TigerDeath

Xtremed

TigerDeath

I've got a new rig posted on my modrigs page (here's a link: http://www.modsrigs.com/detail.aspx?BuildID=32705 ) and would appreciate any comments/suggestions/+1's you can give me (and will return the favor to those that do for me)!

Also posted a thread here about my build, why it came about, how I got some of the parts, and some additional pictures (including my "lapping the heatsink" pictures!): http://forums.evga.com...px?m=1978065&high=

I haven't made it through all several-hundred of you guys, but I have gotten everyone back that has gotten me on the list!
Thanks guys!
-TigerDeath

Left you, a +1, also i think you can work in your OC. Enjoy your rig

Thanks man! I already replied to your comments and returned the favor before you even posted this. LOL!

 
No problem if you need any help with the OC feel free to wrote me a PM, i had that same MB just before my RIFV

Updated my pics in my modsrigs (i'm not in the list though):)..
hoping that people will like, i will go give some of the other rigs some +1's too :) 

IstBarP

Updated my pics in my modsrigs (i'm not in the list though):)..
hoping that people will like, i will go give some of the other rigs some +1's too :) 

 
Fixed you up bro! :)

TigerDeath

IstBarP

Updated my pics in my modsrigs (i'm not in the list though):)..
hoping that people will like, i will go give some of the other rigs some +1's too :) 

Fixed you up bro! :)

Right back at you! :).. 

Here's some pics to the heatsink (going to link from ModRigs too).
 
http://www.ak907.net/wp-c.../2013/07/Heatsink1.jpg  <-- This picture was mid-way through the process after a check. I saw some pretty deep pits and decided to start over on the 600 grit again.  30 strokes, each direction, 3 times (30X4X3=360 strokes on each grit) and i finally got it down.
http://www.ak907.net/wp-c.../2013/07/Heatsink2.jpg <-- One of my favorite high-res pics of the sheen I got on the heatsink. I actually used a piece of marble for the flat surface, a small piece of micro-fiber for a soft cushion under, a piece of paper (heavier quality, smooth), and either some type of polishing compound or what I used which was some thermal compound. Spread a small thin layer on the paper after you tape it all to the marble and rubb-a-dubb-dubb.
http://www.ak907.net/wp-c.../2013/07/Heatsink3.jpg
http://www.ak907.net/wp-c.../2013/07/Heatsink4.jpg
http://www.ak907.net/wp-c.../2013/07/Heatsink5.jpg
http://www.ak907.net/wp-c...eatsinkandRadiator.jpg
http://www.ak907.net/wp-c...07/Heatsink-Before.jpg

TigerDeath

Here's some pics to the heatsink (going to link from ModRigs too).

http://www.ak907.net/wp-c.../2013/07/Heatsink1.jpg  <-- This picture was mid-way through the process after a check. I saw some pretty deep pits and decided to start over on the 600 grit again.  30 strokes, each direction, 3 times (30X4X3=360 strokes on each grit) and i finally got it down.
http://www.ak907.net/wp-c.../2013/07/Heatsink2.jpg <-- One of my favorite high-res pics of the sheen I got on the heatsink. I actually used a piece of marble for the flat surface, a small piece of micro-fiber for a soft cushion under, a piece of paper (heavier quality, smooth), and either some type of polishing compound or what I used which was some thermal compound. Spread a small thin layer on the paper after you tape it all to the marble and rubb-a-dubb-dubb.
http://www.ak907.net/wp-c.../2013/07/Heatsink3.jpg
http://www.ak907.net/wp-c.../2013/07/Heatsink4.jpg
http://www.ak907.net/wp-c.../2013/07/Heatsink5.jpg
http://www.ak907.net/wp-c...eatsinkandRadiator.jpg
http://www.ak907.net/wp-c...07/Heatsink-Before.jpg

How did it affect your temps? :)

IstBarP

TigerDeath

Here's some pics to the heatsink (going to link from ModRigs too).

http://www.ak907.net/wp-c.../2013/07/Heatsink1.jpg  <-- This picture was mid-way through the process after a check. I saw some pretty deep pits and decided to start over on the 600 grit again.  30 strokes, each direction, 3 times (30X4X3=360 strokes on each grit) and i finally got it down.
http://www.ak907.net/wp-c.../2013/07/Heatsink2.jpg <-- One of my favorite high-res pics of the sheen I got on the heatsink. I actually used a piece of marble for the flat surface, a small piece of micro-fiber for a soft cushion under, a piece of paper (heavier quality, smooth), and either some type of polishing compound or what I used which was some thermal compound. Spread a small thin layer on the paper after you tape it all to the marble and rubb-a-dubb-dubb.
http://www.ak907.net/wp-c.../2013/07/Heatsink3.jpg
http://www.ak907.net/wp-c.../2013/07/Heatsink4.jpg
http://www.ak907.net/wp-c.../2013/07/Heatsink5.jpg
http://www.ak907.net/wp-c...eatsinkandRadiator.jpg
http://www.ak907.net/wp-c...07/Heatsink-Before.jpg

How did it affect your temps? :)

Check the modrigs page: http://www.modsrigs.com/detail.aspx?buildid=32705
 
I posted the temps info there.
 

TigerDeath & IstBarP have been added to my MR +1 List on Page 30 of this thread:
http://forums.evga.com/fb.ashx?m=1588237
 
I have left you two a +1 and a comment too, please feel free to do that for the other participants of the list

Page one updated. Bout to go through and catch up, not sure where I left off at but I will get ya.
 
Thanks again GL for keeping this going!

 http://www.modsrigs.com/detail.aspx?BuildID=32522
 
I recently built a new system, going from an I7-920 to an I7-4770k Haswell and I love it. One problem though, even though I have the new system on Modsrigs I've only been able to upload 1 photo.
 
Every time I upload a photo, it disappears when I click "save" and no matter the size, the browser, or the format, I can't get any other images saved. I've tried from home, work, a friend's pc, and nothing.
 
Any ideas on why I can't get more pics uploaded?