its not stable as when i run linpack 20000 process for 3 runs my computer locks up and I get a bsod about 30 seconds in i am new to all this core i7 overcloking and have no idea if my setting are correct so far i know I need to raise my core volts but other then that have no idea if I need to change anything else plz help
Mother Board ( EVGA X58 Classified E-760 )
Bios ( S61J )
CPU ( 960 DO)
CPU Cooler ( Prolimatech Mega Shadow )
Memory ( Corsair Dominator GT 1600 7 7 7 20 )
PSU ( Thermaltake 1000w)
GPU ( GTX 295 Co-op )
Drivers ( 195.81 )
Operating System ( Windows 7 x64 Ultimate )
Frequency Control
CPU Clock Ratio ( 24x )
CPU Host Frequency (Mhz) ( 175 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( Auto )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 101 )
Memory Feature
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 20 )
tRFC Setting ( Auto )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( 1.3500v)
CPU VTT Voltage ( Auto )
CPU PLL VCore ( Auto )
**IOH PLL VCore ( Auto )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( Auto)
QPI PLL VCore ( Auto )
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )
**VTT PWM Frequency ( 250 KHZ )
**CPU PWM Frequency ( 800 KHZ )
**CPU Impedance ( Auto )
**QPI Signal Compensation ( Auto )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Enabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 GT/s )
OC Recovery ( Enabled )
PnP/PCI PCI Express
Maximum Payload Size ( 2048 )
Power Management Setup
ACPI Suspend Type ( S3 )
HPET Support ( Enabled )
HPET Mode ( 64-bit )
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Lvcoyote
CLASSIFIED Member
- Total Posts : 3042
- Reward points : 0
- Joined: 2008/08/09 11:29:45
- Location: Omak, WA
- Status: offline
- Ribbons : 8
Re:help me overclock my classified plz
2009/12/19 10:30:48
(permalink)
Try setting the memory frequency to 2:8
ASUS Maximus VI Impact, i7-4770K, G.Skill TridentX 2X8Gb DDR3-2400, EVGA GTX 750 Ti, EVGA Hadron Hydro w/EVGA Hadron Hydro Water Cooling Kit, Samsung 840 EVO 500 Gb SSD, WD Caviar 500 Gb HDD, Panasonic UJ8C5 Slot Load DVD Burner, Windows 8.1 Pro X64/Linux Mint 16 X64 HEATWARE
|
Lvcoyote
CLASSIFIED Member
- Total Posts : 3042
- Reward points : 0
- Joined: 2008/08/09 11:29:45
- Location: Omak, WA
- Status: offline
- Ribbons : 8
Re:help me overclock my classified plz
2009/12/19 10:32:01
(permalink)
ASUS Maximus VI Impact, i7-4770K, G.Skill TridentX 2X8Gb DDR3-2400, EVGA GTX 750 Ti, EVGA Hadron Hydro w/EVGA Hadron Hydro Water Cooling Kit, Samsung 840 EVO 500 Gb SSD, WD Caviar 500 Gb HDD, Panasonic UJ8C5 Slot Load DVD Burner, Windows 8.1 Pro X64/Linux Mint 16 X64 HEATWARE
|
Re:help me overclock my classified plz
2009/12/19 10:54:02
(permalink)
ok I did what u siad and this is what I have it at now I had to riase the cpu volts as it would lock up on me at the windows start up logo i am going to test it with linpack to see what happens let me know if I should change something now that i rasied my cpu vlots thanks for the help by the way
Mother Board ( EVGA X58 Classified E-760 )
Bios ( S61J )
CPU ( 960 DO)
CPU Cooler ( Prolimatech Mega Shadow )
Memory ( Corsair Dominator GT 1600 7 7 7 20 )
PSU ( Thermaltake 1000w)
GPU ( GTX 295 Co-op )
Drivers ( 195.81 )
Operating System ( Windows 7 x64 Ultimate )
Frequency Control
CPU Clock Ratio ( 24x )
CPU Host Frequency (Mhz) ( 175 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( Auto )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 101 )
Memory Feature
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 1067 / 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 20 )
tRFC Setting ( Auto )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( 1.39375v)
CPU VTT Voltage ( +100 mV )
CPU PLL VCore ( Auto )
**IOH PLL VCore ( Auto )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( Auto)
QPI PLL VCore ( Auto )
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )
**VTT PWM Frequency ( 250 KHZ )
**CPU PWM Frequency ( 800 KHZ )
**CPU Impedance ( Auto )
**QPI Signal Compensation ( Auto )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Enabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 GT/s )
OC Recovery ( Enabled )
PnP/PCI PCI Express
Maximum Payload Size ( 2048 )
Power Management Setup
ACPI Suspend Type ( S3 )
HPET Support ( Enabled )
HPET Mode ( 64-bit )
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/19 11:07:09
(permalink)
ok this is where I am at now and I keep getting the bosd 101 and 124
CPU VCore ( 1.40000v)
CPU VTT Voltage ( +150 mV )
any suggestions ? ?
