Did my new Seasonic 750 cables. This was my first go at doing a complete PSU. I have done some smaller sleeving projects in the past, but only a couple fans or whatnot. For this upcoming build, I wanted it to have a much more refined and professional look, so I decided to go all out on the cabling. The fully modular Seasonic cables makes it a bit cleaner, imho. I don't have any good pictures of the 24, 8 or PCIE cables done, they are in a temp box running ATM. I do have a couple pix of the front panel cables. The PSU was done using the same non-heat shrink like in this guide. (great guide btw). The others, I had to use heat shrink. Here's how they look. Before eliminating the AC97 plug and sleeving. (BTW, I know there is a good bit of heat shrink on the audio plug...that was intended because where and how It will be routed.)
Done.
More front panel cables finished.
Here is a spare 4pin power I did as a test piece and some of the cables done and installed in my temp setup. Sorry for the less than stellar pictures but only got my phone. The sleeved cables are miles ahead of the stockers in appearance, imho. Can't wait to get my new case back from the stripper and get started on this project. Fractal Design XL Ivy Bridge Build. Should be nice.
I know there is a bare red and one black wire there. They are a couple of the doubles. I needed to make a splice but didn't get to it yet. It will be fixed before the final build.
