v1ral
iCX Member
- Total Posts : 483
- Reward points : 0
- Joined: 2008/07/23 01:11:26
- Status: offline
- Ribbons : 0
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/17 12:27:48
(permalink)
Quite interesting.
Is my waterblock not enough to keep my temps low at least at high 60's.
Is it time to buy a new one?
I've tried to go to 4.2 but my vcore, I think will be high I will try again when I am off or have more spare time. I should have just shot straight to 4.2 when I had my system back in 08 haha.
Anyways I love this platform, so many tweaks and new discoveries with volts and what not.
I've had my vcore at 1.35 with 201 blck it's boots and everything.. starts up fast it's crazy but not IBT stable, I try to run IBT max with 5 runs then run linx 20.. then up that to 50 then just let her do her thing but with that it failed. even if I raise VTT I got it almost to +200 starting from auto then on up to +200 will going passed +200 hurt me in the temp department or should I just wing it. If go to 4.2 I have a feeling that it'll be just for bench runs which I am fine with.
This venture has taught me a few things, what adjustments to use and what works/not work. It's like I have a new rig and trying to overclocking it again.
haha
Anyways..
I am done blabbling
|
OV3RCLK4
CLASSIFIED Member
- Total Posts : 2941
- Reward points : 0
- Joined: 2008/08/29 14:41:44
- Location: Tallahassee, FL
- Status: offline
- Ribbons : 21
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/17 22:36:57
(permalink)
Here is my 4.6ghz OC with HT Off. VTT is @ +50mv (1.25) Uncore is around 3500mhz x16 For every increase of 200mhz on the uncore starting from x16, you need to add at least +50mv. So for my chip, I use this template when overclocking... [3500mhz +50mv] [3700mhz +100mv] [3900mhz +150mv] [4100mhz +200mv] Now keep in mind that this CPU is an excellent overclocker. My previous chip looked like this... [3200mhz +50mv] [3400mhz +100mv] [3600mhz +150mv] [3800mhz 225mv] [4000mhz +300mv] Max OC on old chip was 196x21 2:10 with 1.4375 Vcore, HT ON, Max OC (So far) on my new chip is 220x21 2:8 1.4375, HT OFF Speedstepping is always enabled on my PC, So as soon as i stopped linx, the cpu multiplier dropped down, so that is why it doesnt actually show 4.6ghz, my mistake when taking the screeny. I lowered Vcore to 1.425 and got through 8 tests before I stopped it because my gflops had dropped to 64-65 and not a constant 66 like in my screenshot. 
MSI Unify X i9 12900k @ 5.2ghz 2x16GB GSkill DDR5 6400mhz EVGA 3080ti FTW3 Ultra Gaming Seasonic 850w Titanium Power Supply Radiator: MO-RA3 Water Blocks: EK Supreme HF Full Copper and EK Quantum Vector FTW3 Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/17 22:37:01
(permalink)
Ho ho... I decided to rerun my setup at 4.5GHz with a small Vcore bump by upping just the multiplier. Looks like I am stable with 89ish Gflops. Kram get ready to update my results... Gotta love that little Asetek unit. Can't wait to see what the 920 will get me.
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club 4.2Ghz+ Can you make it?
2011/04/18 00:08:55
(permalink)
Here you go Rafale Core i7 980X Batch # 3032A341 CPU clocked at: 4.5GHz Voltage: 1.412 Idle temps: 25, 16, 26, 34, 32, 22 Load temp: 80, 77, 75, 79, 85, 80 GFlop peak: 88.2306 Ambient temperature: 23C 
post edited by rafale - 2011/04/18 01:09:14
|
B3NJ1
iCX Member
- Total Posts : 332
- Reward points : 0
- Joined: 2009/08/21 07:48:31
- Status: offline
- Ribbons : 1
Re:X58 Stability Club
2011/04/18 02:27:42
(permalink)
B3NJ1 Core i7 920 D0 Batch N/A CPU clocked at: 4210mhz Voltage: 1.376 Idle temps: 42C 42C 45C 40C Load temps: 83C 81C 82C 77C GFlop peak: 54.77 
post edited by B3NJ1 - 2011/04/18 19:56:02
 X58 Classified - E760 ... i7 920 (D0) @ 4210mhz .... G Skill Trident 6gb @ 1600MHz 7-8-7-20 EVGA GTX 570 Superclocked Edition - TRI SLI My Affiliate Code: ZIQXDYRZ56
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re:X58 Stability Club
2011/04/18 03:18:02
(permalink)
rafale, got your stats updated. Nice job.  sam350 and B3NJ1, you guys need to list your info correctly. Please make appropriate changes so I can get you added.