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/19 11:22:07
(permalink)
CPU: Intel i7 980 @ 4.60 Gzh Mobo: Msi Big Bang Xpower Ram: 12 GB Patriot Viper 2000 MZH 10-11-10-28-1T Hard Drive: 2x Seagate Baracuda 1TB 7200.12 in Raid 0 GPU: 3x EVGA GTX 580 in Tri-SLi Sound Card: Soundblaster X-Fi Titanium HD Case: Coolermaster HAF 932 wit 240MM Rad Push/Pull Water Loop Power Supply: Corsair AX1200 80 Plus Gold Certified 3Dmark 11: 17187 We Are Intel! Pom! Pom! Pom! Pom! Sponsors Of Tomorow.
|
Re:help me overclock my classified plz
2009/12/19 17:51:18
(permalink)
ok I have spent the whole day trying ti get my new core i7 960 stable but I can't I need someone help badly plz
Mother Board ( EVGA X58 Classified E-760 )
Bios ( S61J )
CPU ( 960 DO)
CPU Cooler ( Prolimatech Mega Shadow )
Memory ( Corsair Dominator GT 1600 7 7 7 20 )
PSU ( Thermaltake 1000w)
GPU ( GTX 295 Co-op )
Drivers ( 195.81 )
Operating System ( Windows 7 x64 Ultimate )
Frequency Control
CPU Clock Ratio ( 24x )
CPU Host Frequency (Mhz) ( 167 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( Auto )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 101 )
Memory Feature
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 1067 / 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( 2G )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 20 )
tRFC Setting ( Auto )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( 1.33750)
CPU VTT Voltage ( +100 mV )
CPU PLL VCore ( Auto )
**IOH PLL VCore ( Auto )
DIMM Voltage ( 1.61 )
DIMM DQ Vref ( Auto)
QPI PLL VCore ( Auto )
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )
**VTT PWM Frequency ( 250 KHZ )
**CPU PWM Frequency ( 800 KHZ )
**CPU Impedance ( Auto )
**QPI Signal Compensation ( Auto )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Enabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 GT/s )
OC Recovery ( Enabled )
PnP/PCI PCI Express
Maximum Payload Size ( 128 )
Power Management Setup
ACPI Suspend Type ( S3 )
HPET Support ( Enabled )
HPET Mode ( 64-bit )
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: offline
- Ribbons : 10
Re:help me overclock my classified plz
2009/12/19 17:57:51
(permalink)
DIMM Voltage ( 1.61 ) Why 1.61? Did you have it stable before you started over clocking?
