• EVGA MODS RIGS
  • ***MODS RIGS, Get your +1 Here! (PLEASE READ 1st POST!- Updated 6/27/2016*** (p.176)
2013/01/13 21:05:02
w4ss4b3
Older pics of rig 
Intelligent esCo                       -http://forums.evga.com...=1541662&high=esCo 
esCo's Intelligent Water Park - http://forums.evga.com...=1580504&high=esCo  
 Can't seem to find my AMD builds but above is the entire process of what this current rig has gone through. A big thanks to EVGA for helping me with my 660 purchase/rma.  
  
http://www.modsrigs.com/detail.aspx?BuildID=31164 
So as some know I recently made the switch from AMD over to intel. And I am still till' this day loving that decision. Anyhow my rig needed some upgrades. I jumped from video card to video card, different cooling, and now I finally got my hands on a couple of SSD's. They are the old OCZ Vertex 2 models but they are still faster then my previous HDD which is now just a back up of my C drive from before the SSD install. As for my video cards, I started off with a 560, had 2 560s in sli for a very short time, a 450, then a 480 which was watercooled for most of the time I had it and now I am using a 660 FTW Sig 2 3g model and I am loving it. My room temperature is noticeably lower then it was with the 480 even while it was watercooled. As for the cooling I went from a stock HSF to a corsair h60(had troubles with the purchase not the product and had to exchange it several times due to missing items), I then went to an XSPC custom loop while using my 560 still. I then got the 480 + waterblock for the 480 so I had the cpu under water and the 480 under water(made a difference in gpu temp but not so much room temp, a lot of heat was still building up inside the case being pushed out of my case), and now since I am no longer water cooling a video card I down graded my cooling for the XSPC Raystorm, 120MM triple rad, and rasa kit to a Corsair H70. It has been fun being able to upgrade my computer as I have. Grant it most of the items are second hand used but still working as new.  
  
A special thanks to EG91 for an amazing deal on the i5-2550k chip and the Asus P8Z68-V Gen 3 board I am using. And a very special thanks to randolla for giving me probably the best gift/deal yet with the Corsair HX1000.  
  

Onto the upgraded Intelligent esCo 2.0 now. 
System specs -  
Processor      - i5-2550k 
Motherboard - Asus P8Z68-V Gen 3 
SSD               - Intel 520 180g (Boot drive + 3 games)   
SSD               - Intel 520 60g (Coming soon courtesy to evga)    
HDD              - Seagate Baracuda 150g(Games) 
HDD              - Seagate Baracuda 500g 7200RPM(Storage and Back up of C Drive) 
Memory         - G.Skill 8g 2x4g DDR3 1600Mhz 8-8-8-24 
Video             - EVGA GTX 660 FTW Sig 2 3g model 
Cooling          - Corsair H70 
PSU               - Corsair HX1000  
Case             - Cooler Master Haf 912  
Mouse           - Logitech G400 
 
 


  
And I have now completed my high end gaming rig............................................... for now... =D  
2013/01/13 22:57:17
Gold Leader
@ esCob4r
 
Very nice system you got there!!!
 
For that I left you a +1 and a comment and I also added you to my MR +1 list here on page 30 of this topic:
http://forums.evga.com/fb.ashx?m=1588237
 
Welcome aboard, please feel free to give all the other 305 participants a +1 and a comment, so they know who gave them the +1
2013/01/14 02:23:27
buggyruth
esCob4r

Many many changes now through out my rig. Give it a whirl. I will +1 those who +1 me

http://forums.evga.com/tm.aspx?m=1822337
http://www.modsrigs.com/detail.aspx?BuildID=31164
Going to run me a benchmark soon before I go to bed to see if my scores may be better or not. 

 
+1 for you! Nice clean build
2013/01/14 03:35:37
Gold Leader
Cloudz00x

Finally finished the Super Cobra 5.0 Rig.
Pictures are up on my build log and the few I selected for the Mods rigs page.
Add me and I will also make sure to go through everyone's rig (that's a lot of rigs) and +1 them

Super Cobra 5.0:
http://www.modsrigs.com/detail.aspx?buildid=30803


Build Log (For more pictures, Finished build pictures on Page 4):
http://forums.evga.com/tm.aspx?m=1748657

Hey man, sorry for not seeing that I have added you to te list yet, So sorry for that :X
It's because I had it rather busy with my own Descent league Descent Task Force, but that all has been solved last night :) I hosted 5 7 to 8 player games heh, we have never been this active in months time!
 
