Re:help me overclock my classified plz
2009/12/23 16:17:05
(permalink)
ok got it well I am going to try and raise the vdimm with the 2:10 to see if it passes linX 100 pass once I have that stable or I go to a very high vdimm and still not stable I will go try the 2:8 with tighter timings and compare whats faster and stick with whatever I see is a fasterthe reason I am going to try linX is because I really don't feell like wait 12 hour for prime95 to pass
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/23 16:19:34
(permalink)
testing it now with 1.68 vdimm and one thing I already notice is that with it at 1.65 my GFlops was 54.xxx sometimes 55.xxxx now its at 52.xxx doesn't that mean it not stable I remember reading somewhere that once you see the GFlops start going down and not up it means it will most like not be stable is this true?
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/23 16:30:00
(permalink)
Jumped to vdimm 1.69 and GFlops went back up to 54.xxxx will let you know I am doing LinX 100 test so it could be a while let me keep my fingers crossed if it stable will try 2:8 with tighter timings then compare and see whats better
post edited by DENTNU - 2009/12/23 16:34:30
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/23 16:33:12
(permalink)
DENTNU
testing it now with 1.68 vdimm and one thing I already notice is that with it at 1.65 my GFlops was 54.xxx sometimes 55.xxxx now its at 52.xxx doesn't that mean it not stable I remember reading somewhere that once you see the GFlops start going down and not up it means it will most like not be stable is this true?
No. It mostly points to your vcore is a little low and your cpu isnt getting enough voltage to keep running high gflops.
Gigabyte X99 SOC Champion i7 5820K @ 4.6ghz 4x4GB Crucial DDR4 OC to 2667 12-15-15-31 Nvidia 780ti Ref. @ 1325MHz/7.6GHz Corsair 1200AX Power Supply Cooler Master Haf X Case Radiators: GTX 360 Black Ice and MO-RA3 Water Blocks: EK Supreme HF Full Copper and EK VGA Supreme Bridge Edition Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
|
Re:help me overclock my classified plz
2009/12/23 16:35:44
(permalink)
oh so that what it means oh okey got it
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/23 16:49:59
(permalink)
I got tired of trying the 2:10 divider nothing I did would get me stable going to start the 2:8 and tighter timing now
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/23 17:01:43
(permalink)
Gigabyte X99 SOC Champion i7 5820K @ 4.6ghz 4x4GB Crucial DDR4 OC to 2667 12-15-15-31 Nvidia 780ti Ref. @ 1325MHz/7.6GHz Corsair 1200AX Power Supply Cooler Master Haf X Case Radiators: GTX 360 Black Ice and MO-RA3 Water Blocks: EK Supreme HF Full Copper and EK VGA Supreme Bridge Edition Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
|
Re:help me overclock my classified plz
2009/12/23 17:04:36
(permalink)
thanks that will make a good read while I wait
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/23 18:20:30
(permalink)
ok now I am vdimm 1.67 as the lower one I have gotten ethier BSOD or errors will see what happens
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/24 13:26:35
(permalink)
ok I think its 100% Stable I am still running linX but so far its done 56 tests and no errors once it completes the 100 test I will post the settings I used and a pic I am using vdimm 1.73 and the 2:8 divider with the 6-6-6-18 timings
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/24 13:34:27
(permalink)
Nice job. 6-6-6-18 timings is not easy to do on DDR3. Im assuming you tried 1.71 and 1.72 with no luck.
Gigabyte X99 SOC Champion i7 5820K @ 4.6ghz 4x4GB Crucial DDR4 OC to 2667 12-15-15-31 Nvidia 780ti Ref. @ 1325MHz/7.6GHz Corsair 1200AX Power Supply Cooler Master Haf X Case Radiators: GTX 360 Black Ice and MO-RA3 Water Blocks: EK Supreme HF Full Copper and EK VGA Supreme Bridge Edition Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
|
Re:help me overclock my classified plz
2009/12/24 13:35:41
(permalink)
yea I tryed 1.71 and 1.72 and no luck got a BSOD about 6 test to 12 tests in linX
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/24 13:39:44
(permalink)
Ok I know I am very very close as when i hit linX 61 test I got a BSOD so here are the setting I used and I guess I need 1 more notch on the vdimm right?