|
Re:help me overclock my classified plz
2009/12/19 18:01:00
(permalink)
yea its stable I know this as i ran 30 runs of linx at 20000 and ran memorytest x86 for 2 hous at stock setting and its perfect at that setting
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/19 18:03:51
(permalink)
someone care to plz help me ????? as I am going crazy
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: offline
- Ribbons : 10
Re:help me overclock my classified plz
2009/12/19 18:05:43
(permalink)
So you are saying your memory worked fine with 1.61v setting running at rated speed? (1600/2:12) nothing over clocked?
|
badfastbusa
Superclocked Member
- Total Posts : 137
- Reward points : 0
- Joined: 2009/12/14 08:32:36
- Location: Atoka Oklahoma USA
- Status: offline
- Ribbons : 0
Re:help me overclock my classified plz
2009/12/19 18:10:11
(permalink)
First of all, are you just trying to get 4ghz stable? Try this...up your DIMM voltage to 1.65 then try 191 for your BLCK and 21x on your cpu multiplier... Keep your volts right where they are and lets see if you can get it fairly stable and we will go from there.
CPU
i7-920 D0 4623mhz 1.43v
CPU cooling
TRUE
MOBO
Classy E760 (S61J)
Memory
3x2gb G.Skill 2000mhz
GPU
XFX 5870
HDD
OCZ Vertex SSD 60GB / Seagate 500GB
Sound
AuzenTech Forte 7.1 / Audio Technica AD700
PSU
Corsair 850TX
Case
Antec 1200
OS
Win 7 Ult 64bit
Monitor
24"Acer/20"Acer
|
Re:help me overclock my classified plz
2009/12/19 18:14:13
(permalink)
awalleyeguy
So you are saying your memory worked fine with 1.61v setting running at rated speed? (1600/2:12) nothing over clocked?
yep thats right
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/19 18:17:29
(permalink)
what I really want as my overclock is 4.2 gigs
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: offline
- Ribbons : 10
Re:help me overclock my classified plz
2009/12/19 18:24:53
(permalink)
I think the best way is to see how far you can go on auto voltage on everything except ram, set to MFR specs, and 2:8. The wrong way to go is simply set voltages blindly and hope they work cause that's where you want them to be or somebody said set them there. You have to learn what your components do together.
|
Re:help me overclock my classified plz
2009/12/19 18:32:17
(permalink)
thnx for the advice going to try that now
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
badfastbusa
Superclocked Member
- Total Posts : 137
- Reward points : 0
- Joined: 2009/12/14 08:32:36
- Location: Atoka Oklahoma USA
- Status: offline
- Ribbons : 0
Re:help me overclock my classified plz
2009/12/19 18:37:10
(permalink)
DENTNU
what I really want as my overclock is 4.2 gigs
We need to get 4ghz stable first then we can go for more.
CPU
i7-920 D0 4623mhz 1.43v
CPU cooling
TRUE
MOBO
Classy E760 (S61J)
Memory
3x2gb G.Skill 2000mhz
GPU
XFX 5870
HDD
OCZ Vertex SSD 60GB / Seagate 500GB
Sound
AuzenTech Forte 7.1 / Audio Technica AD700
PSU
Corsair 850TX
Case
Antec 1200
OS
Win 7 Ult 64bit
Monitor
24"Acer/20"Acer
|
Re:help me overclock my classified plz
2009/12/19 18:44:06
(permalink)
see how far I go stable on stock right?
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: offline
- Ribbons : 10
Re:help me overclock my classified plz
2009/12/19 18:50:42
(permalink)
Yes.Except memory set to specs but 2:8
|
Re:help me overclock my classified plz
2009/12/19 19:03:56
(permalink)
ok well so far the highest I have been able to go at all stock voltage is 3.840mhz it l pass linx 5 test at 20000 so guess its stable or run a longer test ? so now what
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: offline
- Ribbons : 10
Re:help me overclock my classified plz
2009/12/19 19:12:33
(permalink)
Now up the vcore a couple notches and see how far that will get you. EDIT: settings below look good. these 2 set to less **CPU Impedance ( Auto ) **QPI Signal Compensation ( Auto ) and go a head and raise these 2 **VTT PWM Frequency ( 250 KHZ ) **CPU PWM Frequency ( 800 KHZ ) sure is not going to hurt anything.