Click to Enter xD
I had to do lots of administration there and I also was needed to fix and clean some things up hehe 

Anyhow here you go:
http://forums.evga.com/fb.ashx?m=1588237
2013/01/14 09:36:28
w4ss4b3
Gold Leader

@ esCob4r

Very nice system you got there!!!

For that I left you a +1 and a comment and I also added you to my MR +1 list here on page 30 of this topic:
http://forums.evga.com/fb.ashx?m=1588237

Welcome aboard, please feel free to give all the other 305 participants a +1 and a comment, so they know who gave them the +1

 
Thanks. Been trying to +1 everyone I can. Im getting there slowly but surely. 
 
Also just so you know. You already had me on the list at #91 but that link doesn't bring you to my modsrig. Brings you to the top systems it appears. http://www.modsrigs.com/systems.aspx
2013/01/14 10:31:08
SmashBot
I need to get onboard =)
2013/01/14 15:15:00
RushXTC
esCob4r

Gold Leader

@ esCob4r

Very nice system you got there!!!

For that I left you a +1 and a comment and I also added you to my MR +1 list here on page 30 of this topic:
http://forums.evga.com/fb.ashx?m=1588237

Welcome aboard, please feel free to give all the other 305 participants a +1 and a comment, so they know who gave them the +1


Thanks. Been trying to +1 everyone I can. Im getting there slowly but surely. 

Also just so you know. You already had me on the list at #91 but that link doesn't bring you to my modsrig. Brings you to the top systems it appears. http://www.modsrigs.com/systems.aspx

 
You said you updated 
Intelligent esCo into  Intelligent esCo 2.0 right?  
Did you delete the first modsrig? If so, That's why it's no longer valid.
2013/01/14 15:26:27
Violence.
i beleive im all caught up. still finding a few i havent given +1 yet. 
 
havent changed much on mine. but did manage some new bench scores and a beast of a validation for my 3770k
2013/01/14 15:49:49
w4ss4b3
RushXTC

esCob4r

Gold Leader

@ esCob4r

Very nice system you got there!!!

For that I left you a +1 and a comment and I also added you to my MR +1 list here on page 30 of this topic:
http://forums.evga.com/fb.ashx?m=1588237

Welcome aboard, please feel free to give all the other 305 participants a +1 and a comment, so they know who gave them the +1


Thanks. Been trying to +1 everyone I can. Im getting there slowly but surely. 

Also just so you know. You already had me on the list at #91 but that link doesn't bring you to my modsrig. Brings you to the top systems it appears. http://www.modsrigs.com/systems.aspx


You said you updated 
Intelligent esCo into  Intelligent esCo 2.0 right?  
Did you delete the first modsrig? If so, That's why it's no longer valid.

Yah after I created the new thing in mods rig I saw I had like 5 or 6 other rigs showing up and since I either no longer have those or updated them into my current rig I deleted them. I think all I have is the posts I made of them on here now.
 
I kind of miss how it looked with the XSPC water loop. Just seemed to much for me to worry about then when it came to cleaning my rig or moving it. I couldn't put it on its side or anything if need be.  
2013/01/14 15:56:41
w4ss4b3
malVizio

Gold Leader

ahhh nice SLI bridge Connector you have there malVizo! I would remove that bar code sticker thingie on it, looks a bit distracting that way xDDDD

So it's like mine, which you can see in my sig

@ cloudz00x

Could you run me a BarsWF x64 CUDA Client on that setup of yours please?
You can post your results here and also read what needs to be done 
http://forums.evga.com/fb.ashx?m=1834872 

yeah i will remove... btw i don't like it very much...but looks like eu shop don't have atm!
really amazing that rig cloudz!

 
I put an evga badge sticker in the middle of my AsRock SLI bridge when I was using 2x 560s. Looks pretty cool, now I just need to get another 660 so I can use it again. 

Use My Existing Forum Account

Use My Social Media Account