Mother Board ( EVGA X58 Classified E-760 )
Bios ( S61J )
CPU ( 960 DO)
CPU Cooler ( Prolimatech Mega Shadow )
Memory ( Corsair Dominator GT 1600 7 7 7 20 )
PSU ( Thermaltake 1000w)
GPU ( EVGA GTX 295 Co-op )
Drivers ( 195.81 )
Operating System ( Windows 7 x64 Ultimate )
Frequency Control
CPU Clock Ratio ( 24x )
CPU Host Frequency (Mhz) ( 169 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( Auto )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 101 )
Memory Feature
Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 1067 / 2:8 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 6 )
tRCD Setting ( 6 )
tRP Setting ( 6 )
tRAS Setting ( 18 )
tRFC Setting ( Auto )
Command Rate ( 1T )
Voltage Control
EVGA VDroop Control ( With VDroop )
CPU VCore ( 1.41250v )
CPU VTT Voltage ( +100mv )
CPU PLL VCore ( 1.500v )
**IOH PLL VCore ( 1.500v )
DIMM Voltage ( 1.73 )
DIMM DQ Vref ( Auto) (+0mV)
QPI PLL VCore ( 1.3 )
IOH VCore ( 1.175 )
IOH/ICH I/O Voltage ( 1.525 )
**VTT PWM Frequency ( 370 KHZ )
**CPU PWM Frequency ( 940 KHZ )
**CPU Impedance ( Less )
**QPI Signal Compensation ( Less )
CPU Feature
Intel SpeedStep ( Disabled )
Turbo Mode Function ( Enabled )
CxE Function ( Disabled )
Execute Disable Bit ( Enabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( 4.800 GT/s )
OC Recovery ( Enabled )
PnP/PCI PCI Express
Maximum Payload Size ( 4096 )
Power Management Setup
ACPI Suspend Type ( S3 )
HPET Support ( Enabled )
HPET Mode ( 64-bit )
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/24 14:00:55
(permalink)
I am going to start testing it with prime95 blend test to see what happens the same setting I posted
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: online
- Ribbons : 10
Re:help me overclock my classified plz
2009/12/24 14:33:03
(permalink)
EVGA VDroop Control ( With VDroop )
CPU VCore ( 1.41250v )
CPU VTT Voltage ( +100mv )
CPU PLL VCore ( 1.500v )
**IOH PLL VCore ( 1.500v )
DIMM Voltage ( 1.73 ) This high of a setting puts you above 0.5 of Vtt which means you could fry your CPU. As mentioned earlier in this thread
DIMM DQ Vref ( Auto) (+0mV) vdimm and Vtt should not exceed .5v difference. It's your processor.
QPI PLL VCore ( 1.3 )
IOH VCore ( 1.175 )
IOH/ICH I/O Voltage ( 1.525 )
**VTT PWM Frequency ( 370 KHZ )
**CPU PWM Frequency ( 940 KHZ )
**CPU Impedance ( Less )
**QPI Signal Compensation ( Less )
|
Lvcoyote
CLASSIFIED Member
- Total Posts : 3042
- Reward points : 0
- Joined: 2008/08/09 11:29:45
- Location: Omak, WA
- Status: offline
- Ribbons : 8
Re:help me overclock my classified plz
2009/12/24 15:19:15
(permalink)
61 passes and your not satisfied??.....LOL. Most people run 20 passes and call it good......LOL. I seriously doubt you will have any issues at all with the system passing 61 runs of LinX....... call it good and move on!!
ASUS Maximus VI Impact, i7-4770K, G.Skill TridentX 2X8Gb DDR3-2400, EVGA GTX 750 Ti, EVGA Hadron Hydro w/EVGA Hadron Hydro Water Cooling Kit, Samsung 840 EVO 500 Gb SSD, WD Caviar 500 Gb HDD, Panasonic UJ8C5 Slot Load DVD Burner, Windows 8.1 Pro X64/Linux Mint 16 X64 HEATWARE
|
Re:help me overclock my classified plz
2009/12/24 17:38:57
(permalink)
awalleyeguy
EVGA VDroop Control ( With VDroop )
CPU VCore ( 1.41250v )
CPU VTT Voltage ( +100mv )
CPU PLL VCore ( 1.500v )
**IOH PLL VCore ( 1.500v )
DIMM Voltage ( 1.73 ) This high of a setting puts you above 0.5 of Vtt which means you could fry your CPU. As mentioned earlier in this thread
DIMM DQ Vref ( Auto) (+0mV) vdimm and Vtt should not exceed .5v difference. It's your processor.
QPI PLL VCore ( 1.3 )
IOH VCore ( 1.175 )
IOH/ICH I/O Voltage ( 1.525 )
**VTT PWM Frequency ( 370 KHZ )
**CPU PWM Frequency ( 940 KHZ )
**CPU Impedance ( Less )
**QPI Signal Compensation ( Less )
so what are you saying I do riase the vtt or lower the vdimm or what kinda confuse is to what u want me to do ?
