short version in English): 
http://www.tomshw.it/forum/worklog/360910-project-900d-extreme-power.html
 
Some Pictures:
           
 
HARDWARE
 
Case:                   MicroCool Banchetto 101 - Black Acrylic
Mobo:                  EVGA X79 Dark
Procio:                 Intel Core i7-4960X Processor Extreme Edition (15M Cache, up to 4.00GHz)
RAM:                   CORSAIR Dominator Platinum 64GB (8 x 8GB; 2133, 9-11-11-31, 1,65V)
VGA:                   EVGA GTX 780 Ti KingPin Edition (2 SLI) (4 SLI Coming Soon ?)
HDD:                   Wester Digital HDD 1TB Velociraptor [WD1000DHTZ]
SSD:                   Samsung SSD 840 PRO 512 [GBMZ-7PD512]
PSU:                   Lepa G-Series 1600 (Waiting for new EVGA PSU 1550W?)
Optical Driver:     Silverstone SST-SOB02 Blu-ray - Slot In
CPU Cooler:         Swiftech H320 (will be converted to true watercool system in 900D)
Fans:                 Enermax T.B. Apollish UCTA14N-R Fan 140mm - red
Thermal Paste:    Gelid GC-Extreme
 
By Mod-A-TEAM  Member
 

What does the above post have to do with the water blocks in this thread?

I'm waiting for the water blocks for that X79 Dark!

Ah I see. Nice system.

Ok, I hope you don't mind I just went ahead and emailed you Nate.
 
Is Sneaky taking any customers for the engraving and resin work?

I only sent 1 to sneaky, but if you want I can send yours to him as well. 
 
Were in the middle of a race.  The Dark blocks, vs the Xtreme11 blocks.  which ever batch gets the deposits in first gets to go first. 

Yes anyone who wants engraving done, just let me know and get Nate to post them off to me.
Just keep in mind I am in Australia so you will have postage to pay from Nate to me, then
postage back to you plus engraving cost.