post edited by awalleyeguy - 2009/12/19 19:21:49
|
Re:help me overclock my classified plz
2009/12/19 19:15:21
(permalink)
here are the setting I used for the highest overclock with stock voltage
Mother Board ( EVGA X58 Classified E-760 )
Bios ( S61J )
CPU ( 960 DO)
CPU Cooler ( Prolimatech Mega Shadow )
Memory ( Corsair Dominator GT 1600 7 7 7 20 )
PSU ( Thermaltake 1000w)
GPU ( GTX 295 Co-op )
Drivers ( 195.81 )
Operating System ( Windows 7 x64 Ultimate )
Frequency Control
CPU Clock Ratio ( 24x )
CPU Host Frequency (Mhz) ( 160 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( Auto )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 101 )
Memory Feature
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 1067 / 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 7 )
tRCD Setting ( 7 )
tRP Setting ( 7 )
tRAS Setting ( 20 )
tRFC Setting ( Auto )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( Auto)
CPU VTT Voltage ( Auto )
CPU PLL VCore ( Auto )
**IOH PLL VCore ( Auto )
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( Auto)
QPI PLL VCore ( Auto )
IOH VCore ( Auto )
IOH/ICH I/O Voltage ( Auto )
**VTT PWM Frequency ( 250 KHZ )
**CPU PWM Frequency ( 800 KHZ )
**CPU Impedance ( Auto )
**QPI Signal Compensation ( Auto )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Enabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 GT/s )
OC Recovery ( Enabled )
PnP/PCI PCI Express
Maximum Payload Size ( 2048 )
Power Management Setup
ACPI Suspend Type ( S3 )
HPET Support ( Enabled )
HPET Mode ( 64-bit )
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: offline
- Ribbons : 10
Re:help me overclock my classified plz
2009/12/19 19:26:33
(permalink)
EVGA VDroop Control ( With VDroop )
CPU VCore ( Auto) up this a couple notches from what ever auto is.
CPU VTT Voltage ( Auto ) how about +.50
CPU PLL VCore ( Auto ) 1.5
**IOH PLL VCore ( Auto ) 1.5
DIMM Voltage ( 1.65 )
DIMM DQ Vref ( Auto)
QPI PLL VCore ( Auto )1.3
IOH VCore ( Auto ) 1.150
IOH/ICH I/O Voltage ( Auto) 1.525)
**VTT PWM Frequency ( 250 KHZ ) +1
**CPU PWM Frequency ( 800 KHZ ) +1
**CPU Impedance ( Auto ) less
**QPI Signal Compensation ( Auto ) less Then start upping your Qpi till not stable.
|
Re:help me overclock my classified plz
2009/12/19 19:35:37
(permalink)
CPU PLL VCore ( Auto ) 1.5
**IOH PLL VCore ( Auto ) 1.5
u mean 1.05 or 1.5 ?
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: offline
- Ribbons : 10
Re:help me overclock my classified plz
2009/12/19 19:40:59
(permalink)
1.5 isn't auto 1.8? does not have to be that high and lowering seems to help.
|
Re:help me overclock my classified plz
2009/12/19 19:42:20
(permalink)
ok I applyed the setting u told me to and rised my cpu 2 notches to 162 and I got BSOD about 30 sec in I also saw one of my cores temps went all the way to 75c
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/19 19:45:05
(permalink)
one sec testing agian had wrong voltage settings
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: offline
- Ribbons : 10
Re:help me overclock my classified plz
2009/12/19 19:46:53
(permalink)
Well 75 is still OK not great but OK. What is vcore set at now?
|
Re:help me overclock my classified plz
2009/12/19 19:49:29
(permalink)
ok I got a BSOD that says memory mangement
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/19 19:50:33
(permalink)
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