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club
2011/04/18 10:22:53
(permalink)
Damn Rafale I don't understand how you can get your temps so low with such high VCore... teach me your ways of installation plz 
 “The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club
2011/04/18 11:20:42
(permalink)
direraptor22
Damn Rafale I don't understand how you can get your temps so low with such high VCore... teach me your ways of installation plz
You know I am not using the stock fans right? I have GT AP-29 in push with a feser shroud and then a TY 140 pulling... I just followed the instructions for the mounting without reading them. 
post edited by rafale - 2011/04/18 11:40:23
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club
2011/04/18 11:33:13
(permalink)
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club
2011/04/18 11:42:28
(permalink)
I corrected my typo. That's what happens when you are typing with a newborn hanging on your arms. That hot in Austin already huh?
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club
2011/04/18 12:21:06
(permalink)
rafale
That hot in Austin already huh?
Sigh...  Today's high is around 95, tomorrow it gets close to 100. I'm in the wrong part of the world lol
post edited by direraptor22 - 2011/04/18 12:43:54
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
mistermister
CLASSIFIED ULTRA Member
- Total Posts : 5306
- Reward points : 0
- Joined: 2008/03/29 02:38:09
- Location: San Diego
- Status: offline
- Ribbons : 13
Re:X58 Stability Club
2011/04/18 14:19:47
(permalink)
Doesnt help that your state is on fire.
AMD 3700x / X-570 Aorus Ultra / RTX-3090 FTW3
|
PCTools
Superclocked Member
- Total Posts : 218
- Reward points : 0
- Joined: 2007/01/29 21:10:12
- Status: offline
- Ribbons : 3
Re:X58 Stability Club
2011/04/18 17:14:47
(permalink)
PCTools IN PROCESS OF UPDATING TO THE NEWEST SOFTWARE AND WILL REPOST.
post edited by PCTools - 2011/04/18 18:15:51
|
OV3RCLK4
CLASSIFIED Member
- Total Posts : 2941
- Reward points : 0
- Joined: 2008/08/29 14:41:44
- Location: Tallahassee, FL
- Status: offline
- Ribbons : 21
Re:X58 Stability Club
2011/04/18 17:33:22
(permalink)
@PCTools Before you post, go back to the first page and read the instructions 1 more time. You need to use 25000 problem size (not 10000), and a ALL-IN-ONE Screenshot like this. http://i.imgur.com/pDA4H.jpg 
post edited by OV3RCLK4 - 2011/04/18 17:35:35
MSI Unify X i9 12900k @ 5.2ghz 2x16GB GSkill DDR5 6400mhz EVGA 3080ti FTW3 Ultra Gaming Seasonic 850w Titanium Power Supply Radiator: MO-RA3 Water Blocks: EK Supreme HF Full Copper and EK Quantum Vector FTW3 Pump/Res: XSPC Dual Bay Reservoir w/ MCP-655 Pump
|
B3NJ1
iCX Member
- Total Posts : 332
- Reward points : 0
- Joined: 2009/08/21 07:48:31
- Status: offline
- Ribbons : 1
Re:X58 Stability Club
2011/04/18 19:51:52
(permalink)
Edit: Fixed my temps on my post
post edited by B3NJ1 - 2011/04/18 19:56:32
X58 Classified - E760 ... i7 920 (D0) @ 4210mhz .... G Skill Trident 6gb @ 1600MHz 7-8-7-20 EVGA GTX 570 Superclocked Edition - TRI SLI My Affiliate Code: ZIQXDYRZ56
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re:X58 Stability Club
2011/04/18 20:08:55
(permalink)
B3NJ1, got you added.
|
sam350
New Member
- Total Posts : 42
- Reward points : 0
- Joined: 2009/05/15 05:59:21
- Status: offline
- Ribbons : 0
Re:X58 Stability Club
2011/04/19 04:23:49
(permalink)
Sam350 Core i7 990X Batch Unknown CPU clocked at: 4.714GHz Voltage: 1.576 Idle temps: 28,35,26,28,42,36 Load temp: 77,81,71,72,82,80 GFlop peak: 85.93 MY ATTACHED IMAGE SAYS ERROR BUT CAN STILL VIEW WEIRD ALLWAYS U HAVE MY SCREENSHOT FROM LAST TIME
post edited by sam350 - 2011/04/19 04:26:31
Attached Image(s)
i7:990x@4.7ghz 100% stable motherboard: evga x58 classified 3 ram: corsiar 2000mhz 3x6g@ 7-8-7-1T 1700mhz graphics: 3x msi gtx580's@ 870 core 2150 mem air cooled cooling: ek supreme water block cpu, 120.3 rad, 140.1 rad, swiftech pump, xspc resivour 
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re:X58 Stability Club
2011/04/19 04:39:04
(permalink)
sam350, got you added.