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/24 17:45:09
(permalink)
Lvcoyote
61 passes and your not satisfied??.....LOL. Most people run 20 passes and call it good......LOL. I seriously doubt you will have any issues at all with the system passing 61 runs of LinX....... call it good and move on!!
I want to know my cpu is rock solid like if the setting I am running are the stock setting it is suppose to run at if not then I don't think anyone should overclock there cpu I say alway if you are going to do it do it right if not don't do it but thats just my opinon
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Lvcoyote
CLASSIFIED Member
- Total Posts : 3042
- Reward points : 0
- Joined: 2008/08/09 11:29:45
- Location: Omak, WA
- Status: offline
- Ribbons : 8
Re:help me overclock my classified plz
2009/12/24 17:54:15
(permalink)
Thats my point, I think 60+ passes is about as rock stable as they come........ Have you tried running without Vdroop?? I bet you could lower the CPU volts some if you tried that.
ASUS Maximus VI Impact, i7-4770K, G.Skill TridentX 2X8Gb DDR3-2400, EVGA GTX 750 Ti, EVGA Hadron Hydro w/EVGA Hadron Hydro Water Cooling Kit, Samsung 840 EVO 500 Gb SSD, WD Caviar 500 Gb HDD, Panasonic UJ8C5 Slot Load DVD Burner, Windows 8.1 Pro X64/Linux Mint 16 X64 HEATWARE
|
Re:help me overclock my classified plz
2009/12/24 17:58:01
(permalink)
no I prefer to run it with it on I know that if I take it off it will help with lower volts but there have been alot of evdence that turning it off could damage the cpu so i stay with it on thanks for the advice
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/24 18:15:29
(permalink)
how do u calculate vdimm and Vtt .5v difference ? lol can someone give me an example plz I think the rum has started to affect me already lol thnxs
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: online
- Ribbons : 10
Re:help me overclock my classified plz
2009/12/24 18:16:20
(permalink)
DENTNU
awalleyeguy
EVGA VDroop Control ( With VDroop )
CPU VCore ( 1.41250v )
CPU VTT Voltage ( +100mv )
CPU PLL VCore ( 1.500v )
**IOH PLL VCore ( 1.500v )
DIMM Voltage ( 1.73 ) This high of a setting puts you above 0.5 of Vtt which means you could fry your CPU. As mentioned earlier in this thread
DIMM DQ Vref ( Auto) (+0mV) vdimm and Vtt should not exceed .5v difference. It's your processor.
QPI PLL VCore ( 1.3 )
IOH VCore ( 1.175 )
IOH/ICH I/O Voltage ( 1.525 )
**VTT PWM Frequency ( 370 KHZ )
**CPU PWM Frequency ( 940 KHZ )
**CPU Impedance ( Less )
**QPI Signal Compensation ( Less )
so what are you saying I do riase the vtt or lower the vdimm or what kinda confuse is to what u want me to do ?
I am only pointing out what intel says, heck they also say not to run vdimm over 1.65. But the real issue is voltage difference between Vtt and vdimm. I would try higher Vtt, if you are running your vdimm at 1.73 then you should run Vtt at min of 1.233 or about +.150. I do not know anyone that has fried a cpu, I have heard of it happening though.
post edited by awalleyeguy - 2009/12/24 18:19:14
|
Lvcoyote
CLASSIFIED Member
- Total Posts : 3042
- Reward points : 0
- Joined: 2008/08/09 11:29:45
- Location: Omak, WA
- Status: offline
- Ribbons : 8
Re:help me overclock my classified plz
2009/12/24 18:17:42
(permalink)
DENTNU
no I prefer to run it with it on I know that if I take it off it will help with lower volts but there have been alot of evdence that turning it off could damage the cpu so i stay with it on thanks for the advice
More like there has been a lot of talk, but no evidence or stories of it actually damaging a CPU....... I've had it off since day one, never a single issue. Been since this E759 was released.....
