How do we go about penciling and then penning :P

Pencil is your request, pen is the raw materials deposit.  That simple.

So far I have penciled in:
Chipset & Vreg
stren, LucaJ, zoom314, markistheone, GaidenTiger, & Bludge.
 
If you guys are still onboard, PM me or e-mail me your paypal info and I will get the pen out.
 
I have 2 openings for single VREGS if someone wants in on those.  Meanwhile I will be sending out invoices for the current batch this week.

Hi nateman, here are the 2 pm, I'm at work, in the evening I post you my info

The VReg Seems to stay about 3~4c over the system temp even as I have OC Scanner X's CPU burner running for a bit. Keep in mind that I am running 4x GTX 480s as well as I have it at the end of the chain of blocks, chipset->CPU->VReg, before the radiators and reservoir. The sensor in my reservoir is showing 30c as well and the MB says system temp is 34c
 
For comparison with other loops I am running in the loop:

• Nate's chipset block
• Swiftech Apogee HD CPU block
• Nate's Vreg Block
• Hardware Labs SR-1 120mm radiator
• Hardware Labs SR-1 360 radoator
• Blacknoise Technology Noiseblocker M12-1 in push/pull config on all radiators
• Koolance RP-452X2 Dual 5.25in Reservoir
• Swiftech MCP655-B pump
• XSPC 10K temperature sensor in the reservoir
• XSPC 1/2" HighFlex Hose
• Phoyba temperature sensor on each radiator (still cabling so not hooked up yet)
• Morning and running with a Lamptron FC5 v3

With some more aggressive fans and radiators as well as a larger reservoir you can probably get everything cooler. I went with this setup for maximizing the use of my space and not annoying my wife with loud fans on the radiators.  On a side note, After running it I would probably have gone with a little more aggressive fans that are a little louder as now the loudest thing in the case is my SuperNova 1500w and I can barely hear that.
 
 

 
Poking some holes. 

Chipsets are done...
Still working on the Vregs though:

 

 

Very nice.  Every time I see those chipset blocks I wish I had ordered one with the vreg.  Might have to get on the next list..

Not to late to get on the next batch. 

All the invoices went out.  Blocks are done! 
Please make sure to send me a current address in a PM.