|
G__ROW
New Member
- Total Posts : 71
- Reward points : 0
- Joined: 2008/04/27 19:16:26
- Status: offline
- Ribbons : 0
Re:X58 Stability Club
2011/04/19 18:49:30
(permalink)
Couldn't let rafale beat me (at least in clock speed) :P I think this is the furthest I'm going with my current cooling setup. G__ROW Core i7-980x Batch #: 3032A341 CPU clocked at: 4.6 Ghz Voltage: 1.393 Idle temps: 28, 24, 26, 25, 18, 25 Load temps: 83, 82, 75, 78, 80, 81 GFlop peak: 86.5251 
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club
2011/04/19 19:11:46
(permalink)
Ohh man... Not fair, you are on water.  jk' Wait until I get my Antec 920... You have an amazing chip though. Mine from the same batch doesn't clock that well with so little voltage. Congrats!
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re:X58 Stability Club
2011/04/19 19:18:02
(permalink)
Updated listing.
|
G__ROW
New Member
- Total Posts : 71
- Reward points : 0
- Joined: 2008/04/27 19:16:26
- Status: offline
- Ribbons : 0
Re:X58 Stability Club
2011/04/19 19:32:54
(permalink)
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
|
Halo_003
Omnipotent Enthusiast
- Total Posts : 10297
- Reward points : 0
- Joined: 2009/03/20 18:18:10
- Status: offline
- Ribbons : 51
Re:X58 Stability Club
2011/04/19 20:26:22
(permalink)
Nice Rafale I'll be watching for that. Working on stabilizing my 960 at 4.63 right now.. Psst OC... You're in trouble..... I haven't even had this CPU for a week yet, and it does 4.5Ghz @ 1.4V. 
i7 7700K - ASUS Maximus IX Apex - 16GB G.Skill TridentZ RGB 3466MHz C16 - 5700 XT 50th Anniversary
|
EVIIILJ
iCX Member
- Total Posts : 413
- Reward points : 0
- Joined: 2007/03/20 22:06:50
- Status: offline
- Ribbons : 15
Re:X58 Stability Club
2011/04/21 00:13:31
(permalink)
EVIIILJ Core i7 970 CPU clocked at: 4.25Ghz Voltage: 1.352 Load Idle temps: 23, 24, 28, 35, 30, 30 Load temps: 63, 65, 63, 66, 65, 64 GFlop peak: 77.1687
EDIT : Crap, I forgot the damn time... Let me redo it and get back to you in the next couple of days. I'm folding atm and don't want to stop the bigadv6901 until 4/22 in the a.m. I will update this post with the new info and correct screenshot. I of course closed that damn linx window after the screenshot....DOOOHHHH!
post edited by EVIIILJ - 2011/04/21 00:25:34
|
rafale
FTW Member
- Total Posts : 1554
- Reward points : 0
- Joined: 2010/01/09 20:11:47
- Location: Portland, OR
- Status: offline
- Ribbons : 6
Re:X58 Stability Club
2011/04/21 00:21:45
(permalink)
I think we can see your time just fine. no?
|
kram36
The Destroyer
- Total Posts : 20362
- Reward points : 0
- Joined: 2009/10/27 19:00:58
- Location: United States
- Status: offline
- Ribbons : 72
Re:X58 Stability Club
2011/04/21 03:18:01
(permalink)
Nice job EVIIILJ. Welcome to the Club.
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club
2011/04/21 19:37:01
(permalink)
Update on my part: I just received my Dominator RAM today!   Will get rid of my XMS3 and retest stability tonight... actually I'm gonna get right to it now! *shuts off PC*
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
uelreq
New Member
- Total Posts : 26
- Reward points : 0
- Joined: 2007/05/26 10:58:11
- Status: offline
- Ribbons : 0
Re:X58 Stability Club
2011/04/21 21:54:00
(permalink)
I dont like Linx it keeps maken me get bsod can we use something else :)
getting there
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re:X58 Stability Club
2011/04/21 23:09:50
(permalink)
Argh, with the Dominators + exact same BIOS settings I ran with the XMS3 I crashed after 14 passes of LinX, BSOD code 1E (increase vcore)... sigh, bumped my VCore up a notch and retesting... *prays*
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|