ASUS Maximus VI Impact, i7-4770K, G.Skill TridentX 2X8Gb DDR3-2400, EVGA GTX 750 Ti, EVGA Hadron Hydro w/EVGA Hadron Hydro Water Cooling Kit, Samsung 840 EVO 500 Gb SSD, WD Caviar 500 Gb HDD, Panasonic UJ8C5 Slot Load DVD Burner, Windows 8.1 Pro X64/Linux Mint 16 X64 HEATWARE
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: online
- Ribbons : 10
Re:help me overclock my classified plz
2009/12/24 18:23:34
(permalink)
Until recently I had run with out vdroop, My latest high over clocks have been with and my processor runs much cooler. I suppose 6 of one and half dozen of the other.
|
d.burnette
CLASSIFIED Member
- Total Posts : 3850
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 12
Re:help me overclock my classified plz
2009/12/24 18:29:29
(permalink)
Lvcoyote
Thats my point, I think 60+ passes is about as rock stable as they come........ +1 :)
Don EVGA X-79 DarkIntel I7 4820K @ 4.50 Ghz (+35 Vcore offset) Bios 2.13Corsair H100i cooling systemEVGA GTX 1080 FTW 16 gb (4x4) Corsair Dominator Platinum 2133 MHz 1.5v ram2ea Samsung 840 Pro 256gb SSD's ( non raid)Sound Blaster ZKlipsch 2.1 Pro Media SpeakersNZXT Phantom 820 caseWindows 10 64 Bit
|
Re:help me overclock my classified plz
2009/12/24 18:38:49
(permalink)
awalleyeguy
DENTNU
awalleyeguy
EVGA VDroop Control ( With VDroop )
CPU VCore ( 1.41250v )
CPU VTT Voltage ( +100mv )
CPU PLL VCore ( 1.500v )
**IOH PLL VCore ( 1.500v )
DIMM Voltage ( 1.73 ) This high of a setting puts you above 0.5 of Vtt which means you could fry your CPU. As mentioned earlier in this thread
DIMM DQ Vref ( Auto) (+0mV) vdimm and Vtt should not exceed .5v difference. It's your processor.
QPI PLL VCore ( 1.3 )
IOH VCore ( 1.175 )
IOH/ICH I/O Voltage ( 1.525 )
**VTT PWM Frequency ( 370 KHZ )
**CPU PWM Frequency ( 940 KHZ )
**CPU Impedance ( Less )
**QPI Signal Compensation ( Less )
so what are you saying I do riase the vtt or lower the vdimm or what kinda confuse is to what u want me to do ?
I am only pointing out what intel says, heck they also say not to run vdimm over 1.65. But the real issue is voltage difference between Vtt and vdimm. I would try higher Vtt, if you are running your vdimm at 1.73 then you should run Vtt at min of 1.233 or about +.150. I do not know anyone that has fried a cpu, I have heard of it happening though.
I don't understand when I check eleet it says that my vtt is at 1.3 with +100 in the bios and you just told me that I need it at least 1.233 or about +150 but if eleet shows me its at 1.300v ain't I already over the 1.233 ? I am very confused
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
awalleyeguy
CLASSIFIED Member
- Total Posts : 3216
- Reward points : 0
- Joined: 2007/10/27 09:21:56
- Location: Next door to Elvis
- Status: online
- Ribbons : 10
Re:help me overclock my classified plz
2009/12/24 19:05:55
(permalink)
OK I was looking at the board I am sitting at rite now. If you at at 1.3 then your good.
|
Re:help me overclock my classified plz
2009/12/24 19:11:28
(permalink)
how do u calculate vdimm and Vtt .5v difference ? lol can someone give me an example plz as I don't know how to I think the rum has started to affect me already lol thnxs
post edited by DENTNU - 2009/12/24 19:14:48
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
Re:help me overclock my classified plz
2009/12/24 19:41:25
(permalink)
VTT at +0mv = 1.200 Each mv represents .001. So starting from 1.2 add 99mv you get 1.299, add 100mv and you get 1.300.
100mv = .100
125mv = .125
and so on
so if your vdimm is 1.73 in bios. (1.73) - (.5) = 1.23
1.23 comes out to +30mv. Do not VTT to +25mv or below as this will exceed the .5 difference. I recommend staying above +75mv
Gigabyte X99 SOC Champion i7 5820K @ 4.6ghz 4x4GB Crucial DDR4 OC to 2667 12-15-15-31 Nvidia 780ti Ref. @ 1325MHz/7.6GHz Corsair 1200AX Power Supply Cooler Master Haf X Case Radiators: GTX 360 Black Ice and MO-RA3 Water Blocks: EK Supreme HF Full Copper and EK VGA Supreme Bridge Edition Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
|
Re:help me overclock my classified plz
2009/12/24 19:54:24
(permalink)
CPU: Intel Core i7-5820K @ 4.4 Motherboard: ASUS SABERTOOTH X99 Memory: HyperX 16GB (4 x 4GB) 288-Pin DDR4 3000 Power Supply: Seasonic 1200WATTS Graphics: EVGA GeForce GTX TITAN X SC
|
